News

Articles in the same Issue

1. Frontmatter
2. Editorial
3. Diffusion of ⁶⁵Zn in the Mg₁₇Al₁₂ intermetallic compound and in the Mg-33.4 wt.% Al eutectic
4. Thermodynamic modeling of the sodium alanates and the Na–Al–H system
5. Thermodynamic assessment of the systems La₂O₃–Al₂O₃ and La₂O₃–Y₂O₃
6. Re-evaluation of phase equilibria in the Al–Mo system
7. EBSD and EDX analysis at the cladding–substrate interface of a laser clad railway wheel
8. Thermodynamic properties of liquid silver–indium–antimony alloys determined from e.m.f. measurements
9. Density and excess volumes of liquid copper, cobalt, iron and their binary and ternary alloys
10. Thermodynamic investigation of Co–Cr alloys, III: Thermo-analytical measurements using DSC and DTA techniques
11. Effect of a low frequency electromagnetic field on the direct-chill (DC) casting of AZ80 magnesium alloy ingots
12. Microstructure of the “white layer” formed on nitrided Fe-7 wt.% Cr alloys
13. The effect of ageing on tensile behaviour, mode I and mixed mode I/III fracture toughness of 7010 aluminium alloy
14. Plane bending fatigue behavior of interstitial-free steel at room temperature
15. Fracture behaviour of ultrafine-grained materials under static and cyclic loading
16. Influence of process parameters on particle characteristics using a combined pressure-swirl-gas atomizer
17. Processing and mechanical behaviour of a dual scale particle strengthened copper composite
18. Electrochemical characterisation of magnesium and wrought magnesium alloys
19. Progress in understanding the metallurgy of 18% nickel maraging steels
20. Quality Management Basics on a High Level
21. Personal
22. News
23. Frontmatter
24. Editorial
25. Editorial
26. Basic
27. Diffusion of ⁶⁵Zn in the Mg₁₇Al₁₂ intermetallic compound and in the Mg-33.4 wt.% Al eutectic
28. Thermodynamic modeling of the sodium alanates and the Na–Al–H system
29. Thermodynamic assessment of the systems La₂O₃–Al₂O₃ and La₂O₃–Y₂O₃
30. Re-evaluation of phase equilibria in the Al–Mo system
31. EBSD and EDX analysis at the cladding–substrate interface of a laser clad railway wheel
32. Thermodynamic properties of liquid silver–indium–antimony alloys determined from e.m.f. measurements
33. Density and excess volumes of liquid copper, cobalt, iron and their binary and ternary alloys
34. Thermodynamic investigation of Co–Cr alloys, III: Thermo-analytical measurements using DSC and DTA techniques
35. Applied
36. Effect of a low frequency electromagnetic field on the direct-chill (DC) casting of AZ80 magnesium alloy ingots
37. Microstructure of the “white layer” formed on nitrided Fe-7 wt.% Cr alloys
38. The effect of ageing on tensile behaviour, mode I and mixed mode I/III fracture toughness of 7010 aluminium alloy
39. Plane bending fatigue behavior of interstitial-free steel at room temperature
40. Fracture behaviour of ultrafine-grained materials under static and cyclic loading
41. Influence of process parameters on particle characteristics using a combined pressure-swirl-gas atomizer
42. Processing and mechanical behaviour of a dual scale particle strengthened copper composite
43. Electrochemical characterisation of magnesium and wrought magnesium alloys
44. History
45. Progress in understanding the metallurgy of 18% nickel maraging steels
46. Notifications
47. Quality Management Basics on a High Level
48. Personal
49. News