Startseite Technik Microstructure and Wear of Zinc-Aluminium Alloys: Influence of Secondary Processing and Alloy Composition
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Microstructure and Wear of Zinc-Aluminium Alloys: Influence of Secondary Processing and Alloy Composition

  • Om Prakash Modi , Rana Pratap Yadav , Braj Kishore Prasad , Amol Kumar Jha , Satyabrata Das und Ariyur Halasyam Yegneswaran
Veröffentlicht/Copyright: 24. Oktober 2023
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 90 Heft 6

Published Online: 2023-10-24
Published in Print: 1999-06-01

© 2023 by Walter de Gruyter Berlin/Boston

Artikel in diesem Heft

  1. Inhalt
  2. Temperature Induced Forming: Application of Bridging Flocculation to Near-Net Shape Production of Ceramic Parts
  3. Creep Behavior and Microstructural Evolution of a Near-γ-TiAl Alloy with Duplex Microstructure
  4. Cemented Carbides with Uniform Microstructure
  5. Experimental Enthalpy of Mixing of Liquid Al-Ga-Zn Alloys and Redlich-Kister Modelling
  6. The Nb-Hf-Si Ternary Phase Diagram: Liquid- Solid Phase Equilibria in Nb- and Hf-rich Alloys
  7. Diffusion of Magnesium in Commercial Al-Mg Alloy under High Pressure
  8. Effect of Strain Rate and Temperature of Tensile Test on Lüders Strain in Al-Mg Alloys
  9. Evaluation of Superplastic Formability for a 5083 Al-Mg alloy
  10. Microstructure and Wear of Zinc-Aluminium Alloys: Influence of Secondary Processing and Alloy Composition
  11. Modified Austempering Effect on Fracture Toughness JIC of Fe-0.6C-1.5Si-0.8Mn Steel
  12. Tensile Flow Behaviour of 2.25Cr-1Mo Ferritic Steel Base Metal and Simulated Heat Affected Zone Structures of 2.25Cr-1Mo Weld Joint
  13. Modulated Microstructure Observed in a Slowly Cooled Mn-19.7Cu-7.9Ni-2Fe alloy
  14. Ultrasonic Prediction of Fatigue Failure and Suppression of the Same by Electric Current Pulse Treatment
  15. Prof. Dr.-Ing. Heinz-Joachim Spies zum 65. Geburtstag
  16. Buchbesprechung
  17. TERMINKALENDER / IMPRESSUM
https://doi.org/10.1515/ijmr-1999-900610

Artikel in diesem Heft

  1. Inhalt
  2. Temperature Induced Forming: Application of Bridging Flocculation to Near-Net Shape Production of Ceramic Parts
  3. Creep Behavior and Microstructural Evolution of a Near-γ-TiAl Alloy with Duplex Microstructure
  4. Cemented Carbides with Uniform Microstructure
  5. Experimental Enthalpy of Mixing of Liquid Al-Ga-Zn Alloys and Redlich-Kister Modelling
  6. The Nb-Hf-Si Ternary Phase Diagram: Liquid- Solid Phase Equilibria in Nb- and Hf-rich Alloys
  7. Diffusion of Magnesium in Commercial Al-Mg Alloy under High Pressure
  8. Effect of Strain Rate and Temperature of Tensile Test on Lüders Strain in Al-Mg Alloys
  9. Evaluation of Superplastic Formability for a 5083 Al-Mg alloy
  10. Microstructure and Wear of Zinc-Aluminium Alloys: Influence of Secondary Processing and Alloy Composition
  11. Modified Austempering Effect on Fracture Toughness JIC of Fe-0.6C-1.5Si-0.8Mn Steel
  12. Tensile Flow Behaviour of 2.25Cr-1Mo Ferritic Steel Base Metal and Simulated Heat Affected Zone Structures of 2.25Cr-1Mo Weld Joint
  13. Modulated Microstructure Observed in a Slowly Cooled Mn-19.7Cu-7.9Ni-2Fe alloy
  14. Ultrasonic Prediction of Fatigue Failure and Suppression of the Same by Electric Current Pulse Treatment
  15. Prof. Dr.-Ing. Heinz-Joachim Spies zum 65. Geburtstag
  16. Buchbesprechung
  17. TERMINKALENDER / IMPRESSUM
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2026 De Gruyter Brill
Heruntergeladen am 1.2.2026 von https://www.degruyterbrill.com/document/doi/10.1515/ijmr-1999-900610/html
Button zum nach oben scrollen