IoT-Based Health Monitoring System Using BeagleBone Black with Optical Sensor
-
K. Durga Saranya
Abstract
There is an increase in the number of chronic and heart diseases due to work culture etc. The current hospital-centric system is becoming inefficient to treat patients that demand immediate attention and this can efficiently be implemented by using the Internet of Things (IoT) technology. The aim of this paper is to implement IoT-based health monitoring system which measures temperature, blood pressure, and heartbeat of a patient located remotely and send the data to the doctor for analyzing the condition of the patient. And also an optical light sensor is used to check the light condition in the patient room and based on the sensor value the light will be controlled (ON/OFF). The system is implemented using a BeagleBone Black (BBB) development board. This model saves the work time of the doctors to check the patient’s condition. By using the Global System for Mobile communication (GSM), the patient’s data is sent to the cloud through which the doctor can monitor the parameters anywhere in the world using the mobile application or web page.
References
1. Patel1 KK, Patel2 SM. Faculty of technology and engineering-MSU, Vadodara, Gujarat, India “Internet of things-IOT: definition, characteristics, architecture, enabling technologies, and application & future challenges”. DOI:10.4010/2016.1482 ISSN 2321 3361 © 2016 IJESC.Suche in Google Scholar
2. Srikanth Ch, Pradeep DSM, Sreeram Charan K. Smart Embedded medical diagnosis using Beagle Boneblack and Arduino. Int J Eng Trends Technol (IJETT). 2014;8:43–8.10.14445/22315381/IJETT-V8P209Suche in Google Scholar
3. Rizal A, Hadiyoso S. ECG signal classification using hjorth descriptor. In 2015 International Conference on automation, cognitive science, optics, micro electro-mechanical system, and information technology (ICACOMIT). 2015 no. 2: 3–6.10.1109/ICACOMIT.2015.7440181Suche in Google Scholar
4. Park S, Jayaraman S. Enhancing the quality of life through wearable technology. IEEE Eng Med Biol Mag. 2003;22:41–8.10.1109/MEMB.2003.1213625Suche in Google Scholar
5. Yin Y, Zeng Y, Chen X, Fan Y. The internet of things in healthcare: an overview. J Ind Inf Integr. 2016;1:3–13.10.1016/j.jii.2016.03.004Suche in Google Scholar
6. Pereira M, Nagapriya Kamath K. A novel IoT based health monitoring system using LPC2129. 2017 2nd IEEE International Conference on recent trends in electronics information & communication technology (RTEICT).10.1109/RTEICT.2017.8256660Suche in Google Scholar
7. Uddin MS, Alam JB, Banu S. Real time patient monitoring system based on internet of things. Proceedings of the 2017 4th International Conference on advances in electrical engineering (ICAEE). 28-30 Sept, Dhaka, Bangladesh: IEEE.10.1109/ICAEE.2017.8255410Suche in Google Scholar
8. Kumar R, Rajasekaran MP. Professor/IEEE member “An IOT based patient monitoring system using raspberry pi”- Department of electronics and communication engineering Kalasalingam University Tamilnadu, India: IEEE, 2017.Suche in Google Scholar
9. Divakaran S, Manukonda L, Sravya N, Morais MM, Janani P. IOT clinic-internet based patient monitoring and diagnosis system. Department of Biomedical Engineering, School of Bio and Chemical Engineering, Sathyabama University, Chennai, IEEE International Conference on Power, Control, Signals and Instrumentation Engineering (ICPCSI-2017).10.1109/ICPCSI.2017.8392243Suche in Google Scholar
10. Mamun KA, Sharma A, Hoque ASM, Szecsi T. Remote patient physical condition monitoring service module for iWARD hospital robots. Asia-Pacific world congress on computer science and engineering. 2014.10.1109/APWCCSE.2014.7053854Suche in Google Scholar
11. Preventive solutions. Available at: http://www.preventicesolutions.com. Accessed: 4 Nov 2015.Suche in Google Scholar
12. Jassas MS, Qasem, Mahmoud QH. A smart system connecting-health sensors and the cloud. 2015 IEEE 28th Canadian Conference on Electrical and Computer Engineering (CCECE).10.1109/CCECE.2015.7129362Suche in Google Scholar
13. Mansor H, Shukor MHA, Meskam SS, Rusli NQAM, Zamery NS. Body temperature measurement for remote health monitoring system. 2013 IEEE International conference on smart instrumentation, measurement and applications (ICSIMA).10.1109/ICSIMA.2013.6717956Suche in Google Scholar
14. Kumar KM, Venkatesan RS. A design approach to smart health monitoring using android mobile devices. 2014 IEEE International Conference on advanced communications, control and computing technologies.10.1109/ICACCCT.2014.7019406Suche in Google Scholar
© 2019 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Amplifiers
- Fourth-generation Bidirectional Wireless Hybrid Transmission System Employing Power-Doubler-Amplifier and Data Comparator
- Devices
- PAPR Reduction for O-OFDM UOWC System
- An All Optical OR Gate Using BPSK Technique Inside 2D Photonic Crystals
- Optical Scheme of Obtaining Highest Transmission Factor in Case of KDP Based Electro-Optic Crystal by the Adjustment of Suitable Biasing Voltage and Number of Feedback Passing
- Evaluation of Chirped Fiber Bragg Grating with APD on Designed Optical Fiber Communication Link
- Design of Linear Block Code Encoder and Decoder Using Electro-optical and All-optical Units
- Fibers
- Chirped Large Mode Area Photonic Crystal Modal Fibers and its Resonance Modes Based on Finite Element Technique
- Lasers
- Radio Over Fiber-Based Wavelength Division Multiplexed/Time Division Multiplexed Passive Optical Network Architecture Employing Mutual Injection Locked Fabry-Perot Laser Diodes
- Networks
- High Speed Passive Optical Network Based Elastic Optical Communication System
- Hamiltonian Graph Analysis – Mixed Integer Linear Programming (HGA-MILP) Based Link Failure Detection System in Optical Data Center Networks
- IoT-Based Health Monitoring System Using BeagleBone Black with Optical Sensor
- Systems
- Performance Analysis of a STBC FDM FSO Communication System with Direct Detection Receiver under Turbulent Condition
- Transmission Reliability of Wireless Communication System-Based on Optical Fiber Signal Processing
- Crosstalk Limitations due to Intercore Coupling on the BER Performance of an Optical Communication System with Homogeneous Multi-core Fiber
- High Speed 2 × 10 Gbps WDM Enabled Inter-Satellite Optical Wireless Communication Link
- Theory
- Performance Analysis of FSO DF Relays with Log-Normal Fading Channel
- Pointing Error Effects on Mixed RF-FSO Link
Artikel in diesem Heft
- Frontmatter
- Amplifiers
- Fourth-generation Bidirectional Wireless Hybrid Transmission System Employing Power-Doubler-Amplifier and Data Comparator
- Devices
- PAPR Reduction for O-OFDM UOWC System
- An All Optical OR Gate Using BPSK Technique Inside 2D Photonic Crystals
- Optical Scheme of Obtaining Highest Transmission Factor in Case of KDP Based Electro-Optic Crystal by the Adjustment of Suitable Biasing Voltage and Number of Feedback Passing
- Evaluation of Chirped Fiber Bragg Grating with APD on Designed Optical Fiber Communication Link
- Design of Linear Block Code Encoder and Decoder Using Electro-optical and All-optical Units
- Fibers
- Chirped Large Mode Area Photonic Crystal Modal Fibers and its Resonance Modes Based on Finite Element Technique
- Lasers
- Radio Over Fiber-Based Wavelength Division Multiplexed/Time Division Multiplexed Passive Optical Network Architecture Employing Mutual Injection Locked Fabry-Perot Laser Diodes
- Networks
- High Speed Passive Optical Network Based Elastic Optical Communication System
- Hamiltonian Graph Analysis – Mixed Integer Linear Programming (HGA-MILP) Based Link Failure Detection System in Optical Data Center Networks
- IoT-Based Health Monitoring System Using BeagleBone Black with Optical Sensor
- Systems
- Performance Analysis of a STBC FDM FSO Communication System with Direct Detection Receiver under Turbulent Condition
- Transmission Reliability of Wireless Communication System-Based on Optical Fiber Signal Processing
- Crosstalk Limitations due to Intercore Coupling on the BER Performance of an Optical Communication System with Homogeneous Multi-core Fiber
- High Speed 2 × 10 Gbps WDM Enabled Inter-Satellite Optical Wireless Communication Link
- Theory
- Performance Analysis of FSO DF Relays with Log-Normal Fading Channel
- Pointing Error Effects on Mixed RF-FSO Link
