Bifurcation Analysis of an Electro-Statically Actuated Nano-beam Based on the Nonlocal Theory considering Centrifugal Forces

References

[1] X.-M. Zhao, Y. Xia and G. M. Whitesides, Soft lithographic methods for nano-fabrication, J. Mater. Chem. 7 (1997), 1069–1074.10.1039/a700145bSearch in Google Scholar

[2] A. Afkhami, H. Ghaedi, T. Madrakian, M. Ahmadi and H. Mahmood-Kashani, Fabrication of a new electrochemical sensor based on a new nano-molecularly imprinted polymer for highly selective and sensitive determination of tramadol in human urine samples, Biosens. Bioelectron. 44 (2013), 34–40.10.1016/j.bios.2012.11.030Search in Google Scholar

[3] P. Kim and C. M. Lieber, Nanotube nanotweezers, Science. 286 (1999), 2148–2150.10.1126/science.286.5447.2148Search in Google Scholar

[4] L. Laurent, -J.-J. Yon, J.-S. Moulet, M. Roukes and L. Duraffourg, 12− μ m-pitch electromechanical resonator for thermal sensing, Phys. Rev. Appl. 9 (2018), 024016.10.1103/PhysRevApplied.9.024016Search in Google Scholar

[5] F. Vakili-Tahami, H. Mobki, A.-A. Keyvani-Janbahan and G. Rezazadeh, Pull-in phenomena and dynamic response of a capacitive nano-beam switch, Sens. Transducers. 110 (2009), 26.Search in Google Scholar

[6] T. Rueckes, K. Kim, E. Joselevich, G. Y. Tseng, C.-L. Cheung and C. M. Lieber, Carbon nanotube-based nonvolatile random access memory for molecular computing, Science. 289 (2000), 94–97.10.1126/science.289.5476.94Search in Google Scholar

[7] M. M. S. Fakhrabadi, A. Rastgoo and M. T. Ahmadian, Size-dependent instability of carbon nanotubes under electrostatic actuation using nonlocal elasticity, Int. J. Mech. Sci. 80 (2014), 144–152.10.1016/j.ijmecsci.2013.12.016Search in Google Scholar

[8] A. C. Eringen, Nonlocal polar elastic continua, Int. J. Eng. Sci. 10 (1972), 1–16.10.1016/0020-7225(72)90070-5Search in Google Scholar

[9] R. C. Cammarata, Surface and interface stress effects in thin films, Prog. Surf. Sci. 46 (1994), 1–38.10.1016/0079-6816(94)90005-1Search in Google Scholar

[10] H. Ma, X.-L. Gao and J. Reddy, A microstructure-dependent Timoshenko beam model based on a modified couple stress theory, J. Mech. Phys. Solids. 56 (2008), 3379–3391.10.1016/j.jmps.2008.09.007Search in Google Scholar

[11] M. H. Ghayesh, M. Amabili and H. Farokhi, Nonlinear forced vibrations of a microbeam based on the strain gradient elasticity theory, Int. J. Eng. Sci. 63 (2013), 52–60.10.1016/j.ijengsci.2012.12.001Search in Google Scholar

[12] A. C. Eringen, On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves, J. Appl. Phys. 54 (1983), 4703–4710.10.1063/1.332803Search in Google Scholar

[13] J. Reddy, Nonlocal theories for bending, buckling and vibration of beams, Int. J. Eng. Sci. 45 (2007), 288–307.10.1016/j.ijengsci.2007.04.004Search in Google Scholar

[14] C. Wang, Y. Zhang and X. He, Vibration of nonlocal Timoshenko beams, Nanotechnology. 18 (2007), 105401.10.1088/0957-4484/18/10/105401Search in Google Scholar

[15] K. Kiani and B. Mehri, Assessment of nanotube structures under a moving nanoparticle using nonlocal beam theories, J. Sound Vib. 329 (2010), 2241–2264.10.1016/j.jsv.2009.12.017Search in Google Scholar

[16] H. Heireche, A. Tounsi, A. Benzair, M. Maachou and E. A. Bedia, Sound wave propagation in single-walled carbon nanotubes using nonlocal elasticity, Physica E. 40 (2008), 2791–2799.10.1016/j.physe.2007.12.021Search in Google Scholar

[17] H. Heireche, A. Tounsi and A. Benzair, Scale effect on wave propagation of double-walled carbon nanotubes with initial axial loading, Nanotechnology. 19 (2008), 185703.10.1088/0957-4484/19/18/185703Search in Google Scholar PubMed

[18] A. Tounsi, H. Heireche, A. Benzair and I. Mechab, Comment on ‘Vibration analysis of fluid-conveying double-walled carbon nanotubes based on nonlocal elastic theory’, J. Phys.: Condens. Matter. 21 (2009), 448001.10.1088/0953-8984/21/44/448001Search in Google Scholar PubMed

[19] C. Li, C. W. Lim, J. Yu and Q. Zeng, Analytical solutions for vibration of simply supported nonlocal nanobeams with an axial force, Int. J. Struct. Stab. Dyn. 11 (2011), 257–271.10.1142/S0219455411004087Search in Google Scholar

[20] C. Li, C. W. Lim and J. Yu, Dynamics and stability of transverse vibrations of nonlocal nanobeams with a variable axial load, Smart Mater. Struct. 20 (2010), 015023.10.1088/0964-1726/20/1/015023Search in Google Scholar

[21] A. Shah-Mohammadi-Azar, H. Azimloo, G. Rezazadeh, R. Shabani and B. Tousi, On the modeling of a capacitive angular speed measurement sensor, Measurement. 46 (2013), 3976–3981.10.1016/j.measurement.2013.07.018Search in Google Scholar

[22] Y. Zhang and Y.-P. Zhao, Numerical and analytical study on the pull-in instability of micro-structure under electrostatic loading, Sens. Actuators A: Phys. 127 (2006), 366–380.10.1016/j.sna.2005.12.045Search in Google Scholar

[23] M. I. Younis and A. Nayfeh, A study of the nonlinear response of a resonant microbeam to an electric actuation, Nonlinear Dyn. 31 (2003), 91–117.10.1023/A:1022103118330Search in Google Scholar

[24] H. C. Nathanson, W. E. Newell, R. A. Wickstrom and J. R. Davis, The resonant gate transistor, IEEE Trans. Electron Devices. 14 (1967), 117–133.10.1109/T-ED.1967.15912Search in Google Scholar

[25] M. I. Younis, R. Miles and D. Jordy, Investigation of the response of microstructures under the combined effect of mechanical shock and electrostatic forces, J. Micromech. Microeng. 16 (2006), 2463.10.1088/0960-1317/16/11/030Search in Google Scholar

[26] G. Rezazadeh, M. Fathalilou and M. Sadeghi, Pull-in voltage of electrostatically-actuated microbeams in terms of lumped model pull-in voltage using novel design corrective coefficients, Sens. Imag.: Int. J. 12 (2011), 117–131.10.1007/s11220-011-0065-2Search in Google Scholar

[27] E. Buks and M. Roukes, Stiction, adhesion energy, and the Casimir effect in micromechanical systems, Phys. Rev. B. 63 (2001), 033402.10.1103/PhysRevB.63.033402Search in Google Scholar

[28] M. Dequesnes, S. Rotkin and N. Aluru, Calculation of pull-in voltages for carbon-nanotube-based nanoelectromechanical switches, Nanotechnology. 13 (2002), 120.10.1088/0957-4484/13/1/325Search in Google Scholar

[29] Y. T. Beni, A. Koochi and M. Abadyan, Theoretical study of the effect of Casimir force, elastic boundary conditions and size dependency on the pull-in instability of beam-type NEMS, Physica E. 43 (2011), 979–988.10.1016/j.physe.2010.11.033Search in Google Scholar

[30] J. Yang, X. Jia and S. Kitipornchai, Pull-in instability of nano-switches using nonlocal elasticity theory, J. Phys. D: Appl. Phys. 41 (2008), 035103.10.1088/0022-3727/41/3/035103Search in Google Scholar

[31] J. S. Peng, G. B. Luo, L. Yang and J. Yang, Pull-in instability behaviour of nanoscale actuators using nonlocal elasticity theory, in: Advanced Materials Research, Trans Tech Publ, pp. 2755–2758, 2012.10.4028/www.scientific.net/AMR.468-471.2755Search in Google Scholar

[32] Q. Xin and Z. Shi, Prediction and recovery of aircraft unstable nonlinear phenomena using bifurcation analysis and backstepping method, J. Comput. Nonlinear Dyn. 11 (2016), 061007.10.1115/1.4034049Search in Google Scholar

[33] X. Qi and S. Zhongke, Bifurcation analysis and stability design for aircraft longitudinal motion with high angle of attack, Chin. J. Aeronaut. 28 (2015), 250–259.10.1016/j.cja.2014.12.022Search in Google Scholar

[34] L. Wen-Hui and Z. Ya-Pu, Dynamic behaviour of nanoscale electrostatic actuators, Chin. Phys. Lett. 20 (2003), 2070.10.1088/0256-307X/20/11/049Search in Google Scholar

[35] W.-H. Lin and Y.-P. Zhao, Stability and bifurcation behaviour of electrostatic torsional NEMS varactor influenced by dispersion forces, J. Phys. D: Appl. Phys. 40 (2007), 1649.10.1088/0022-3727/40/6/011Search in Google Scholar

[36] P. C. Chao, C. Chiu and T.-H. Liu, DC dynamic pull-in predictions for a generalized clamped-clamped micro-beam based on a continuous model and bifurcation analysis, J. Micromech. Microeng. 18 (2008), 115008.10.1088/0960-1317/18/11/115008Search in Google Scholar

[37] J.-G. Guo and Y.-P. Zhao, Dynamic stability of electrostatic torsional actuators with van der Waals effect, Int. J. Solids Struct. 43 (2006), 675–685.10.1016/j.ijsolstr.2005.03.073Search in Google Scholar

[38] H. Mobki, G. Rezazadeh, M. Sadeghi, F. Vakili-Tahami and -M.-M. Seyyed-Fakhrabadi, A comprehensive study of stability in an electro-statically actuated micro-beam, Int. J. Non Linear Mech. 48 (2013), 78–85.10.1016/j.ijnonlinmec.2012.08.002Search in Google Scholar

[39] N. Taghavi and H. Nahvi, Stability analysis of arch shape carbon nanotubes modeled by nonlocal elasticity theory, J. Comput. Theor. Nanosci. 10 (2013), 719–727.10.1166/jctn.2013.2761Search in Google Scholar

[40] S. Valilou, G. Rezazadeh, R. Shabani and M. Fathalilou, Bifurcation analysis of a capacitive micro-resonator considering non-local elasticity theory, Int. J. Nonlinear Sci. Numer. Simul. 15 (2014), 241–249.10.1515/ijnsns-2013-0111Search in Google Scholar

[41] Y. Zhang and Y.-P. Zhao, Measuring the nonlocal effects of a micro/nanobeam by the shifts of resonant frequencies, Int. J. Solids Struct. 102 (2016), 259–266.10.1016/j.ijsolstr.2016.09.034Search in Google Scholar

[42] H. Azimloo, G. Rezazadeh and R. Shabani, Development of a capacitive angular velocity sensor for the alarm and trip applications, Measurement. 63 (2015), 282–286.10.1016/j.measurement.2014.12.026Search in Google Scholar

[43] H. Azimloo, G. Rezazadeh, R. Shabani and M. Sheikhlou, Bifurcation analysis of an electro-statically actuated micro-beam in the presence of centrifugal forces, Int. J. Non Linear Mech. 67 (2014), 7–15.10.1016/j.ijnonlinmec.2014.07.001Search in Google Scholar

[44] J.-G. Guo and Y.-P. Zhao, Influence of van der Waals and Casimir forces on electrostatic torsional actuators, J. Microelectromech. Syst. 13 (2004), 1027–1035.10.1109/JMEMS.2004.838390Search in Google Scholar

[45] S. S. Rao, Vibration of continuous systems, John Wiley & Sons, Hoboken, New Jersey, 2007.Search in Google Scholar

[46] H. Sadeghian and G. Rezazadeh, Comparison of generalized differential quadrature and Galerkin methods for the analysis of micro-electro-mechanical coupled systems, Commun. Nonlinear Sci. Numer. Simul. 14 (2009), 2807–2816.10.1016/j.cnsns.2008.07.016Search in Google Scholar

[47] G. Rezazadeh, A. Tahmasebi and M. Zubstov, Application of piezoelectric layers in electrostatic MEM actuators: controlling of pull-in voltage, Microsyst. Technol. 12 (2006), 1163–1170.10.1007/s00542-006-0245-5Search in Google Scholar

[48] W.-H. Lin and Y.-P. Zhao, Nonlinear behavior for nanoscale electrostatic actuators with Casimir force, Chaos, Solitons Fractals. 23 (2005), 1777–1785.10.1016/S0960-0779(04)00442-4Search in Google Scholar

[49] M. I. Younis, E. M. Abdel-Rahman and A. Nayfeh, A reduced-order model for electrically actuated microbeam-based MEMS, J. Microelectromech. Syst. 12 (2003), 672–680.10.1109/JMEMS.2003.818069Search in Google Scholar

[50] M. Fathalilou, M. Sadeghi and G. Rezazadeh, Gap dependent bifurcation behavior of a nano-beam subjected to a nonlinear electrostatic pressure, Lat. Am. J. Solids Struct. 11 (2014), 2426–2443.10.1590/S1679-78252014001300006Search in Google Scholar

[51] A. H. Nayfeh, M. I. Younis and E. M. Abdel-Rahman, Dynamic pull-in phenomenon in MEMS resonators, Nonlinear Dyn. 48 (2007), 153–163.10.1007/s11071-006-9079-zSearch in Google Scholar