Deutsche Gesellschaft für Materialkunde / German Materials Science Society

Articles in the same Issue

1. Contents
2. Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel
3. The significance of microstructural evolution on governing impact toughness of Fe-0.2C-6Mn-3Al medium-Mn TRIP steel studied by a novel heat treatment
4. Microstructure, phase relationships and microhardness of Fe₆₀Al_40–nHf_n alloys (n = 1, 3, and 5 at.%)
5. Effect of ultrasonic melt treatment on the microstructure and tensile properties of Al-25% Si alloy assisted by phosphorus addition
6. Effect of pulsed magneto oscillation and phosphorus on microstructure and tensile properties of as-cast Al-25% Si alloy
7. Formation of boride layers on a commercially pure Ti surface produced via powder metallurgy
8. Microstructure and polarization behavior of Ni/WC+GO (graphene oxide) composite cladding fusion coating
9. Effect of coating parameters on microstructure, corrosion behavior, hardness and formability of hot-dip Galfan and galvanized coatings
10. Optimization and kinetic studies on cationic dye adsorption using textile yarn waste/Multiwall carbon nanotube nanofibrous composites
11. Erratum
12. Glass formation, magnetic properties, and electrical resistivity of the multi-component FeNbBCuNiCo amorphous alloys
13. Notifications
14. Deutsche Gesellschaft für Materialkunde / German Materials Science Society