Home Influences of Reactor Geometry on Ozone Production with Dielectric Barrier Discharges: Experimental and Simulation Studies
Article
Licensed
Unlicensed Requires Authentication

Influences of Reactor Geometry on Ozone Production with Dielectric Barrier Discharges: Experimental and Simulation Studies

  • How Ming Lee EMAIL logo and Moo Been Chang
Published/Copyright: November 30, 2016
Become an author with De Gruyter Brill

Abstract

This study developed a model to simulate ozone synthesis in dry oxygen streams with a coaxial dielectric barrier discharge (DBD) reactor. Analyzing ozone synthesis chemistry, we found that fast quenching metastable species seems favorable for ozone production. This interpretation was successfully confirmed by the experiment conducted with a packed-bed DBD reactor. Ozone concentration generated by the packed-bed DBD reactor was significantly enhanced compared to non-packed one. Model simulations were carried out to elucidate the effects of reactor geometries on ozone synthesis. Parameters in the simulation include radii of inner and outer electrodes, dielectric thickness, dielectric constant, and discharge gap. More details regarding their effects were extensively discussed in the paper. In brief, a DBD reactor with a thinner dielectric thickness and/ or a greater dielectric constant could achieve higher ozone yields.

Received: 2004-12-2
Revised: 2004-9-16
Accepted: 2004-12-23
Published Online: 2016-11-30
Published in Print: 2005-7-1

© 2016 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Preface
  2. The Oxidation of Carbon Soot in a Non-thermal, Atmospheric Pressure Plasma: Experiment and Modelling
  3. Study in Space and Time of the Gas Temperature Variations in Dielectric Barrier Discharge Reactors
  4. Removal of Phenol from Water: A Comparison of Energization Methods
  5. Non Thermal Plasma NOx Remediation: From Binary Gas Mixture to Lean-Burn Gasoline and Diesel Engine Exhaust
  6. Influences of Reactor Geometry on Ozone Production with Dielectric Barrier Discharges: Experimental and Simulation Studies
  7. Ozone Production by Primary and Secondary Streamers in Pulsed Positive Corona Discharge
  8. Hybrid Gas/Liquid Electrical Discharge Reactors with Zeolites for Colored Wastewater Degradation
  9. CF4/O2/He Reaction Chemistry in an Atmospheric Pressure Plasma Jet
  10. Enhancement of Propane Flame Stability by Dielectric Barrier Discharges
  11. Soot Free Non-Thermal Plasma Reforming of Hydro Carbon Gas by Flow Stabilized Corona Discharges
  12. Decoloration of Organic Dye in Water by Pulsed Discharge Plasma Generated Simultaneously in Gas and Liquid Media
  13. The Effect of Conductivity on Active Species Products by Electrical Discharge with Air Bubbles in Water
  14. The Role of Surface Reactions in De-NOx Processes in Corona Discharge-Catalyst (or Zeolite) Hybrid Systems
  15. Characteristics of DC Corona Streamers Induced by UV Laser Irradiation in Non-Thermal Plasma
  16. Decomposition of Gas-Phase Benzene Using Plasma – Driven Catalyst Reactor: Complete Oxidation of Adsorbed Benzene Using Oxygen Plasma
  17. A Solution to the Problem of Large Energy Consumption of the De-NOx Process by Non-Thermal Plasma
  18. DC and Pulsed Surface Corona Discharge along a Dielectric Flat Plate in Air: Electrical Properties and Discharge-Induced Ionic Wind
  19. Dependence of NOx Removal by Pulsed Streamer Discharge on the Input Energy Density to Nitric Oxide Ratio
  20. After-Treatment of NOx Using Combination of Non-Thermal Plasma and Oxidative Catalyst Prepared by Novel Impregnation
Downloaded on 13.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/jaots-2005-0206/html
Scroll to top button