Investigation of erosion wear performance and mechanism of mold materials

References

Bergstrom, J., Thuvander, F., Devos, P., and Boher, C. (2001). Wear of die materials in full scale plastic injection moulding of glass fibre reinforced polycarbonate. Wear 251: 1511–2521, https://doi.org/10.1016/S0043-1648(01)00787-6.Suche in Google Scholar

Biswas, S., Williams, K., and Jones, M. (2018). Development of a constitutive model for erosion based on dissipated particle energy to predict the wear rate of ductile metals. Wear 404–405: 166–175, https://doi.org/10.1016/j.wear.2018.02.021.Suche in Google Scholar

Bull, S.J., Davidson, R.I., Fisher, E.H., McCabe, A.R., and Jones, A.M. (2000). A simulation test for the selection of coatings and surface treatments for plastics injection moulding machines. Surf. Coat. Tech. 130: 257–265, https://doi.org/10.1016/S0257-8972(00)00697-6.Suche in Google Scholar

Chen, C.C., Li, Q.T., Zhang, L.J., and Ye, X.C. (2012). High temperature erosion-wear behavior and mechanism of 304 stainless steel, journal of materials protection. Mater. Protec. 07: 15–18, https://doi.org/10.16577/j.cnki.42-1215/tb.2012.07.012.Suche in Google Scholar

Chen, G., Chen, X.W., Chen, Z.F., and Qu, M. (2007). Simulations of A3 steel blunt projectiles impacting 45 steel plates. Explos. Shock Waves 27: 390–397.Suche in Google Scholar

Delli, E., Giliopoulos, D., Bikiaris, D.N., and Chrissafis, K. (2021). Fibre length and loading impact on the properties of glass fibre reinforced polypropylene random composites. Compos. Struct. 263: 113678, https://doi.org/10.1016/j.compstruct.2021.113678.Suche in Google Scholar

ElTobgy, M.S., Ng, E., Fisher, E.H., and Elbestawi, M.A. (2005). Finite element modeling of erosive wear, international journal of machine tools and manufacture. Int. J. Mach. Tools Manuf. 45: 1337–1346, https://doi.org/10.1016/j.ijmachtools.2005.01.007.Suche in Google Scholar

Jang, J., Jeon, S., Choi, J., Shim, W., Cho, J., Yoon, S., Choi, C., and Yu, W.R. (2021). Mechanical analysis of fiber-reinforced plastics using an elastoplastic-damage constitutive equation considering asymmetric material behavior. Compos. Struct. 272: 114268, https://doi.org/10.1016/j.compstruct.2021.114268.Suche in Google Scholar

Jansson, J., Gustafsson, T., Salomonsson, K., Olofsson, J., Johansson, J., Appelsved, P., and Palm, M. (2018). An anisotropic non-linear material model for glass fibre reinforced plastics. Compos. Struct. 195: 93–98, https://doi.org/10.1016/j.compstruct.2018.04.044.Suche in Google Scholar

Johnson, G.R. and Cook, W.H. (1985). Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng. Fract. Mech. 21: 31–48, https://doi.org/10.1016/0013-7944(85)90052-9.Suche in Google Scholar

Kitagawa, Y., Yoshimura, A., Arai, M., Goto, K., and Sugiura, N. (2022). Experimental and numerical evaluation of effects of kidney-shape carbon fiber on transverse cracking of carbon fiber reinforced plastics. Compos. Pt. A-Appl. Sci. Manuf. 152: 106690, https://doi.org/10.1016/j.compositesa.2021.106690.Suche in Google Scholar

Li, S. and Dong, X. (1987). The erosion wear and micro-dynamic wear of the material. China Machine Press, Bei Jing.Suche in Google Scholar

Martínez-Mateo, I., Carrión-Vilches, F.J., Sanes, J., and Bermúdez, M.D. (2011). Surface damage of mold steel and its influence on surface roughness of injection molded plastic parts. Wear 271: 2512–2516, https://doi.org/10.1016/j.wear.2010.11.054.Suche in Google Scholar

Rodríguez, J., Martinez, D., Perez, A., González, R., Rodríguez, E., and Valtierra, S. (2007). Erosion wear in heat treated tool steels used in core boxes at automotive foundries. Wear 263: 301–308, https://doi.org/10.1016/j.wear.2006.12.051.Suche in Google Scholar

Sheinbaum, M., Sheinbaum, L., Weizman, O., Dodiuk, H., and Kenig, S. (2019). Toughening and enhancing mechanical and thermal properties of adhesives and glass-fiber reinforced epoxy composites by brominated epoxy. Compos. Pt. B-Eng. 165: 604–612, https://doi.org/10.1016/j.compositesb.2019.02.020.Suche in Google Scholar

Silva, F., Martinho, R., Andrade, M., Baptista, A., and Alexandre, R. (2017). Improving the wear resistance of moulds for the injection of glass fibre–reinforced plastics using PVD coatings: a comparative study. Coatings 7: 28, https://doi.org/10.3390/coatings7020028.Suche in Google Scholar

Vite-Torres, M., Laguna-Camacho, J.R., Baldenebro-Castillo, R.E., Gallardo-Hernández, E.A., Vera-Cárdenas, E.E., and Vite-Torres, J. (2013). Study of solid particle erosion on AISI 420 stainless steel using angular silicon carbide and steel round grit particles. Wear 301: 383–389, https://doi.org/10.1016/j.wear.2013.01.071.Suche in Google Scholar

Witzgall, C., Giolda, J., and Wartzack, S. (2022). A novel approach to incorporating previous fatigue damage into a failure model for short-fibre reinforced plastics. Int. J. Impact Eng. 162: 104115, https://doi.org/10.1016/j.ijimpeng.2022.104155.Suche in Google Scholar

Yang, C., Wang, G.R., Zhao, G., Zhao, G., and Zhang, A. (2021). Lightweight and strong glass fiber reinforced polypropylene composite foams achieved by mold-opening microcellular injection molding. J. Mater. Res. Technol. 14: 2920–2931, https://doi.org/10.1016/j.jmrt.2021.08.052.Suche in Google Scholar

Zabala, B., Fernandez, X., Rodriguez, J.C., López-Ortega, A., Fuentes, E., Bayón, R., Igartua, A., and Girot, F. (2019). Mechanism-based wear models for plastic injection moulds. Wear 203105: 440–441, https://doi.org/10.1016/j.wear.2019.203105.Suche in Google Scholar

Zhang, X., Wang, P., Neo, H., Lim, G., Malcolm, A.A., Yang, E., and Yang, J. (2016). Design of glass fiber reinforced plastics modified with CNT and pre-stretching fabric for potential sports instruments. Mater. Des. 92: 621–631, https://doi.org/10.1016/j.matdes.2015.12.051.Suche in Google Scholar

Zheng, C., Liu, Y., Chen, C., Qin, J., Ji, R., and Cai, B. (2017). Numerical study of impact erosion of multiple solid particle. Appl. Surf. Sci. 423: 176–184, https://doi.org/10.1016/j.apsusc.2017.06.132.Suche in Google Scholar