Performance enhancement of ternary epoxy hybrid composites with rice husk bio-filler
-
Basithrahman Abbas
,
Vijay Kumar Mahakur
Abstract
The study explores the effect of rice husk biofiller on the hydration, mechanical, and wear properties of ternary fiber-reinforced epoxy hybrid composites composed of jute, kevlar, and basalt fibers. Composites were fabricated via hand layup and compression, with varying stacking sequences and biofiller content (2 % and 4 %). FTIR analysis confirmed that biofiller addition and fiber stacking variations did not alter composite functional groups. Water absorption tests showed that the composite with stacking sequence K-J-B-K-J-J-K-B-J-K and 4 % biofiller (H4) exhibited the lowest water uptake at 3.2 %, indicating enhanced hydration resistance. Mechanical testing revealed that H4 also achieved the highest tensile strength (137.9 N/mm2), flexural strength (225.9 N/mm2), and impact strength (179 kJ/m2), demonstrating superior load-bearing and toughness characteristics. Conversely, the composite with stacking sequence B-J-K-B-J-J-B-K-J-B and 4 % biofiller (H3) displayed the highest hardness (86.2 Shore D) and the lowest coefficient of friction (0.30), signifying excellent wear resistance. These results suggest that the synergistic combination of ternary fiber stacking and rice husk biofiller optimizes composite performance, making H3 and H4 promising candidates for lightweight, durable automotive interior and exterior components, advancing sustainable composite material development.
-
Research ethics: Not applicable.
-
Informed consent: Not applicable.
-
Author contributions: All authors contributed equally to this manuscript. All authors have accepted responsibility for the entire content of this manuscript and approved its submission.
-
Use of Large Language Models, AI and Machine Learning Tools: None declared.
-
Conflict of interest: The authors state no conflict of interest.
-
Research funding: None declared.
-
Data availability: Any data related to this manuscript can be made available on request.
References
Al-Maharma, A.Y. and Sendur, P. (2018). Review of the main factors controlling the fracture toughness and impact strength properties of natural composites. Mater. Res. Express 6: 022001, https://doi.org/10.1088/2053-1591/aaec28.Suche in Google Scholar
Alshahrani, H. and Prakash, V.A. (2022). Thermal, mechanical and barrier properties of rice husk ash biosilica toughened epoxy biocomposite coating for structural application. Prog. Org. Coat. 172: 107080, https://doi.org/10.1016/j.porgcoat.2022.107080.Suche in Google Scholar
Amir, S.M.M., Sultan, M., Jawaid, M., Ariffin, A.H., Mohd, S., Salleh, K.A.M., Ishak, M.R., and Shah, A.U.M. (2019). Chapter 16 nondestructive testing method for Kevlar and natural fiber and their hybrid composites. In: Durability and life prediction in biocomposites, fibre-reinforced composites and hybrid composites. Elsevier, Boulevard, United Kingdom, pp. 367–388.10.1016/B978-0-08-102290-0.00016-7Suche in Google Scholar
Anand, P., Rajesh, D., Senthil Kumar, M., and Saran Raj, I. (2018). Investigations on the performances of treated jute/kenaf hybrid natural fiber reinforced epoxy composite. J. Polym. Res. 25: 1–9, https://doi.org/10.1007/s10965-018-1494-6.Suche in Google Scholar
Atiqah, A., Maleque, M., Jawaid, M., and Iqbal, M. (2014). Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Compos. B Eng. 56: 68–73, https://doi.org/10.1016/j.compositesb.2013.08.019.Suche in Google Scholar
Atmakuri, A., Palevicius, A., Kolli, L., Vilkauskas, A., and Janusas, G. (2021). Development and analysis of mechanical properties of caryota and sisal natural fibers reinforced epoxy hybrid composites. Polymers 13: 864, https://doi.org/10.3390/polym13060864.Suche in Google Scholar PubMed PubMed Central
Bhanupratap, R. (2020). Study on characterization and sorption behavior of jute reinforced epoxy composite: hybridization effect of Kevlar fabric. Mater. Today Proc. 27: 2017–2021, https://doi.org/10.1016/j.matpr.2019.09.050.Suche in Google Scholar
Davim, J.P. (2011). Tribology for engineers: a practical guide. Wood head Publishing, Cambridge.10.1533/9780857091444Suche in Google Scholar
Davim, J.P. (2013). Wear of advanced materials. John Wiley & Sons, Inc., Hoboken, USA.10.1002/9781118562093Suche in Google Scholar
Dev, B., Rahman, M.A., Khan, A.N., Siddique, A.B., Alam, M.R., and Rahman, M.Z. (2024). Eggshell bio‐filler integration in jute/banana fiber‐reinforced epoxy hybrid composites: fabrication and characterization. J. Appl. Polym. Sc.i. 141: e56155, https://doi.org/10.1002/app.56155.Suche in Google Scholar
Devireddy, S.B.R. and Biswas, S. (2017). Physical and mechanical behavior of unidirectional banana/jute fiber reinforced epoxy based hybrid composites. Polym. Compos. 38: 1396–1403, https://doi.org/10.1002/pc.23706.Suche in Google Scholar
Dong, C. and Davies, I.J. (2012). Flexural properties of glass and carbon fiber reinforced epoxy hybrid composites. Proc. Inst. Mech. Eng. L J. Mater. Des. Appl. 227: 308–317, https://doi.org/10.1177/1464420712459396.Suche in Google Scholar
Govindan, V., Periyagounder, K., Shanmugam, K., and Shanmugam, P. (2025). Development and characterization of glass fiber composites impregnated with limestone powder and bagasse fiber. Int. Polym. Process. 40: 43–51, https://doi.org/10.1515/ipp-2023-4427.Suche in Google Scholar
Gunwant, D. (2024). Moisture resistance treatments of natural fiber-reinforced composites: a review. Compos. Interfaces. 31: 979–1047, https://doi.org/10.1080/09276440.2024.2303543.Suche in Google Scholar
Hangargi, S., Swamy, A., Raj, R.G., Aruna, M., Venkatesh, R., Madhu, S., Obaid, S.A., Alharbi, S.A., and Kalam, M.A. (2023). Enhancement of Kevlar fiber-polypropylene composite by the inclusions of cotton stalk and granite particle: characteristics study. Biomass Conv. Bioref. 14: 30305–30314, https://doi.org/10.1007/s13399-023-04817-2.Suche in Google Scholar
Huang, J.K. and Young, W.B. (2019). The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites. Compos. B Eng. 166: 272–283, https://doi.org/10.1016/j.compositesb.2018.12.013.Suche in Google Scholar
Johar, N., Ahmad, I., and Dufresne, A. (2012). Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk. Ind. Crops. Prod. 37: 93–99, https://doi.org/10.1016/j.indcrop.2011.12.016.Suche in Google Scholar
Karthi, N., Kumaresan, K., Sathish, S., Prabhu, L., Gokulkumar, S., Balaji, D., Vigneshkumar, N., Rohinth, S., Rafiq, S., Muniyaraj, S., et al.. (2021). Effect of weight fraction on the mechanical properties of flax and jute fibers reinforced epoxy hybrid composites. Mater. Today Proc. 45: 8006–8010, https://doi.org/10.1016/j.matpr.2020.12.1060.Suche in Google Scholar
Kennedy, S.M., Arunachalam, V., and Kannan, A. (2024). A novel carbon‐flax bioepoxy hybrid composite bone plate with enhanced bio‐mechanical performance. Materialwiss. Enschaft Werkst. 55: 508–517, https://doi.org/10.1002/mawe.202300230.Suche in Google Scholar
Khanam, P.N., Khalil, H.P.S.A., Jawaid, M., Reddy, G.R., Narayana, C.S., and Naidu, S.V. (2010). Sisal/carbon fibre reinforced hybrid composites: tensile, flexural and chemical resistance properties. J. Polym. Environ. 18: 727–733, https://doi.org/10.1007/s10924-010-0210-3.Suche in Google Scholar
Lin, G.S.S., Cher, C.Y., Cheah, K.K., Noorani, T.Y., Ismail, N.H., and Ghani, N.R.N.A. (2021). Novel dental composite resin derived from rice husk natural biowaste: a systematic review and recommendation for future advancement. J. Esthet. Rest. Dentistry. 34: 503–511, https://doi.org/10.1111/jerd.12831.Suche in Google Scholar PubMed
Ma, G., Yan, L., Shen, W., Zhu, D., Huang, L., and Kasal, B. (2018). Effects of water, alkali solution and temperature ageing on water absorption, morphology and mechanical properties of natural FRP composites: plant-based jute vs. mineral-based basalt. Compos. B: Eng. 153: 398–412, https://doi.org/10.1016/j.compositesb.2018.09.015.Suche in Google Scholar
Mahakur, V.K., Bhowmik, S., and Patowari, P.K. (2023a). Decision making approaches for recognizing the optimal alkalized corchorus olitorius powder based composites for sustainable applications. Phys. Scr. 98: 125308, https://doi.org/10.1088/1402-4896/ad094e.Suche in Google Scholar
Mahakur, V.K., Bhowmik, S., and Patowari, P.K. (2024). Impact of silanization on the characterization of Corchorus olitorius particle‐based composites for sustainable applications. Polym. Int. 73: 270–279, https://doi.org/10.1002/pi.6589.Suche in Google Scholar
Mahakur, V.K., Bhowmik, S., and Patowari, P.K. (2022). Machining parametric study on the natural fiber reinforced composites: a review. Proc. Inst. Mech. Eng. C Mech. Eng. Sci. 236: 6232–6249, https://doi.org/10.1177/09544062211063752.Suche in Google Scholar
Mahakur, V.K., Bhowmik, S., and Patowari, P.K. (2023b). Tribo-informatics evaluation of dry sliding friction of silanized jute filler reinforced epoxy composites using machine learning techniques. Tribol. Int. 183: 108388, https://doi.org/10.1016/j.triboint.2023.108388.Suche in Google Scholar
Mahakur, V.K., Kumar, S., Bhowmik, S., and Patowari, P.K. (2025). Experimental evaluation of physicomechanical, tribological and optimality circumstances for corchorus olitorius particle‐based composites. Polym. Int. 74: 127–139, https://doi.org/10.1002/pi.6695.Suche in Google Scholar
Maharana, S.M., Samal, P., Dehury, J., and Mohanty, P.P. (2020). Effect of fiber content and orientation on mechanical properties of epoxy composites reinforced with jute and Kevlar. Mater. Today. Proc. 26: 273–277, https://doi.org/10.1016/j.matpr.2019.11.239.Suche in Google Scholar
Majeed, K., Ahmed, A., Bakar, M.S.A., Mahlia, T.M.I., Saba, N., Hassan, A., Jawaid, M., Hussain, M., Iqbal, J., and Ali, Z. (2019). Mechanical and thermal properties of montmorillonite-reinforced polypropylene/rice husk hybrid nanocomposites. Polym. 11: 1557, https://doi.org/10.3390/polym11101557.Suche in Google Scholar PubMed PubMed Central
Makul, N. (2019). Combined use of untreated-waste rice husk ash and foundry sand waste in high-performance self-consolidating concrete. Results Mater. 1: 100014, https://doi.org/10.1016/j.rinma.2019.100014.Suche in Google Scholar
Mani, M., Mani, S.K., Arockiasamy, F.S., Sivanantham, G., and Iyyadurai, J. (2025 In press). A review on the effect of fiber treatment and fillers on mechanical properties of kenaf fiber–reinforced composites. Int. Polym. Process., https://doi.org/10.1515/ipp-2025-0006.Suche in Google Scholar
Monjon, A., Santos, P., Valvez, S., and Reis, P.N. (2022). Hybridization effects on bending and interlaminar shear strength of composite laminates. Materials 15: 1302, https://doi.org/10.3390/ma15041302.Suche in Google Scholar PubMed PubMed Central
Nachippan, N.M., Alphonse, M., Raja, V.B., Shasidhar, S., Teja, G.V., and Reddy, R.H. (2021). Experimental investigation of hemp fiber hybrid composite material for automotive application. Mater. Today Proc. 44: 3666–3672, https://doi.org/10.1016/j.matpr.2020.10.798.Suche in Google Scholar
Nalini, S.R., Sridevi, B., and Giri, R. (2024). Experimental investigation of mechanical properties of Moringa oleifera gum filler reinforced bio polymer composite. ES Food Agrofor. 18: 1246, https://doi.org/10.30919/esfaf1246.Suche in Google Scholar
Poli, A.L., Batista, T., Schmitt, C.C., Gessner, F., and Neumann, M.G. (2008). Effect of sonication on the particle size of montmorillonite clays. J. Colloid Inter. Sci. 325: 386–390, https://doi.org/10.1016/j.jcis.2008.06.016.Suche in Google Scholar PubMed
Prabhu, P., Karthikeyan, B., Vannan, R.R.R.M., and Balaji, A. (2024). Mechanical, thermal and morphological analysis of hybrid natural and glass fiber-reinforced hybrid resin nanocomposites. Biomass Convers. Biorefin. 14: 4941–4955, https://doi.org/10.1007/s13399-022-02632-9.Suche in Google Scholar
Premnath, A.A. (2019). Impact of surface treatment on the mechanical properties of sisal and jute reinforced with epoxy resin natural fiber hybrid composites. J. Nat. Fibers 16: 718–728, https://doi.org/10.1080/15440478.2018.1432002.Suche in Google Scholar
Priyanka, P., Mali, H.S., and Dixit, A. (2020). Dynamic mechanical behaviour of kevlar and carbon-kevlar hybrid fibre reinforced polymer composites. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 235: 4181–4193, https://doi.org/10.1177/0954406220970600.Suche in Google Scholar
Raghu, N., Kale, A., Chauhan, S., and Aggarwal, P.K. (2018). Rice husk reinforced polypropylene composites: mechanical, morphological and thermal properties. J. Indian Acad. Wood Sci. 15: 96–104, https://doi.org/10.1007/s13196-018-0212-7.Suche in Google Scholar
Raj, H., Tripathi, S., Bauri, S., Choudhury, A. M., Mandal, S.S., and Maiti, P. (2023). Green composites using naturally occurring fibers: a comprehensive review. Sustain. Polym. Energy 1: 10010, https://doi.org/10.35534/spe.2023.10010.Suche in Google Scholar
Ramesh, V., Karthik, K., Arunkumar, K., Unnam, N.K., Ganesh, R., and Rajkumar, C. (2023). Effect of sawdust filler with Kevlar/basalt fiber on the mechanical properties epoxy-based polymer composite materials. Mater. Today Proc. 72: 2225–2230, https://doi.org/10.1016/j.matpr.2022.09.208.Suche in Google Scholar
Rathinavel, S., Basithrahman, A., Karthikeyan, J., Banu, T., Senthilkumar, S., and Senthilkumar, T.S. (2024a). Chemical treatment effect on hydration and mechanical properties of basalt and Kevlar fiber-epoxy-based hybrid composites. Biomass Conv. Bioref. 15: 10719–10731, https://doi.org/10.1007/s13399-024-05933-3.Suche in Google Scholar
Rathinavel, S., Saravankumar, S.S., Senthilkumar, T.S., Barile, C., Kumar, S.S., and Prithviraj, M. (2024b). Utilization of bio-waste material pomegranate peel powder along with silver nitrate and polyvinyl alcohol to form a hybrid biofilm. Biomass Conv. Bioref. 14: 24305–24316, https://doi.org/10.1007/s13399-023-04435-y.Suche in Google Scholar
Sahayaraj, A.F., Muthukrishnan, M., Ramesh, M., and Rajeshkumar, L. (2021). Effect of hybridization on properties of tamarind (Tamarindus indica L.) seed nano‐powder incorporated jute‐hemp fibers reinforced epoxy composites. Polym. Compos. 42: 6611–6620, https://doi.org/10.1002/pc.26326.Suche in Google Scholar
Saravanan, P., Josephraj, J., Thillainayagam, B.P., and Ravindiran, G. (2021). Evaluation of the adsorptive removal of cationic dyes by greening biochar derived from agricultural bio-waste of rice husk. Biomass Conver. Biorefin. 13: 4047–4060, https://doi.org/10.1007/s13399-021-01415-y.Suche in Google Scholar
Sathish, S., Ganapathy, T., and Bhoopathy, T. (2014). Experimental testing on hybrid composite materials. Appl. Mech. Mater. 592: 339–343, https://doi.org/10.4028/www.scientific.net/amm.592-594.339.Suche in Google Scholar
Senthil Muthu Kumar, T., Senthilkumar, K., Chandrasekar, M., Subramaniam, S., Mavinkere Rangappa, S., Siengchin, S., and Rajini, N. (2020). Chapter 5 influence of fillers on the thermal and mechanical properties of biocomposites: an overview. In: Biofibers and biopolymers for biocomposite. Springer, Charm, pp. 111–133.10.1007/978-3-030-40301-0_5Suche in Google Scholar
Singh, T.J. and Samanta, S. (2015). Characterization of kevlar fiber and its composites: a review. Mater. Today Proc. 2: 1381–1387, https://doi.org/10.1016/j.matpr.2015.07.057.Suche in Google Scholar
Singh, H. and Singh, T. (2019). Effect of fillers of various sizes on mechanical characterization of natural fiber polymer hybrid composites: a review. Compos. B Eng. 18: 5345–5350, https://doi.org/10.1016/j.matpr.2019.07.560.Suche in Google Scholar
Soundararajan, R., Sathishkumar, A., Sivasankaran, S., Shanthosh, G., and Karthik, S. (2022). Evaluation of microstructures, mechanical and dry-sliding wear performance of A356-(fly ash/SiCp) hybrid composites. Int. J. Metalcast. 16: 2079–2096, https://doi.org/10.1007/s40962-021-00731-3.Suche in Google Scholar
Subramanian, M., Arunkumar, N., Rethnam, G.S.N., and Balasubramanian, T. (2021). Exploration of the damping characteristics of basalt hybrid composites reinforced with natural fibers and epoxy resin. Fibers Polym. 22: 1684–1692, https://doi.org/10.1007/s12221-021-0761-z.Suche in Google Scholar
Venkatesh, R., Ballal, S., Krishnan, A.M., Prabagaran, S., Mohankumar, S., and Ramaraj, E. (2023). Effect of fiber layer formation on mechanical and wear properties of natural fiber filled epoxy hybrid composites. Heliyon 9: e15934, https://doi.org/10.1016/j.heliyon.2023.me15934.Suche in Google Scholar
© 2025 Walter de Gruyter GmbH, Berlin/Boston
