Mechanical characterization of randomly oriented short Sansevieria Trifasciata natural fibre composites

References

Ahmad, I., Baharum, A., and Abdullah, I. (2006). Effect of extrusion rate and fiber loading on mechanical properties of Twaron fiber-thermoplastic natural rubber (TPNR) composites. J. Reinf. Plast. Compos. 25: 957–965, https://doi.org/10.1177/0731684406065082.Search in Google Scholar

Ahmad, M.N., Ishak, M.R., Taha, M.M., Mustapha, F., and Leman, Z. (2021). Rheological and morphological properties of oil palm fiber-reinforced thermoplastic composites for fused deposition modeling (Fdm). Polymers 13: 3739, https://doi.org/10.3390/polym13213739.Search in Google Scholar PubMed PubMed Central

Appadurai, M., Fantin Irudaya Raj, E., and LurthuPushparaj, T. (2022). Sisal fiber-reinforced polymer composite-based small horizontal axis wind turbine suited for urban applications–a numerical study. Emergent Mater. 5: 565–578, https://doi.org/10.1007/s42247-022-00375-x.Search in Google Scholar

Ashok Kumar, M., Ramachandra Reddy, G., Raghavendra Rao, H., Hemachandra Reddy, K., and Nanjunda Reddy, B.H. (2012). Assessment of glass/drumstick fruit fiber (Moringa oleifera) reinforced epoxy hybrid composites. Int. J. Polym. Mater. 61: 759–767, https://doi.org/10.1080/00914037.2011.610046.Search in Google Scholar

Beakou, A., Ntenga, R., Lepetit, J., Ateba, J.A., and Ayina, L.O. (2008). Physico-chemical and microstructural characterization of “Rhectophyllum camerunense” plant fiber. Compos. A 39: 67–74, https://doi.org/10.1016/j.compositesa.2007.09.002.Search in Google Scholar

Behera, S., Gautam, R.K., Mohan, S., and Chattopadhyay, A. (2021). Hemp fiber surface modification: its effect on mechanical and tribological properties of hemp fiber reinforced epoxy composites. Polym. Compos. 42: 5223–5236, https://doi.org/10.1002/pc.26217.Search in Google Scholar

Blais, P. and Toubal, L. (2021). Fatigue of short-natural-fiber-reinforced high-density polyethylene: stochastic modeling of single-gear-tooth bending. Fatig. Fract. Eng. Mater. Struct. 44: 1241–1256, https://doi.org/10.1111/ffe.13426.Search in Google Scholar

Chand, N. and Joshi, R. (2010). Analysis of mechanical, thermal, and dynamic mechanical behaviors of different polymer-coated sisal fibers. J. Nat. Fibres 7: 100–110, https://doi.org/10.1080/15440478.2010.481117.Search in Google Scholar

Chen, X., Gu, L., Dang, C., and Cao, X. (2022). A lightweight and high-strength epoxy composites based on graphene oxide modified kapok fibers. Compos. Commun. 31: 101111, https://doi.org/10.1016/j.coco.2022.101111.Search in Google Scholar

Costa, C.S.M.F., Fonseca, A.C., Serra, A.C., and Coelho, J.F.J. (2016). Dynamic mechanical thermal analysis of polymer composites reinforced with natural fibers. Polym. Rev. 56: 362–383, https://doi.org/10.1080/15583724.2015.1108334.Search in Google Scholar

Darwin, S., Rani, E.F.I., Raj, E.F.I., Appadurai, M., and Balaji, M. (2022). Performance analysis of carbon nanotube transistors-A review. In: 2022 6th international conference on trends in electronics and informatics (ICOEI), IEEE, pp. 25–31.10.1109/ICOEI53556.2022.9776858Search in Google Scholar

Dauer, M., Wolfbauer, A., Seidlhofer, T., and Hirn, U. (2021). Shear modulus of single wood pulp fibers from torsion tests. Cellulose 28: 8043–8054, https://doi.org/10.1007/s10570-021-04027-x.Search in Google Scholar

Davies, P., Morvan, C., Sire, O., and Baley, C. (2007). Structure and properties of fibres from sea-grass (Zostera marina). J. Mater. Sci. 42: 4850–4857, https://doi.org/10.1007/s10853-006-0546-1.Search in Google Scholar

De Azevedo, A.R., Cruz, A.S., Marvila, M.T., de Oliveira, L.B., Monteiro, S.N., Vieira, C.M.F., Fediuk, R., Timokhin, R., Vatin, N., and Daironas, M. (2021). Natural fibers as an alternative to synthetic fibers in reinforcement of geopolymer matrices: a comparative review. Polymers 13: 2493, https://doi.org/10.3390/polym13152493.Search in Google Scholar PubMed PubMed Central

Delhom, C.D., Wanjura, J.D., Pelletier, M.G., Holt, G.A., and Hequet, E.F. (2023). Investigation into a practical approach and application of cotton fiber elongation. J. Cotton Res. 6: 1–12, https://doi.org/10.1186/s42397-023-00139-w.Search in Google Scholar

Dugvekar, M. and Dixit, S. (2023). Thermal, structural, and morphological examination of mercerized coir fiber–reinforced composites. Proc. Inst. Mech. Eng., Part E 237: 982–988, https://doi.org/10.1177/09544089221150677.Search in Google Scholar

El-Sagheer, I., Abd-Elhady, A.A., Sallam, H.E.D.M., and Naga, S.A. (2021). An assessment of ASTM E1922 for measuring the translaminar fracture toughness of laminated polymer matrix composite materials. Polymers 13: 3129, https://doi.org/10.3390/polym13183129.Search in Google Scholar PubMed PubMed Central

Fantin Irudaya Raj, E. and Balaji, M. (2021). Analysis and classification of faults in switched reluctance motors using deep learning neural networks. Arab. J. Sci. Eng. 46: 1313–1332, https://doi.org/10.1007/s13369-020-05051-y.Search in Google Scholar

Felix Sahayaraj, A., Jenish, I., Tamilselvan, M., Muthukrishnan, M., and Kumar, B.A. (2022). Mechanical and morphological characterization of sisal/kenaf/pineapple mat reinforced hybrid composites. Int. Polym. Process. 37: 581–588, https://doi.org/10.1515/ipp-2022-4238.Search in Google Scholar

Franco-Urquiza, E.A., Saleme-Osornio, R.S., and Ramírez-Aguilar, R. (2021). Mechanical properties of hybrid carbonized plant fibers reinforced bio-based epoxy laminates. Polymers 13: 3435, https://doi.org/10.3390/polym13193435.Search in Google Scholar PubMed PubMed Central

Gandhi, V.S., Jenish, I., Indran, S., and Rajan, D.Y. (2022). Mechanical and thermal analysis of Cissus quadrangularis stem fiber/epoxy composite with micro-red mud filler composite for structural application. Trans. Indian Inst. Met. 75: 737–747, https://doi.org/10.1007/s12666-021-02478-1.Search in Google Scholar

Gnanasekar, A.K., Deivakani, M., Bathala, N., Raj, E.F.I., and Ramakrishna, V. (2021). Novel low-noise CMOS bioamplifier for the characterization of neurodegenerative diseases. In: GeNeDis 2020: genetics and neurodegenerative diseases. Springer International Publishing, New York, pp. 221–226.10.1007/978-3-030-78787-5_27Search in Google Scholar PubMed

Goud, G. and Rao, R.N. (2012). Mechanical and electrical performance of Roystonea regia/glass fibre reinforced epoxy hybrid composites. Bull. Mater. Sci. 35: 595–599, https://doi.org/10.1007/s12034-012-0324-4.Search in Google Scholar

Goudarzi, R., Motlagh, G.H., Elhamnia, M., and Motahari, S. (2016). Graphite nanosheet as low shrinkage additive, curing accelerator, and conducting filler for unsaturated polyester resin. Polym. Plast. Technol. Eng. Polym. 55: 1231–1239, https://doi.org/10.1080/03602559.2015.1132468.Search in Google Scholar

Hargitai, H., Rácz, I., and Anandjiwala, R.D. (2008). Development of hemp fiber reinforced polypropylene composites. J. Thermoplast. Compos. Mater. 21: 165–174, https://doi.org/10.1177/0892705707083949.Search in Google Scholar

Hariprasad, P., Kannan, M., Ramesh, C., Felix Sahayaraj, A., Jenish, I., Hussain, F., Khedher, N.B., Boudjemline, A., and Suresh, V. (2022). Mechanical and morphological studies of Sansevieria trifasciata fiber-reinforced polyester composites with the addition of SiO2 and B4C. Adv. Mater. Sci. 2022, https://doi.org/10.1155/2022/1634670.Search in Google Scholar

Hashimoto, M., Okabe, T., Sasayama, T., Matsutani, H., and Nishikawa, M. (2012). Prediction of tensile strength of discontinuous carbon fiber/polypropylene composite with fiber orientation distribution. Compos. A 43: 1791–1799, https://doi.org/10.1016/j.compositesa.2012.05.006.Search in Google Scholar

Hegde, V.N. and Lumbini, J. (2023). Analysis of structural and elastic properties of Kapok fibre and hybrid cottons for textile applications. Adv. Mater. Process. 1–19, https://doi.org/10.1080/2374068x.2023.2168305.Search in Google Scholar

Herrera-Franco, P. and Valadez-Gonzalez, A. (2005). A study of the mechanical properties of short natural-fiber reinforced composites. Compos. B 36: 597–608, https://doi.org/10.1016/j.compositesb.2005.04.001.Search in Google Scholar

Holbery, J. and Houston, D. (2006). Natural-fiber-reinforced polymer composites in automotive applications. Jom 58: 80–86, https://doi.org/10.1007/s11837-006-0234-2.Search in Google Scholar

Hyness, N.R.J., Vignesh, N.J., Senthamaraikannan, P., Saravanakumar, S.S., and Sanjay, M.R. (2018). Characterization of new natural cellulosic fiber from heteropogon contortus plant. J. Nat. Fibres 15: 146–153, https://doi.org/10.1080/15440478.2017.1321516.Search in Google Scholar

Indran, S. and Raj, R.E. (2015). Characterization of new natural cellulosic fiber from Cissus quadrangularis stem. Carbohydr. Polym. 117: 392–399, https://doi.org/10.1016/j.carbpol.2014.09.072.Search in Google Scholar PubMed

Jagadeesh, P., Puttegowda, M., Girijappa, Y.G.T., Rangappa, S.M., and Siengchin, S. (2022). Carbon fiber reinforced areca/sisal hybrid composites for railway interior applications: mechanical and morphological properties. Polym. Compos. 43: 160–172, https://doi.org/10.1002/pc.26364.Search in Google Scholar

Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S., and Siengchin, S. (2021). A review on extraction, chemical treatment, characterization of natural fibers and its composites for potential applications. Polym. Compos. 42: 6239–6264, https://doi.org/10.1002/pc.26312.Search in Google Scholar

Jariwala, H. and Jain, P. (2019). A review on mechanical behavior of natural fiber reinforced polymer composites and its applications. J. Reinf. Plast. Compos. 38: 441–453, https://doi.org/10.1177/0731684419828524.Search in Google Scholar

Jayabal, S., Velumani, S., Navaneethakrishnan, P., and Palanikumar, K. (2013). Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite. Fibres Polym. 14: 1505–1514, https://doi.org/10.1007/s12221-013-1505-5.Search in Google Scholar

Jenish, I., Felix Sahayaraj, A., Appadurai, M., Fantin Irudaya Raj, E., Suresh, P., Raja, T., Salmen, S.H., Alfarraj, S., and Manikandan, V. (2021). Fabrication and experimental analysis of treated snake grass fiber reinforced with polyester composite. Adv. Mater. Sci. Eng. 2021: 1–13, https://doi.org/10.1155/2021/6078155.Search in Google Scholar

Jenish, I., Sahayaraj, A.F., Appadurai, M., Irudaya Raj, E.F., and Suresh, P. (2022a). Sea sand abrasive wear of red mud micro particle reinforced cissus quadrangularis stem fiber/epoxy composite. J. Nat. Fibres. 9: 13216–13231, https://doi.org/10.1080/15440478.2022.2087131.Search in Google Scholar

Jenish, I., Sahayaraj, A.F., Suresh, V., Mani Raj, J., Appadurai, M., Irudaya Raj, E.F., Nasif, O., Alfarraj, S., and Kumaravel, A.K. (2022b). Analysis of the hybrid of mudar/snake grass fiber-reinforced epoxy with nano-silica filler composite for structural application. Adv. Mater. Sci. Eng.: 1–10, https://doi.org/10.1155/2022/7805146.Search in Google Scholar

Kalita, K., Chaudhari, R., and Ramachandran, M. (2015). Mechanical characterization and finite element investigation on properties of PLA-jute composite. Int. J. Comput. Appl. Technol. 123: 17–21, https://doi.org/10.5120/ijca2015905537.Search in Google Scholar

Karimah, A., Ridho, M.R., Munawar, S.S., Adi, D.S., Damayanti, R., Subiyanto, B., Fatriasari, W., and Fudholi, A. (2021). A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations. J. Mater. Res. Technol. 13: 2442–2458, https://doi.org/10.1016/j.jmrt.2021.06.014.Search in Google Scholar

Kathirselvam, M., Kumaravel, A., Arthanarieswaran, V.P., and Saravanakumar, S.S. (2019a). Isolation and characterization of cellulose fibers from Thespesia populnea barks: a study on physicochemical and structural properties. Int. J. Biol. Macromol. 129: 396–406, https://doi.org/10.1016/j.ijbiomac.2019.02.044.Search in Google Scholar PubMed

Kathirselvam, M., Kumaravel, A., Arthanarieswaran, V.P., and Saravanakumar, S.S. (2019b). Characterization of cellulose fibers in Thespesia populnea barks: influence of alkali treatment. Carbohydr. Polym. 217: 178–189, https://doi.org/10.1016/j.carbpol.2019.04.063.Search in Google Scholar PubMed

Kicińska-Jakubowska, A., Bogacz, E., and Zimniewska, M. (2012). Review of natural fibers. Part I–vegetable fibers. J. Nat. Fibres. 9: 150–167, https://doi.org/10.1080/15440478.2012.703370.Search in Google Scholar

Kiziltas, E.E., Yang, H.S., Kiziltas, A., Boran, S., Ozen, E., and Gardner, D.J. (2016). Thermal analysis of polyamide 6 composites filled by natural fiber blend. BioResources 11: 4758–4769.10.15376/biores.11.2.4758-4769Search in Google Scholar

Kumar, R.P., Muthukrishnan, M., and Sahayaraj, A.F. (2022). Experimental investigation on jute/snake grass/kenaf fiber reinforced novel hybrid composites with annona reticulata seed filler addition. Mater. Res. Express 9: 095304, https://doi.org/10.1088/2053-1591/ac92ca.Search in Google Scholar

Kumar, S., Zindani, D., and Bhowmik, S. (2020). Investigation of mechanical and viscoelastic properties of flax-and ramie-reinforced green composites for orthopedic implants. J. Mater. Eng. Perform. 29: 3161–3171, https://doi.org/10.1007/s11665-020-04845-3.Search in Google Scholar

Leong, Y.W., Abu Bakar, M.B., Ishak, Z.M., Ariffin, A., and Pukanszky, B. (2004a). Comparison of the mechanical properties and interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites. J. Appl. Polym. Sci. 91: 3315–3326, https://doi.org/10.1002/app.13542.Search in Google Scholar

Leong, Y.W., Ishak, Z.M., and Ariffin, A. (2004b). Mechanical and thermal properties of talc and calcium carbonate filled polypropylene hybrid composites. J. Appl. Polym. Sci. 91: 3327–3336, https://doi.org/10.1002/app.13543.Search in Google Scholar

Liu, X., Xiao, X., Zhang, T., Li, Y., Peng, H., Dong, Y., Wang, K., and Li, J. (2022). Construction of thorough cross-linked networks in soybean meal adhesive system by biomimetic boronic acid-anchored cellulose nanofibril for multifunctionality of high-performance, mildew resistance, anti-bacterial, and flame resistance. Ind. Crops Prod. 180: 114791, https://doi.org/10.1016/j.indcrop.2022.114791.Search in Google Scholar

Manickam, T., Iyyadurai, J., Jaganathan, M., Babuchellam, A., Mayakrishnan, M., and Arockiasamy, F.S. (2023). Effect of stacking sequence on mechanical, water absorption, and biodegradable properties of novel hybrid composites for structural applications. Int. Polym. Process. 38: 88–96, https://doi.org/10.1515/ipp-2022-4274.Search in Google Scholar

Manimaran, P., Pillai, G.P., Vignesh, V., and Prithiviraj, M. (2020). Characterization of natural cellulosic fibers from Nendran Banana Peduncle plants. Int. J. Biol. Macromol. 162: 1807–1815, https://doi.org/10.1016/j.ijbiomac.2020.08.111.Search in Google Scholar PubMed

Methacanon, P., Weerawatsophon, U., Sumransin, N., Prahsarn, C., and Bergado, D.T. (2010). Properties and potential application of the selected natural fibers as limited life geotextiles. Carbohydr. Polym. 82: 1090–1096, https://doi.org/10.1016/j.carbpol.2010.06.036.Search in Google Scholar

Mohan Kumar, A., Rajasekar, R., Manoj Kumar, P., Parameshwaran, R., Karthick, A., Mohanavel, V., Sakthi, T., and Muhibbullah, M. (2021). Investigation of drilling process parameters of palmyra based composite. Adv. Mater. Sci. Eng. 2021: 1–9, https://doi.org/10.1155/2021/4222344.Search in Google Scholar

Morgado, D.L. and Frollini, E. (2011). Thermal decomposition of mercerized linter cellulose and its acetates obtained from a homogeneous reaction. Polímeros 21: 111–117, https://doi.org/10.1590/s0104-14282011005000025.Search in Google Scholar

Moshi, A., Madasamy, S., Bharathi, S.R., Periyanayaganathan, P., and Prabaharan, A. (2019). Investigation on the mechanical properties of sisal–banana hybridized natural fiber composites with distinct weight fractions. AIP Conf. Proc. 2128: 020–029.10.1063/1.5117941Search in Google Scholar

Muthu Chozha Rajan, B., Indran, S., Divya, D., Narayanasamy, P., Khan, A., Asiri, A.M., and Nagarajan, S. (2022). Mechanical and thermal properties of chloris barbata flower fiber/epoxy composites: effect of alkali treatment and fiber weight fraction. J. Nat. Fibers 19: 3453–3466, https://doi.org/10.1080/15440478.2020.1848703.Search in Google Scholar

Nayak, S.Y., Sultan, M.T.H., Shenoy, S.B., Kini, C.R., Samant, R., Shah, A.U.M., and Amuthakkannan, P. (2022). Potential of natural fibers in composites for ballistic applications–a review. J. Nat. Fibers 19: 1648–1658, https://doi.org/10.1080/15440478.2020.1787919.Search in Google Scholar

Oliveira, L.Á., Santos, J.C., Panzera, T.H., Freire, R.T., Vieira, L.M., and Scarpa, F. (2018). Evaluation of hybrid-short-coir-fibre-reinforced composites via full factorial design. Compos. Struct. 202: 313–323, https://doi.org/10.1016/j.compstruct.2018.01.088.Search in Google Scholar

Pawar, K.S., Bagha, A.K., Bahl, S., and Agarwal, M.K. (2022). Experimental investigation for the dynamic characteristics of short natural fiber reinforced composite materials. Indian J. Eng. Mater. Sci. 29: 366–377.10.56042/ijems.v29i3.65767Search in Google Scholar

Peivandi, S., Dehghanzadeh, H., and Baghizadeh, A. (2022). Biosynthesis of gold nanoparticles using sansevieria plant extract and its biomedical application. Inorg. Nano-Metal Chem. 53: 482–489, https://doi.org/10.1080/24701556.2022.2078355.Search in Google Scholar

Pickering, K.L., Efendy, M.A., and Le, T.M. (2016). A review of recent developments in natural fibre composites and their mechanical performance. Compos. A. 83: 98–112, https://doi.org/10.1016/j.compositesa.2015.08.038.Search in Google Scholar

Ponnu Krishnan, P. and Selwin Rajadurai, J. (2017). Microscopical, physico-chemical, mineralogical, and mechanical characterization of Sansevieria zeylanica fibers as potential reinforcement of composite structures. J. Compos. Mater. 51: 811–829, https://doi.org/10.1177/0021998316653461.Search in Google Scholar

Praveena, B.A., Santhosh, N., Archana, D.P., Buradi, A., Raj, E., Chanakyan, C., Elfasakhany, A., and Basheer, D. (2022). Influence of nanoclay filler material on the tensile, flexural, impact, and morphological characteristics of jute/E-glass fiber-reinforced polyester-based hybrid composites: experimental, modeling, and optimization study. J. Nanomater. 2022, https://doi.org/10.1155/2022/1653449.Search in Google Scholar

Premkumar, R., Sathish Kumar, K., Maniraj, J., Jenish, I., Hussain, F., Khedher, N.B., Aich, W., and Suresh, V. (2022). Experimental studies on mechanical and thermal properties of polyester hybrid composites reinforced with Sansevieria Trifasciata fibers. Adv. Mater. Sci. 2022, https://doi.org/10.1155/2022/8604234.Search in Google Scholar

Pushparaj, T.L., Raj, E.F.I., Rani, E.F.I., Darwin, S., and Appadurai, M. (2022). Employing novel Si-over-Si technology to optimize PV effect in solar array. Silicon 14: 12823–12835, https://doi.org/10.1007/s12633-022-01976-1.Search in Google Scholar

Raj, E.F.I., Appadurai, M., Rani, E.F.I., and Jenish, I. (2022). Finite-element design and analysis of switched reluctance motor for automobile applications. Multiscale Multidiscip. Model. Exp. and Des. 5: 269–277, https://doi.org/10.1007/s41939-022-00119-8.Search in Google Scholar

Rajeshkumar, G., Seshadri, S.A., Ramakrishnan, S., Sanjay, M.R., Siengchin, S., and Nagaraja, K.C. (2021). A comprehensive review on natural fiber/nano-clay reinforced hybrid polymeric composites: materials and technologies. Polym. Compos. 42: 3687–3701, https://doi.org/10.1002/pc.26110.Search in Google Scholar

Ramesh, M., Atreya, T.S.A., Aswin, U.S., Eashwar, H., and Deepa, C. (2014). Processing and mechanical property evaluation of banana fiber reinforced polymer composites. Procedia Eng. 97: 563–572, https://doi.org/10.1016/j.proeng.2014.12.284.Search in Google Scholar

Ramesh, M., Rajeshkumar, L., Sasikala, G., Balaji, D., Saravanakumar, A., Bhuvaneswari, V., and Bhoopathi, R. (2022). A critical review on wood-based polymer composites: processing, properties, and prospects. Polymers 14: 589, https://doi.org/10.3390/polym14030589.Search in Google Scholar PubMed PubMed Central

Rao, P.D. and Prasad, K.E. (2017). Tensile studies on random oriented human hair fiber reinforced polyester composites. J. Mech. Eng. 47: 37–44, https://doi.org/10.3329/jme.v47i1.35357.Search in Google Scholar

Rao, R.U. (2017). Evaluation of the mechanical properties on sisal-coir hybrid natural fiber composites. Evaluation 13: 43–49.Search in Google Scholar

Restaino, O.F., Giosafatto, C.V.L., Mirpoor, S.F., Cammarota, M., Hejazi, S., Mariniello, L., Schiraldi, C., and Porta, R. (2023). Sustainable exploitation of posidonia oceanica sea balls (egagropili): a review. Int. J. Mol. Sci. 24: 7301, https://doi.org/10.3390/ijms24087301.Search in Google Scholar PubMed PubMed Central

Sanchez-Salvador, J.L., Balea, A., Monte, M.C., Negro, C., and Blanco, A. (2021). Chitosan grafted/cross-linked with biodegradable polymers: a review. Int. J. Biol. Macromol. 178: 325–343, https://doi.org/10.1016/j.ijbiomac.2021.02.200.Search in Google Scholar PubMed

Sathishkumar, T.P., Navaneethakrishnan, P., Shankar, S., and Rajasekar, R. (2013). Characterization of new cellulose sansevieria ehrenbergii fibers for polymer composites. Compos. Interfaces 20: 575–593, https://doi.org/10.1080/15685543.2013.816652.Search in Google Scholar

Sathishkumar, T.P., Satheeshkumar, S., and Naveen, J. (2014). Glass fiber-reinforced polymer composites–a review. J. Reinf. Plast. Compos. 33: 1258–1275, https://doi.org/10.1177/0731684414530790.Search in Google Scholar

Sivaranjana, P. and Arumugaprabu, V.J.S.A.S. (2021). A brief review on mechanical and thermal properties of banana fiber based hybrid composites. SN Appl. Sci. 3: 1–8, https://doi.org/10.1007/s42452-021-04216-0.Search in Google Scholar

Song, H., Liu, J., He, K., and Ahmad, W. (2021). A comprehensive overview of jute fiber reinforced cementitious composites. Case Stud. Constr. Mater. 15: e00724, https://doi.org/10.1016/j.cscm.2021.e00724.Search in Google Scholar

Sreenivasan, V.S., Ravindran, D., Manikandan, V., and Narayanasamy, R. (2011a). Mechanical properties of randomly oriented short Sansevieria cylindrica fibre/polyester composites. Mater. Des. 32: 2444–2455, https://doi.org/10.1016/j.matdes.2010.11.042.Search in Google Scholar

Sreenivasan, V.S., Rajini, N., Alavudeen, A., and Arumugaprabu, V. (2015). Dynamic mechanical and thermo-gravimetric analysis of Sansevieria cylindrica/polyester composite: effect of fiber length, fiber loading and chemical treatment. Compos. B 69: 76–86, https://doi.org/10.1016/j.compositesb.2014.09.025.Search in Google Scholar

Sreenivasan, V.S., Somasundaram, S., Ravindran, D., Manikandan, V., and Narayanasamy, R. (2011b). Microstructural, physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres–an exploratory investigation. Mater. Des. 32: 453–461, https://doi.org/10.1016/j.matdes.2010.06.004.Search in Google Scholar

Teixeira, L.A., Libera Junior, V.D., and da Luz, S.M. (2023). The effect of fiber orientation on creep behavior of sisal/epoxy composites. J. Braz. Soc. Mech. 45: 258, https://doi.org/10.1007/s40430-023-04182-1.Search in Google Scholar

Thandavamoorthy, R. and Palanivel, A. (2019). Testing and evaluation of tensile and impact strength of neem/banyan fiber-reinforced hybrid composite. J. Test. Eval. 48: 647–655, https://doi.org/10.1520/jte20180640.Search in Google Scholar

Velmurugan, R. and Manikandan, V. (2007). Mechanical properties of palmyra/glass fiber hybrid composites. Compos. A 38: 2216–2226, https://doi.org/10.1016/j.compositesa.2007.06.006.Search in Google Scholar

Wambua, P., Ivens, J., and Verpoest, I. (2003). Natural fibres: can they replace glass in fibre reinforced plastics? Compos. Sci. Technol. 63: 1259–1264, https://doi.org/10.1016/s0266-3538(03)00096-4.Search in Google Scholar

Wang, B., Wang, X., Xu, N., Shen, Y., Lu, F., Liu, Y., Huang, Y., and Hu, Z. (2021). Recycling of carbon fibers from unsaturated polyester composites via a hydrolysis-oxidation synergistic catalytic strategy. Compos. Sci. Technol. 203: 108589, https://doi.org/10.1016/j.compscitech.2020.108589.Search in Google Scholar

Wilson García, N.A., Almaral Sánchez, J.L., Vargas Ortiz, R.Á., Hurtado Macías, A., Flores Ramírez, N., Aguilar Palazuelos, E., Flores Valenzuela, J., Castro Beltrán, A., and Alvarado Beltrán, C.G. (2021). Physical and mechanical properties of unsaturated polyester resin matrix from recycled PET (based PG) with corn straw fiber. J. Appl. Polym. Sci. 138: 51305, https://doi.org/10.1002/app.51305.Search in Google Scholar

Yaghoobi, H. and Fereidoon, A. (2019). Thermal analysis, statistical predicting, and optimization of the flexural properties of natural fiber biocomposites using Box–Behnken experimental design. J. Test. Eval. 16: 987–1005, https://doi.org/10.1080/15440478.2018.1447416.Search in Google Scholar

Yıldız, A., Emanetoğlu, U., Yenigun, E.O., and Cebeci, H. (2022). Towards optimized carbon nanotubes (CNTs) reinforced polyetherimide (PEI) 3D printed structures: a comparative study on testing standards. Compos. Struct. 296: 115853, https://doi.org/10.1016/j.compstruct.2022.115853.Search in Google Scholar