A Novel Modified Starch/Carboxymethyl Cellulose/Montmorillonite Bionanocomposite Film: Structural and Physical Properties

References

1. VromanI, TighzertL. Biodegradable polymers. Materials2009;2:307–44.10.3390/ma2020307Search in Google Scholar

2. MaliS, SakanakaLS, YamashitaF, GrossmannMV. Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect. Carbohydr Polym2005;60:283–9.10.1016/j.carbpol.2005.01.003Search in Google Scholar

3. MarinielloL, GiosafattoCV, MoschettiG, AponteM, MasiP, SorrentinoA, et al. Fennel waste-based films suitable for protecting cultivations. Biomacromolecules2007;8:3008–14.10.1021/bm0702410Search in Google Scholar PubMed

4. BertuzziMA, ArmadaM, GottifrediJC. Physicochemical characterization of starch based films. J Food Eng2007;82:17–25.10.1016/j.jfoodeng.2006.12.016Search in Google Scholar

5. Romero-BastidaCA, Bello-PerezLA, GarciaMA, MartinoMN, Solorza-FeriaJ, ZarintzkyNE. Physicochemical and microstructural characterization of films prepared by thermal and cold gelatinization from non-conventional sources of starches. Carbohydr Polym2005;60:235–44.10.1016/j.carbpol.2005.01.004Search in Google Scholar

6. TaljaRA, HelenH, RoosYH, JouppilaK. Effect of various polyols and polyol contents on physical and mechanical properties of potato starch-based films. Carbohydr Polym2007;67:288–95.10.1016/j.carbpol.2006.05.019Search in Google Scholar

7. AverousL, BoquillonN. Biocomposites based on plasticized starch: thermal and mechanical behaviours. Carbohydr Polym2004;56:111–22.10.1016/j.carbpol.2003.11.015Search in Google Scholar

8. RaySS, OkamotoM. Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci2003;28:1539–44.10.1016/j.progpolymsci.2003.08.002Search in Google Scholar

9. HuangM, YuJ, MaX, PengJ. High performance biodegradable thermoplastic starch-EMMT nanoplastics. Polymer2005;46:3157–64.10.1016/j.polymer.2005.01.090Search in Google Scholar

10. PukanszkyB, MullerP, BagdiK. Thermoplastic starch/layered silicate composites: structure, interaction, properties. Composite Interfaces2006;13:1–17.10.1163/156855406774964364Search in Google Scholar

11. LuYS, WengLH, CaoXD. Biocomposites of plasticized starch reinforced with cellulose crystallites from cottonseed linter. Macromol Biosci2005;5:1101–7.10.1002/mabi.200500094Search in Google Scholar PubMed

12. LuYS, WengLH, CaoXD. Morphological, thermal and mechanical properties of ramie crystallites-reinforced plasticized starch biocomposites. Carbohydr Polym2006;63:198–204.10.1016/j.carbpol.2005.08.027Search in Google Scholar

13. MaX, ChangPR, YuJ. Properties of biodegradable thermoplastic pea starch/carboxymethyl cellulose and pea starch/microcrystalline cellulose composites. Carbohydr Polym2008;72:369–75.10.1016/j.carbpol.2007.09.002Search in Google Scholar

14. WangN, YuJG, HanCM. Influence of citric acid on the properties of glycerol-plasticised Cornstarch extrusion blends. Polym Polym Composites2007;15:545–52.10.1177/096739110701500704Search in Google Scholar

15. MaX, ChangPR, YuJ, Mark StumborgM. Properties of biodegradable citric acid-modified granular starch/thermoplastic pea starch composites. Carbohydr Polym2009;75:1–8.10.1016/j.carbpol.2008.05.020Search in Google Scholar

16. GarciaA, EceolazaS, IriarteM, UriarteC, EtxeberriaA. Barrier character improvement of an amorphous polyamide (Trogamid) by the addition of nanoclay. J Membr Sci2007;301:190–9.10.1016/j.memsci.2007.06.018Search in Google Scholar

17. GolebiewskiJ, GaleskiA. Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGA. Composites Sci Technol2007;311:68–75.Search in Google Scholar

18. TuncS, AngellierH, CahyanaY, ChalierP, GontardN, GastaldiE. Functional properties of wheat gluten/montmorillonite nanocomposite films processed by casting. J Membr Sci2007;289:159–68.10.1016/j.memsci.2006.11.050Search in Google Scholar

19. ZhengJP, LiP, YaoKD. Preparation and characterization of gelatin/montmorillonite nanocomposite. J Mater Sci Lett2002;21:779–81.10.1023/A:1015701809579Search in Google Scholar

20. ChivracF, PolletE, DoleP, AverousL. Starch-based nano-biocomposites: plasticizer impact on the montmorillonite exfoliation process. Carbohydr Polym2010;17:941–7.10.1016/j.carbpol.2009.10.018Search in Google Scholar

21. CyrasVP, ManfrediLB, Ton-ThatM, VazquezA. Physical and mechanical properties of thermoplastic starch/montmorillonite nanocomposite films. Carbohydr Polym2008;73:55–63.10.1016/j.carbpol.2007.11.014Search in Google Scholar

22. HuangMF, YuJG, MaXF. Studies on the properties of montmorillonite reinforced thermoplastic starch composites. Polymer2004;45:7017–23.10.1016/j.polymer.2004.07.068Search in Google Scholar

23. HuangMF, YuJG, MaXF. High mechanical performance MMT-urea and formamide-plasticized thermoplastic corn starch biodegradable nanocomposites. Carbohydr Polym2006;63:393–9.10.1016/j.carbpol.2005.09.006Search in Google Scholar

24. ParkH, LiX, JinC, ParkC, ChoW, HaC. Preparation and properties of biodegradable thermoplastic starch/clay hybrids. Macromol Mater Eng2002;287:553–8.10.1002/1439-2054(20020801)287:8<553::AID-MAME553>3.0.CO;2-3Search in Google Scholar

25. ZhangQ, YuZ, XieX, NaitoK, KagawaY. Preparation and crystalline morphology of biodegradable starch/clay nanocomposites. Polymer2007;48:7193–200.10.1016/j.polymer.2007.09.051Search in Google Scholar

26. HerrmannPS, YoshidaCM, AntunesAT, MarcondesJA. Surface evaluation of whey protein films by atomic force microscopy and water vapour permeability analysis. Packaging Technol Sci2004;17:267–73.10.1002/pts.662Search in Google Scholar

27. ASTM D882-91. Standard test methods for tensile properties of thin plastic sheeting. Annual Book of ASTM Standards, Philadelphia, PA 1991:159–63.Search in Google Scholar

28. ASTM E96-95.Standard test methods for water vapor transmission of material. Annual Book of ASTM Standards, Philadelphia, PA 1995:61–9.Search in Google Scholar

29. MaliS, GrossmannMV, GarciaMA, MartinoMN, ZaritzkyNE. Effects of controlled storage on thermal, mechanical and barrier properties of plasticized films from different starch sources. J Food Eng2006;75:453–60.10.1016/j.jfoodeng.2005.04.031Search in Google Scholar

30. VaiaRA, GiannelisEP. Liquid crystal polymer nanocomposites: direct intercalation of thermotropic liquid crystalline polymers into layered silicates. Polymer2001;42:1281–5.10.1016/S0032-3861(00)00508-5Search in Google Scholar

31. BuleonA, ColonnaP, PlanchotV, BallS. Starch granules: structure and biosynthesis, mini review. Int J Biol Macromols1998;23:85–112.10.1016/S0141-8130(98)00040-3Search in Google Scholar

32. ChenB, EvansJR. Thermoplastic starch–clay nanocomposites and their characteristics. Carbohydr Polym2005;61:455–63.10.1016/j.carbpol.2005.06.020Search in Google Scholar

33. ChiouB, WoodD, YeeE, ImamSH, GlennGM, OrtsWJ. Extruded starch–nanoclay nanocomposites: effects of glycerol and nanoclay concentration. Polym Eng Sci2007;1002:1898–904.10.1002/pen.20903Search in Google Scholar

34. ShiR, ZhangZZ, LiuQY, HanYM, ZhangLQ, ChenDF. Characterization of citric acid/glycerol co-plasticized thermoplastic starch prepared by melt blending. Carbohydr Polym2007;69:748–55.10.1016/j.carbpol.2007.02.010Search in Google Scholar

35. AvellaM, VliegerJD, ErricoME, FischerS, VaccaP, VolpeMG. Biodegradable starch/clay nanocomposite films for food packaging applications. Food Chem2005;93:467–74.10.1016/j.foodchem.2004.10.024Search in Google Scholar

36. ArvanitoyannisI, BiliaderisCG. Physical properties of polyol-plasticized edible blends made of methyl cellulose and soluble starch. Carbohydr Polym1999;38:47–58.10.1016/S0144-8617(98)00087-3Search in Google Scholar

37. GasparM, BenkoZ, DogossyG, ReczeyK, CziganyT. Reducing water absorption in compostable starch-based plastics. Polym Degradation Stability2005;90:563–9.10.1016/j.polymdegradstab.2005.03.012Search in Google Scholar

38. KristoE, BiliaderisCG. Physical properties of starch nanocrystal reinforced films. Carbohydr Polym2007;29:254–9.Search in Google Scholar

39. WilhelmHM, SierakowskiMR, SouzaGP, WypychF. Starch films reinforced with mineral clay. Carbohydr Polym2003;52:101–10.10.1016/S0144-8617(02)00239-4Search in Google Scholar

40. RhimJW, HongS, HaC. Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films. LWT – Food Sci Technol2009;42:612–17.10.1016/j.lwt.2008.02.015Search in Google Scholar

41. GiannakasA, SpanosCG, KourkoumelisN, VaimakisT, LadavosA. Preparation, characterization and water barrier properties of PS/organo-montmorillonite nanocomposites. Eur Polym J2008;53:1233–9.Search in Google Scholar

42. SothornvitR, RhimJW, HongSI. Effect of nano-clay type onthe physical and antimicrobial properties of whey protein isolate/clay composite films. J Food Eng2008;85:66–74.Search in Google Scholar

43. YanoK, UsukiA, OkadaAJ. Synthesis and properties of polyimideclay hybrid films. Polym Sci1997;35:2289–94.10.1002/(SICI)1099-0518(199708)35:11<2289::AID-POLA20>3.0.CO;2-9Search in Google Scholar

44. PearovalC, DebeaufortF, DespreaD, VoilleA. Edible arabinoxylan-based films: effects of lipid type on water vapour permeability, film structure, and other physical characteristics. J Agric Food Chem2002;50:3977–83.10.1021/jf0116449Search in Google Scholar