Research on the application of 22Na radiolocation detection technology in advanced manufacturing process control
-
Siming Guo
,
Lei Shi
Abstract
This article mainly studies the positioning function of radioactive detection technology in process control for processing devices. The accuracy of 22Na detection is not limited by the spatial area by comparing different illumination scenarios; the accuracy of inspection is independent of the accuracy of machining equipment; the accuracy of the detection is not affected by the conditions of the processed body. This study is of great significance for the future radioactive detection technology to make up for the lack of precision caused by the existing sensor technology on the spatial positioning of the processing device, the illumination environment and the material characteristics of the processed body, and for the process control research in the field of advanced manufacturing.
Funding source: Research Start-Up Fund Projects for Doctoral Staff of Binzhou University
Award Identifier / Grant number: 2020Y22
-
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: This work was funded by Research Start-Up Fund Projects for Doctoral Staff of Binzhou University (2020Y22).
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
Bagheri, R., Yousefi, A., and Shirmardi, S.P. (2020). Study on gamma-ray attenuation characteristics of some amino acids for 133Ba, 137Cs, and 60Co sources. Nucl. Sci. Tech. 31: e19, https://doi.org/10.1007/s41365-020-0725-9.Suche in Google Scholar
Bi, Q., Huang, N., Sun, C., Wang, Y., Zhu, L., and Ding, H. (2015). Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement. Int. J. Mach. Tool Manufact. 89: 182–191, https://doi.org/10.1016/j.ijmachtools.2014.11.008.Suche in Google Scholar
Büyükyıldız, M. (2018). Effect of current intensity on radiological properties of joined 304L stainless steels for photon interaction. Nucl. Sci. Tech. 29: 72–78.10.1007/s41365-017-0353-1Suche in Google Scholar
Chen, D., Dong, L., Bian, Y., and Fan, J. (2015). Prediction and identification of rotary axes error of non-orthogonal five-axis machine tool. Int. J. Mach. Tool Manufact. 94: 74–87, https://doi.org/10.1016/j.ijmachtools.2015.03.010.Suche in Google Scholar
Cheng, C., Jia, W., Hei, D., Geng, S., Wang, H., and Xing, L. (2018). Determination of thickness of wax deposition in oil pipelines using gamma-ray transmission method. Nucl. Sci. Tech. 29: 19–23, https://doi.org/10.1007/s41365-018-0447-4.Suche in Google Scholar
Hu, C., Bai, X., Tang, M., Tang, X., and Zhao, Z. (2019). Non-destructive measurement of magnetic properties of claw pole. Chin. J. Mech. Eng. 32: 33–43, https://doi.org/10.1186/s10033-019-0395-x.Suche in Google Scholar
Huai, S., Zhang, S., Wang, X., and Zhang, J. (2020). A novel adaptive noise resistance method used for AIS real-time signal detection. Chin. J. Electron. 29: 327–336, https://doi.org/10.1049/cje.2020.01.011.Suche in Google Scholar
Lawrence, E.M. (2016). Frontiers of 3D printing/additive manufacturing: from human organs to aircraft fabrication. J. Mater. Sci. Technol. 32: 987–995.10.1016/j.jmst.2016.08.011Suche in Google Scholar
Lee, J.H., Liu, Y., and Yang, S.-H. (2006). Accuracy improvement of miniaturized machine tool: geometric error modeling and compensation. Int. J. Mach. Tool Manufact. 46: 1508–1516, https://doi.org/10.1016/j.ijmachtools.2005.09.004.Suche in Google Scholar
Li, Y. (2015). Transformation of the mould level control system of PZH steel 1# conticaster. Sichuan Metall. 37: 36–40.Suche in Google Scholar
Lin, X., Zhang, X., He, L., and Zheng, W. (2020). Multiple emitters localization by UAV with nested linear array: system scheme and 2D-DOA estimation algorithm. China Commun. 17: 117–130, https://doi.org/10.23919/jcc.2020.03.010.Suche in Google Scholar
Ma, Y., Yu, M., Li, L., Ma, H., Wang, Z., and Li, J. (2015). Reversible addition-fragmentation chain transfer graft polymerization of acrylonitrile onto PE/PET composite fiber initiated by γ-irradiation. Nucl. Sci. Tech. 26: 36–41.Suche in Google Scholar
Shi, R., Tuo, X., Li, H., Xu, Y., Shi, F., Yang, J., and Luo, Y. (2017). Unfolding analysis of LaBr3:Ce gamma spectrum with a detector response matrix constructing algorithm based on energy resolution calibration. Nucl. Sci. Tech. 29: 10–18, https://doi.org/10.1007/s41365-017-0340-6.Suche in Google Scholar
Srinivasa Prasad, B., Siva Prasad, D., Sandeep, A., and Veeraiah, G. (2013). Condition monitoring of CNC machining using adaptive control. Int. J. Autom. Comput. 10: 202–209, https://doi.org/10.1007/s11633-013-0713-1.Suche in Google Scholar
Wang, Y., Chen, H., Chen, F., Yuan, Y., and Peng, T. (2018). Radiation dose detection using a high-power portable optically stimulated luminescence real-time reading system. Nucl. Sci. Tech. 29: e149, https://doi.org/10.1007/s41365-018-0484-z.Suche in Google Scholar
Wu, D., Wang, H., Peng, J., Zhang, K., Yu, J., Zheng, X., and Chen, Y. (2020). Machining fixture for adaptive CNC machining process of near-net-shaped jet engine blade. Chin. J. Aeronaut. 33: 1311–1328, https://doi.org/10.1016/j.cja.2019.06.008.Suche in Google Scholar
Yang, H., Xin, L., Wu, X., Huang, C., and Huang, W. (2011). Laser solid forming repairing and remanufacturing of high strength steel. Rare Met. Mater. Eng. 40: 148–151.Suche in Google Scholar
Zhang, W., Niu, F., Wu, Y., and Guo, Z. (2019). Feasibility analysis of 60Co production in pressurized water reactors. Nucl. Sci. Tech. 30: 107–115, https://doi.org/10.1007/s41365-019-0680-5.Suche in Google Scholar
Zheng, H., Tuo, X., Peng, S., Shi, R., Li, H., Lu, J., and Li, J. (2018). Determination of gamma point source efficiency based on a back-propagation neural network. Nucl. Sci. Tech. 29: 79–87, https://doi.org/10.1007/s41365-018-0410-4.Suche in Google Scholar
© 2022 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- A study of RCS depressurization strategy of CPR1000 SAMG
- Drones application scenarios in a nuclear or radiological emergency
- Safety analysis for integrity enhancement in nuclear power plants (NPPs) in case of seashore region site
- Frictional wear characteristics of nickel-based alloy and reactor material in pressure vessel reactor
- Improving FNMC for the matrix effect of spherical shell plutonium samples
- Calculation of core neutronic parameters in electron accelerator driven subcritical TRIGA reactor
- Preliminary study on TRU transmutation in VVER-1000 fuel assembly using MCNP6
- Research on the application of 22Na radiolocation detection technology in advanced manufacturing process control
- Coupling MCNP6/ANSYS codes to calculate axial temperature and power distribution in a VVER-1000 fuel assembly
- Experimental and theoretical investigation of forced convection heat transfer with CNTs and CuO water based nano-fluids
- Thermal hydraulic characteristics of silicon irradiation in a typical MTR reactor
- Photon dosimetry using selective data sampling with Particle Swarm optimization algorithm based on NaI(Tl) scintillation detector
- Calendar of events
Artikel in diesem Heft
- Frontmatter
- A study of RCS depressurization strategy of CPR1000 SAMG
- Drones application scenarios in a nuclear or radiological emergency
- Safety analysis for integrity enhancement in nuclear power plants (NPPs) in case of seashore region site
- Frictional wear characteristics of nickel-based alloy and reactor material in pressure vessel reactor
- Improving FNMC for the matrix effect of spherical shell plutonium samples
- Calculation of core neutronic parameters in electron accelerator driven subcritical TRIGA reactor
- Preliminary study on TRU transmutation in VVER-1000 fuel assembly using MCNP6
- Research on the application of 22Na radiolocation detection technology in advanced manufacturing process control
- Coupling MCNP6/ANSYS codes to calculate axial temperature and power distribution in a VVER-1000 fuel assembly
- Experimental and theoretical investigation of forced convection heat transfer with CNTs and CuO water based nano-fluids
- Thermal hydraulic characteristics of silicon irradiation in a typical MTR reactor
- Photon dosimetry using selective data sampling with Particle Swarm optimization algorithm based on NaI(Tl) scintillation detector
- Calendar of events
