Abstract
A model based on a cluster of four atoms has been used to obtain higher-order conditional probabilities that describe the atomic correlations in Al–In, Ag–In and In–Sb liquid alloys. Using the value of the ordering energy obtained from the model, some thermodynamic quantities such as Gibbs energy of mixing and concentration-concentration fluctuations in the long wavelength limit were calculated for these alloys. Our study of the energetics of these liquid alloys reveals that while In–Sb and Ag–In are both chemically ordered or heterocoordinated systems, Al–In is a segregating system. Furthermore, the degree of order in liquid In–Sb alloys is higher than that in liquid Ag–In alloys.
References
[1] R.N. Singh: Can. J. Phys. 65 (1987) 309.10.1139/p87-038Search in Google Scholar
[2] R.N. Singh: J. Phys. Chem. 25 (1993) 251.10.1080/00319109308030365Search in Google Scholar
[3] R.N. Singh, K. Mishra: Phys. Chem. Liq. 18 (1988) 303.10.1080/00319108808078606Search in Google Scholar
[4] L.C. Prasad, R.N. Singh: Phys. Rev. B 44 (1991) 13768.10.1103/PhysRevB.44.13768Search in Google Scholar
[5] O. Akinlade: Mod. Phys. Lett. B 11 (1997) 93.10.1142/S0217984997000141Search in Google Scholar
[6] A. Cartier, J. Barriol: Physica B 81 (1976) 35.10.1016/0378-4363(76)90236-9Search in Google Scholar
[7] O. Akinlade: Phys. Chem. Liq. 29 (1995) 9.10.1080/00319109508030260Search in Google Scholar
[8] R. Hultgren, P. Desai, D.T. Hawkins, M. Gleiser, K.K. Kelley: Selected Values of the Thermodynamic Properties of Binary Alloys, ASM, Materials Park, OH (1973).Search in Google Scholar
© 2003 Carl Hanser Verlag, München
Articles in the same Issue
- Frontmatter
- Articles/Aufsätze
- Thermodynamics of liquid Al–In, Ag–In and In–Sb alloys from a four-atom cluster model
- Enthalpies of mixing of liquid Al–Fe–Ge alloys
- EMF study of liquid Al–Fe–Ge alloys
- Activity measurements of Ga in liquid Ga–Tl alloys by EMF method with zirconia solid electrolyte
- Effect of microstructural variation on the Cu/CK45 carbon steel friction weld joint
- Thermal loading of steel in molten aluminium
- Effect of modes of rolling on evolution of texture in pure copper and some copper base alloys
- Microstructure and fatigue strength of A356 alloy castings refined on the surface by rapid crystallization
- The shape of extrusions and intrusions produced by cyclic straining
- The fracture toughness of Mg2Si determined by 3-point bending and the indentation microcracking method
- Fabrication of Mo coatings on cast-iron substrates by a plasma spray system
- Influence of Cu and Sn addition on the corrosion resistance of AISI 304 stainless steel in acid media
- Editorial
- Laudatio in honour of Professor Herbert Gleiter
- Notifications/Mitteilungen
- Personal/Personelles
- Books/Bücher
- News
- DGM Events
Articles in the same Issue
- Frontmatter
- Articles/Aufsätze
- Thermodynamics of liquid Al–In, Ag–In and In–Sb alloys from a four-atom cluster model
- Enthalpies of mixing of liquid Al–Fe–Ge alloys
- EMF study of liquid Al–Fe–Ge alloys
- Activity measurements of Ga in liquid Ga–Tl alloys by EMF method with zirconia solid electrolyte
- Effect of microstructural variation on the Cu/CK45 carbon steel friction weld joint
- Thermal loading of steel in molten aluminium
- Effect of modes of rolling on evolution of texture in pure copper and some copper base alloys
- Microstructure and fatigue strength of A356 alloy castings refined on the surface by rapid crystallization
- The shape of extrusions and intrusions produced by cyclic straining
- The fracture toughness of Mg2Si determined by 3-point bending and the indentation microcracking method
- Fabrication of Mo coatings on cast-iron substrates by a plasma spray system
- Influence of Cu and Sn addition on the corrosion resistance of AISI 304 stainless steel in acid media
- Editorial
- Laudatio in honour of Professor Herbert Gleiter
- Notifications/Mitteilungen
- Personal/Personelles
- Books/Bücher
- News
- DGM Events