The Influence of Stress Field on the Weld Toe Cracking of Weld Joints of 7000 Alloy Plates

Artikel in diesem Heft

1. Analysis of Subgrain Boundaries in the y’ Phase of a Nickel-Base Single Crystal Alloy After High Temperature Creep
2. Recrystallization Behavior of Al-Fe-Alloy Foils With Rapid Heating
3. Nucleation of the Proeutectoid Ferrite and its Role in the Formation of the Transformation Texture in a Low Carbon Steel
4. Thermodynamic Behaviour of Pd-Si, Pd-Ge and Pt-Ge Molten Alloys
5. Deformation of Al-2 wt.% Ge and Al-4 wt.% Ge Alloys in the Presence of Precipitation of Varying Amounts
6. Deformation of Al-Si and Al-Fe High Purity Alloys in the Presence of Precipitation of Varying Amounts
7. Thermodynamische Berechnung der Phasengleichgewichte des Systems Li-LiH im Temperaturbereich von 450 bis 1200 K
8. Friction-Induced Martensitic Transformation of Hot-Rolled Austenitic Mn-Steels
9. Thermodynamic Properties of Ternary B2-Phases with Triple-Defects
10. Phase Relations and Diffusion Paths in the System Zinc Vapor — Iron Silicon Alloys at 773 and 973 K
11. Thermodynamics and Solidification of Al-Cu-Mg-Si Alloys
12. A Thermodynamic Evaluation of the C-Ni-W System
13. The Influence of Stress Field on the Weld Toe Cracking of Weld Joints of 7000 Alloy Plates
14. Gesellschaftsnachrichten
15. Bücher- und Zeitschriftenschau