Home Technology Elevated Temperature Properties of Short-fiber Reinforced AlSi9Cu3 Produced by Pressure Die-casting
Article
Licensed
Unlicensed Requires Authentication

Elevated Temperature Properties of Short-fiber Reinforced AlSi9Cu3 Produced by Pressure Die-casting

  • Helmut Kaufmann , Reinhard Auer-Knöbl and Hans Peter Degischer
Published/Copyright: April 22, 2021
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 85 Issue 4

Published Online: 2021-04-22
Published in Print: 1994-04-01

© 2021 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Inhalt
  2. Aufsätze
  3. Glass Formation in Mechanically Alloyed 3d-Transıtion Metal-Tantalum Alloys
  4. Thermodynamic Analysıs and Evaluation of the Nitrogen Solubility in Liquid Nb and Fe-Nb Alloys
  5. Phase Equilibria in the System In-Ir-As at 600 °C
  6. Room Temperature Slip in a Molybdenum Bierystal Prepared by Means of Secondary Reecrystallization
  7. Thermomechanical Treatment of Spinodal Cu-32Ni-2Cr Alloy
  8. Elevated Temperature Properties of Short-fiber Reinforced AlSi9Cu3 Produced by Pressure Die-casting
  9. Fallstudie zur werkstoffmechanischen Modellierung der pulvermetallurgisch hergestellten Aluminiumlegierung AlZn11Mg3Cul.5Mn0.6
  10. The Influence of Powder Particle Size on the Mechanical Properties of Two Rapidly Solidified Al-Fe-Ce Alloys Part 1: Powder Characteristics
  11. The Influence of Powder Particle Size on the Mechanical Properties of Two Rapidly Solidified Al-Fe-Ce Alloys Part 2: Mechanical Properties
  12. Plastizität und Bruch eines austenitischferritischen Duplexstahles
  13. Characterization of Low-cycle Fatigue and Creep-fatigue Induced Damage in a 316L Stainless Steel
  14. Fatigue Behaviour of Rope Eutectoid Steel Wires
  15. Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
  16. Pasonen
  17. Buchbesprechungen
  18. VERANSTALTUNGEN
  19. Impressum
https://doi.org/10.1515/ijmr-1994-850407

Articles in the same Issue

  1. Inhalt
  2. Aufsätze
  3. Glass Formation in Mechanically Alloyed 3d-Transıtion Metal-Tantalum Alloys
  4. Thermodynamic Analysıs and Evaluation of the Nitrogen Solubility in Liquid Nb and Fe-Nb Alloys
  5. Phase Equilibria in the System In-Ir-As at 600 °C
  6. Room Temperature Slip in a Molybdenum Bierystal Prepared by Means of Secondary Reecrystallization
  7. Thermomechanical Treatment of Spinodal Cu-32Ni-2Cr Alloy
  8. Elevated Temperature Properties of Short-fiber Reinforced AlSi9Cu3 Produced by Pressure Die-casting
  9. Fallstudie zur werkstoffmechanischen Modellierung der pulvermetallurgisch hergestellten Aluminiumlegierung AlZn11Mg3Cul.5Mn0.6
  10. The Influence of Powder Particle Size on the Mechanical Properties of Two Rapidly Solidified Al-Fe-Ce Alloys Part 1: Powder Characteristics
  11. The Influence of Powder Particle Size on the Mechanical Properties of Two Rapidly Solidified Al-Fe-Ce Alloys Part 2: Mechanical Properties
  12. Plastizität und Bruch eines austenitischferritischen Duplexstahles
  13. Characterization of Low-cycle Fatigue and Creep-fatigue Induced Damage in a 316L Stainless Steel
  14. Fatigue Behaviour of Rope Eutectoid Steel Wires
  15. Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
  16. Pasonen
  17. Buchbesprechungen
  18. VERANSTALTUNGEN
  19. Impressum
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 2.2.2026 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-1994-850407/html
Scroll to top button