Startseite Preparation of mesoporous lignin-based aerogels for organic dyes removal
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Preparation of mesoporous lignin-based aerogels for organic dyes removal

  • Yingying Zhang , Xianke Hu , Jie Yang , Ying Kang EMAIL logo , Jie Wei und Dawei Fang EMAIL logo
Veröffentlicht/Copyright: 13. März 2025
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Chemical Reactor Engineering
Aus der Zeitschrift International Journal of Chemical Reactor Engineering Band 23 Heft 2

Abstract

The efficient use of biomass and the treatment of dye-contaminated wastewater are urgent issues. In this study, a novel mesoporous lignin-based composite aerogel (SL/CMX/AM) is synthesized via a chemical cross-linking/freeze-drying method, and its structure was characterized by SEM, FI-TR, and BET. The results showed that the structure of aerogel was mesoporous with dimensions ranging from 10 to 50 nm. The mesoporous lignin-based composite aerogels were further applied for the adsorption of dyes. The results revealed that the optimal purifying conditions were as follows: the pH of MB solution was 11, the mass of the aerogel was 0.0100 g, the concentration was 200 mg g−1, the adsorption time was 720 min, and the adsorption temperature was 313.15 K, producing the highest adsorption capacity of 39.80 mg g−1. The adsorption mechanism was discussed. The adsorption process followed the pseudo-second-order model and was fitted to the Langmuir isotherm model. The thermodynamic parameters indicated that the adsorption of dyes onto the investigated material was an endothermic and spontaneous reaction at 293.15–313.15 K. Overall, this work guides the preparation of mesoporous lignin-based composite aerogels and their potential application in addressing dye-contaminated wastewater problems.

Keywords: mesoporous lignin-based composite aerogels; dye-contaminated wastewater; synthesis mechanism; adsorption kinetic study; adsorption isotherms
Corresponding authors: Ying Kang and Dawei Fang, Institute of Rare and Scattered Elements, College of Chemistry, Liaoning University, Shenyang, 110036, P.R. China, E-mail: (Y. Kang), (D. Fang)

Funding source: Key Technologies R & D Program of Liaoning Provincial Department of Education

Award Identifier / Grant number: LJKZZ20220018

Funding source: Project of the Education Department of Liaoning Province

Award Identifier / Grant number: JYTMS20230771

Funding source: Liaoning Revitalization Talents Program

Award Identifier / Grant number: XLYC2202040

Funding source: National Natural Science Foundation of China

Award Identifier / Grant number: 22403040, 22173039

  1. Research ethics: Not applicable.

  2. Informed consent: Informed consent was obtained from all individuals included in this study, or their legal guardians or wards.

  3. Author contributions: All authors have accepted responsibility for the entire content of this manuscript and approved its submission.

  4. Use of Large Language Models, AI and Machine Learning Tools: None declared.

  5. Conflict of interest: The authors state no conflict of interest.

  6. Research funding: This work was supported by the Project of the Education Department of Liaoning Province (JYTMS20230771); National Natural Science Foundation of China (22403040,22173039); Liaoning Revitalization Talents Program (XLYC2202040); and Key Technologies R & D Program of Liaoning Provincial Department of Education (LJKZZ20220018).

  7. Data availability: The raw data can be obtained on request from the corresponding author.

References

[1] A. E. Santhanarajan, et al.., “Transcriptomic analysis of degradative pathways for azo dye acid blue 113 in sphingomonas melonis B-2 from the dye wastewater treatment process,” Microorganisms, vol. 10, no. 2, p. 438, 2022. https://doi.org/10.3390/microorganisms10020438.Suche in Google Scholar PubMed PubMed Central

[2] M. Hasanpour and M. Hatami, “Photocatalytic performance of aerogels for organic dyes removal from wastewaters: review study,” J. Mol. Liq., vol. 309, p. 113094, 2020. https://doi.org/10.1016/j.molliq.2020.113094.Suche in Google Scholar

[3] A. Ahmadi, R. Foroutan, H. Esmaeili, S. J. Peighambardoust, S. Hemmati, and B. Ramavandi, “Montmorillonite clay/starch/CoFe2O4 nanocomposite is a superior functional material for the uptake of cationic dye molecules from water and wastewater,” Mater. Chem. Phys., vol. 284, p. 126088, 2022, https://doi.org/10.1016/j.matchemphys.2022.126088.Suche in Google Scholar

[4] M. Hasanpour, M. Hatami, “Photocatalytic Performance of Aerogels for Organic Dyes Removal from Wastewaters: Review Study,” Journal of Molecular Liquids, vol. 309, p. 113094, 2020. https://doi.org/10.1016/j.molliq.2020.113094.Suche in Google Scholar

[5] J. W. Heo, L. An, J. Chen, J. H. Bae, and Y. S. Kim, “Preparation of amine-functionalized lignins for the selective adsorption of methylene blue and Congo red,” Chemosphere, vol. 295, p. 133815, 2022, https://doi.org/10.1016/j.chemosphere.2022.133815.Suche in Google Scholar PubMed

[6] I. Ali, M. Asim, and T. A. Khan, “Low-cost adsorbents for the removal of organic pollutants from wastewater,” J. Environ. Manage., vol. 113, pp. 170–183, 2012, https://doi.org/10.1016/j.jenvman.2012.08.028.Suche in Google Scholar PubMed

[7] S. Dawood and T. Sen, “Review on dye removal from its aqueous solution into alternative cost effective and non-conventional adsorbents,” J. Chem. Process Eng., vol. 1, no. 104, pp. 1–11, 2014.Suche in Google Scholar

[8] Y. Yuebei, et al.., “Adsorption behavior and mechanism of sulfonamides on phosphonic chelating cellulose under different pH effects,” Bioresour. Technol., vol. 288, p. 121510, 2019, https://doi.org/10.1016/j.biortech.2019.121510.Suche in Google Scholar PubMed

[9] Z. Yingjie, Z. Huifang, Z. Xudong, Y. Qu, and D. Liu, “Synergistic effect of electrostatic and coordination interactions for adsorption removal of cephalexin from water using a zirconium-based metal-organic framework,” J. Colloid Interface Sci., vol. 580, pp. 256–263, 2020, https://doi.org/10.1016/j.jcis.2020.07.013.Suche in Google Scholar PubMed

[10] Z. Yong, et al.., “A green and efficient deproteination method for polysaccharide from meretrix meretrix linnaeus by copper ion chelating aerogel adsorption,” J. Cleaner Prod., vol. 252, p. 119842, 2020, https://doi.org/10.1016/j.jclepro.2019.119842.Suche in Google Scholar

[11] M. Hasanpour and M. Hatami, “Application of three-dimensional porous aerogels as adsorbent for removal of heavy metal ions from water/wastewater: a review study,” Adv. Colloid Interface Sci., vol. 284, p. 102247, 2020, https://doi.org/10.1016/j.cis.2020.102247.Suche in Google Scholar PubMed

[12] N. Zhang, N. Cheng, and Q. Liu, “Retracted: functionalized biomass carbon-based adsorbent for simultaneous removal of Pb2+ and MB in wastewater,” Materials, vol. 14, no. 13, p. 3537, 2021. https://doi.org/10.3390/ma14133537.Suche in Google Scholar PubMed PubMed Central

[13] M. Hasanpour, M. Hatami, and B. Afsari, “Natural polymer gels, hydrogels, and aerogels for absorbent applications,” Eng. Nat. Poly. Gels Aerogels Multifunct. Appl., vol. 2024, pp. 159–204, 2024, https://doi.org/10.1016/b978-0-12-823135-7.00005-x.Suche in Google Scholar

[14] F. Niu, N. Wu, J. Yu, and X. Ma, “Gelation, flame retardancy, and physical properties of phosphorylated microcrystalline cellulose aerogels,” Carbohy. Polym., vol. 242, p. 116422, 2020, https://doi.org/10.1016/j.carbpol.2020.116422.Suche in Google Scholar PubMed

[15] C. He, et al.., “Mechanically resistant and sustainable cellulose-based composite aerogels with excellent flame retardant, sound absorption, and superantiwetting ability for advanced engineering materials,” ACS Sustain. Chem. Eng., vol. 6, no. 1, pp. 927–936, 2018. https://doi.org/10.1021/acssuschemeng.7b03281.Suche in Google Scholar

[16] M. Fauziyah, W. Widiyastuti, R. Balgis, and H. Setyawan, “Production of cellulose aerogels from coir fibers via an alkali-urea method for sorption applications,” Cellulose, vol. 26, pp. 9583–9598, 2019, https://doi.org/10.1007/s10570-019-02753-x.Suche in Google Scholar

[17] L. I. Grishechko, et al.., “New tannin-lignin aerogels,” Ind. Crops Prod., vol. 41, pp. 347–355, 2013, https://doi.org/10.1016/j.indcrop.2012.04.052.Suche in Google Scholar

[18] S. Takeshita, S. Akasaka, and S. Yoda, “Structural and acoustic properties of transparent chitosan aerogel,” Mater. Lett., vol. 254, pp. 258–261, 2019, https://doi.org/10.1016/j.matlet.2019.07.064.Suche in Google Scholar

[19] M. Hasanpour, S. Motahari, D. Jing, and M. Hatami, “Investigation of operation parameters on the removal efficiency of methyl orange pollutant by cellulose/zinc oxide hybrid aerogel,” Chemosphere, vol. 284, p. 131320, 2021, https://doi.org/10.1016/j.chemosphere.2021.131320.Suche in Google Scholar PubMed

[20] M. Hasanpour, S. Motahari, D. Jing, and M. Hatami, “Investigation of the different morphologies of zinc oxide (ZnO) in cellulose/zno hybrid aerogel on the photocatalytic degradation efficiency of methyl orange,” Top. Catal., vol. 67, pp. 1334–1347, 2024, https://doi.org/10.1007/s11244-021-01476-3.Suche in Google Scholar

[21] M. Hasanpour, “Microcrystalline cellulose/graphene oxide aerogel for adsorption of cationic dye from aqueous solution,” Mater. Sci. Technol., vol. 39, no. 17, pp. 2730–2742, 2023. https://doi.org/10.1080/02670836.2023.2216551.Suche in Google Scholar

[22] X. Kong, et al.., “Critical roles of the oxygen-containing functional groups via β-O-4 lignin linkage hydrogenolysis over copper catalysts,” ACS Sustain. Chem. Eng., vol. 9, no. 32, pp. 10939–10947, 2021. https://doi.org/10.1021/acssuschemeng.1c03662.Suche in Google Scholar

[23] P. Li, J. Ren, Z. Jiang, L. Huang, C. Wu, and W. Wu, “Review on the preparation of fuels and chemicals based on lignin,” RSC Advance, vol. 12, no. 17, pp. 10289–10305, 2022. https://doi.org/10.1039/d2ra01341j.Suche in Google Scholar PubMed PubMed Central

[24] R. Hong, et al.., “Construction of PVA-lignosulfonate hydrogels for improved mechanical performances and all-in-one flexible supercapacitors,” Int. J. Biol. Macromol., vol. 225, pp. 1494–1504, 2023, https://doi.org/10.1016/j.ijbiomac.2022.11.206.Suche in Google Scholar PubMed

[25] Y. Yuan, S. Wang, P. Wu, T. Yuan, and X. Wang, “Lignosulfonate in situ-modified reduced graphene oxide biosensors for the electrochemical detection of dopamine,” RSC Adv., vol. 12, no. 48, pp. 31083–31090, 2022. https://doi.org/10.1039/d2ra05635f.Suche in Google Scholar PubMed PubMed Central

[26] S. Meng, et al.., “Porous 3D-biocomposite adsorbent for iron reclamation and use in agricultural applications,” ACS Appl. Polym. Mater., vol. 4, no. 11, pp. 8277–8289, 2022. https://doi.org/10.1021/acsapm.2c01198.Suche in Google Scholar

[27] Z. H. Sun, B. Fridrich, A. Santi, S. Elangovan, and K. Barta, “Bright side of lignin depolymerization: toward new platform chemicals,” Chem. Rev., vol. 118, no. 2, pp. 614–678, 2018. https://doi.org/10.1021/acs.chemrev.7b00588.Suche in Google Scholar PubMed PubMed Central

[28] H. A. M. Bacelo, S. C. R. Santos, and C. M. S. Botelho, “Tannin-based biosorbents for environmental applications-A review,” Chem. Eng. J., vol. 303, pp. 575–587, 2016, https://doi.org/10.1016/j.cej.2016.06.044.Suche in Google Scholar

[29] H. Yu, J. Yang, P. Shi, M. Li, and J. Bian, “Synthesis of a lignin-Fe/Mn binary oxide blend nanocomposite and its adsorption capacity for methylene blue,” ACS Omega, vol. 6, no. 26, pp. 16837–16846, 2021. https://doi.org/10.1021/acsomega.1c01405.Suche in Google Scholar PubMed PubMed Central

[30] F. Chen, et al.., “High-yield production of lignin-derived functional carbon nanosheet for dye adsorption,” Polymers, vol. 12, no. 4, p. 797, 2020. https://doi.org/10.3390/polym12040797.Suche in Google Scholar PubMed PubMed Central

[31] X. Guo, S. Zhang, and X. Shan, “Adsorption of metal ions on lignin,” J. Hazard. Mater., vol. 151, no. 1, pp. 134–142, 2008. https://doi.org/10.1016/j.jhazmat.2007.05.065.Suche in Google Scholar PubMed

[32] Y. A. Aydın and N. D. Aksoy, “Adsorption of chromium on chitosan: optimization, kinetics and thermodynamics,” Chem. Eng. J., vol. 151, no. 1–3, pp. 188–194, 2009. https://doi.org/10.1016/j.cej.2009.02.010.Suche in Google Scholar

[33] F. Gu, J. Geng, M. Li, J. Chang, and Y. Cui, “Synthesis of chitosan-ignosulfonate composite as an adsorbent for dyes and metal ions removal from wastewater,” ACS Omega, vol. 4, no. 25, pp. 21421–21430, 2019. https://doi.org/10.1021/acsomega.9b03128.Suche in Google Scholar PubMed PubMed Central

[34] X. Han, et al.., “Design, synthesis and adsorption evaluation of bio-based lignin/chitosan beads for Congo red removal,” Materials, vol. 15, no. 6, p. 2310, 2022. https://doi.org/10.3390/ma15062310.Suche in Google Scholar PubMed PubMed Central

[35] S. Sohni, H. Rokiah, H. Nidaullah, J. Lamaming, and O. Sulaiman, “Chitosan/nano-lignin based composite as a new sorbent for enhanced removal of dye pollution from aqueous solutions,” Int. J. Biol. Macromol., vol. 132, pp. 1304–1317, 2019, https://doi.org/10.1016/j.ijbiomac.2019.03.151.Suche in Google Scholar PubMed

[36] J. T. Price, W. Gao, and P. Fatehi, “Lignin-g-poly (acrylamide)-g-poly (diallyldimethyl- ammonium chloride): synthesis, characterization and applications,” ChemistryOpen, vol. 7, no. 8, pp. 645–658, 2018. https://doi.org/10.1002/open.201800105.Suche in Google Scholar PubMed PubMed Central

[37] Z. He, M. Wang, and S. Ma, “Porous lignin-based composites for oil/water separation: a review,” Int. J. Biol. Macromol., vol. 260, p. 129569, 2024, https://doi.org/10.1016/j.ijbiomac.2024.129569.Suche in Google Scholar PubMed

[38] H. Hatakeyama and T. Hatakeyama, “Lignin structure, properties, and applications,” Biopolym.: Lignin, Proteins, Bioact. Nanocompos., vol. 232, pp. 1–63, 2009, https://doi.org/10.1007/12_2009_12.Suche in Google Scholar

[39] X. N. Li, X. Q. Qiu, and H. M. Lou, “Influence of relative molecular mass and sulfonation degree on performance of sodium lignosulfonate as pesticide dispersant,” Fine Chem., vol. 26, p. 755, 2009.Suche in Google Scholar

[40] R. H. Mu, B. Liu, X. Chen, N. Wang, and J. Yang, “Adsorption of Cu (II)and Co (II) from aqueous solution using lignosulfonate/chitosan adsorbent,” Int. J. Biol. Macromol., vol. 163, pp. 120–127, 2020, https://doi.org/10.1016/j.ijbiomac.2020.06.260.Suche in Google Scholar PubMed

[41] Y. B. Yi, et al.., “A green composite hydrogel based on xylan and lignin with adjustable mechanical properties, high swelling, excellent UV shielding, and antioxidation properties,” J. Appl. Polym. Sci., vol. 139, no. 28, p. 52520, 2022. https://doi.org/10.1002/app.52520.Suche in Google Scholar

[42] Y. Takigawa and I. Koshiishi, “Highlighted paper selected by editor-in-chief: catalytic production of oxo-fatty acids by lipoxygenases is mediated by the radical-radical dismutation between fatty acid alkoxyl radicals and fatty acid peroxyl radicals in fatty acid assembly,” Chem. Pharm. Bull., vol. 3, no. 3, pp. 258–264, 2020.10.1248/cpb.c19-00975Suche in Google Scholar PubMed

[43] A. K. Bajpai and J. Shrivastava, “In vitro enzymatic degradation kinetics of polymeric blends of crosslinked starch and carboxymethyl cellulose,” Polym. Int., vol. 54, no. 11, pp. 1524–1536, 2005. https://doi.org/10.1002/pi.1878.Suche in Google Scholar

[44] J. Pan, J. W. Zhu, and F. L. Cheng, “Preparation of sodium lignosulfonate/chitosan adsorbent and application of Pb2+ treatment in water,” Sustainability, vol. 13, no. 5, p. 2997, 2021. https://doi.org/10.3390/su13052997.Suche in Google Scholar

[45] X. X. Teng, et al.., “Preparation and properties of hydrogels based on PEGylated lignosulfonate amine,” ACS Omega, vol. 2, no. 1, pp. 251–259, 2017. https://doi.org/10.1021/acsomega.6b00296.Suche in Google Scholar PubMed PubMed Central

[46] T. Yang, et al.., “Structure and properties of lignin extracted from cotton stalk by non-polluting ethanol-assisted hot water pretreatment and its high-value utilization for methylene blue removal,” Waste Biomass Valorizatio, vol. 14, no. 6, pp. 2085–2101, 2023. https://doi.org/10.1007/s12649-022-01996-3.Suche in Google Scholar

[47] C. Q. Huang, et al.., “Adsorption performance of chitosan schiff base towards anionic dyes: electrostatic interaction effects,” Chem. Phys. Lett., vol. 780, p. 138958, 2021, https://doi.org/10.1016/j.cplett.2021.138958.Suche in Google Scholar

[48] K. X. Zhou, et al.., “Kinetic, isotherm and thermodynamic studies for removal of methylene blue using β-cyclodextrin/activated carbon aerogels,” J. Polym. Environ., vol. 26, pp. 3362–3370, 2018, https://doi.org/10.1007/s10924-018-1219-2.Suche in Google Scholar

[49] M. A. Asbollah, et al.., “Dynamics and thermodynamics for competitive adsorptive removal of methylene blue and rhodamine B from binary aqueous solution onto durian rind,” Environ. Monitor. Assess., vol. 194, no. 9, p. 645, 2022. https://doi.org/10.1007/s10661-022-10332-0.Suche in Google Scholar PubMed

[50] O. L. Li, Z. C. Shi, and L. Hoonseung, “Enhanced electrocatalytic stability of platinum nanoparticles supported on sulfur-doped carbon using in-situ solution plasma,” Sci. Rep., vol. 9, no. 1, p. 12704, 2019.10.1038/s41598-019-49194-xSuche in Google Scholar PubMed PubMed Central

[51] J. Shadmehr, S. Zeinali, and M. Tohidi, “Synthesis of a chromium terephthalate metal organic framework and use as nanoporous adsorbent for removal of diazinon organophosphorus insecticide from aqueous media,” J. Dispersion Sci. Technol., vol. 40, no. 10, pp. 1423–1440, 2019. https://doi.org/10.1080/01932691.2018.1516149.Suche in Google Scholar

[52] T. K. Sen, S. Afroze, and H. M. Ang, “Equilibrium, kinetics and mechanism of removal of methylene blue from aqueous solution by adsorption onto pine cone biomass of pinus radiata,” Water Air Soil Pollut., vol. 218, pp. 499–515, 2011, https://doi.org/10.1007/s11270-010-0663-y.Suche in Google Scholar

[53] T. H. Tu, P. T. N. Cam, L. V. T. Huy, M. T. Phong, H. M. Nam, and N. H. Hieu, “Synthesis and application of graphene oxide aerogel as an adsorbent for removal of dyes from water,” Mater. Lett., vol. 238, pp. 134–137, 2019, https://doi.org/10.1016/j.matlet.2018.11.164.Suche in Google Scholar

[54] Y. H. Deng, X. J. Feng, M. S. Zhou, Y. Qian, H. Yu, and X. Qiu, “Investigation of aggregation and assembly of alkali lignin using iodine as A probe,” Biomacromolecules, vol. 12, no. 4, pp. 1116–1125, 2011. https://doi.org/10.1021/bm101449b.Suche in Google Scholar PubMed

[55] Q. Tang, N. N. Li, Q. C. Lu, X. Wang, and Y. Zhu, “Study on preparation and separation and adsorption performance of knitted tube composite Β-cyclodextrin/chitosan porous membrane,” Polymers, vol. 11, no. 11, p. 1737, 2019. https://doi.org/10.3390/polym11111737.Suche in Google Scholar PubMed PubMed Central

[56] L. B. Li, et al.., “Adsorption of methylene blue by nicandra physaloides (L.) gaertn seed gum/graphene oxide aerogel,” Environ. Technol., vol. 43, no. 15, pp. 2342–2351, 2022. https://doi.org/10.1080/09593330.2021.1877361.Suche in Google Scholar PubMed

[57] L. Semiz, “Removal of reactive black 5 from wastewater by membrane filtration,” Polym. Bull., vol. 77, no. 6, pp. 3047–3059, 2020. https://doi.org/10.1007/s00289-019-02896-8.Suche in Google Scholar

[58] Y. Zhang, et al.., “Synthesis of CaWO4-biochar nanocomposites for organic dye removal,” Mater. Res. Bull., vol. 110, pp. 169–173, 2019, https://doi.org/10.1016/j.materresbull.2018.10.031.Suche in Google Scholar

[59] M. Y. Areeshi, “A review on biological synthesis of ZnO nanostructures and its application in photocatalysis mediated dye degradation: an overview,” Luminescence, vol. 38, no. 7, pp. 1111–1122, 2023. https://doi.org/10.1002/bio.4432.Suche in Google Scholar PubMed

Supplementary Material

This article contains supplementary material (https://doi.org/10.1515/ijcre-2024-0150).

Received: 2024-07-24
Accepted: 2025-02-22
Published Online: 2025-03-13

© 2025 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Review
  3. A critical analysis on synthesis of nanofluids and factors affecting thermal conductivity of nanofluids for heat transfer applications: a review
  4. Articles
  5. Improving iron-bearing dust pellets performance through synergistic action of dual-component organic binders: cellulose and starch interactions
  6. Preparation of mesoporous lignin-based aerogels for organic dyes removal
  7. Power generation potential and assessment of producer gas quality from blended rubber shell and palm kernel shell in open core downdraft gasifier
  8. Bi2S3 loaded MXene Ti3C2T x nanosheet with an adsorption-photocatalytic synergistic removal for tetracycline
  9. Preparation of activated carbon from waste tea and its performance in adsorptive desulfurization of model fuel
  10. Study on friction pressure drop characteristics of gas flow through multi-size irregular high-purity magnesia bed layer
  11. Unlocking sustainable cooling: a numerical analysis of ice slurry flow in 180° U-bends-impacts of bend radius/pipe radius ratios and pressure drops on system performance
  12. DEM investigation on effect of internal pipe on active layer characterization in a drum
https://doi.org/10.1515/ijcre-2024-0150
Schlagwörter für diesen Artikel
mesoporous lignin-based composite aerogels; dye-contaminated wastewater; synthesis mechanism; adsorption kinetic study; adsorption isotherms

Artikel in diesem Heft

  1. Frontmatter
  2. Review
  3. A critical analysis on synthesis of nanofluids and factors affecting thermal conductivity of nanofluids for heat transfer applications: a review
  4. Articles
  5. Improving iron-bearing dust pellets performance through synergistic action of dual-component organic binders: cellulose and starch interactions
  6. Preparation of mesoporous lignin-based aerogels for organic dyes removal
  7. Power generation potential and assessment of producer gas quality from blended rubber shell and palm kernel shell in open core downdraft gasifier
  8. Bi2S3 loaded MXene Ti3C2T x nanosheet with an adsorption-photocatalytic synergistic removal for tetracycline
  9. Preparation of activated carbon from waste tea and its performance in adsorptive desulfurization of model fuel
  10. Study on friction pressure drop characteristics of gas flow through multi-size irregular high-purity magnesia bed layer
  11. Unlocking sustainable cooling: a numerical analysis of ice slurry flow in 180° U-bends-impacts of bend radius/pipe radius ratios and pressure drops on system performance
  12. DEM investigation on effect of internal pipe on active layer characterization in a drum
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 10.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ijcre-2024-0150/html
Button zum nach oben scrollen