Abstract
Photocatalytic treatment of a binary dye mixture (Acid Blue 113 (AB113) and Acid Red 114 (AR114)) has been done in a slurry pond reactor using TiO2 as a photocatalyst with UV light irradiation (UV-C). Two different methods, namely multivariate calibration and first order derivative spectrophotometric were used to quantify each dye separately in binary dye solutions. The behavior of the photocatalytic degradation of a binary dye mixture was predicted using an artificial neural network (ANN) model. Five process parameters (initial concentration of AB113 dye, initial concentration of AR114 dye, TiO2 dose, initial pH of the dye mixture and time were used as inputs and decolorization efficiency of AB113 and AR114 were used as output of the ANN. The parametric optimization has been done by the multi-response optimization with desirability function methodology. Optimization by Central Composite Design (CCD) effectively handles the relations among optimizing process variables and its prediction concurred well with the experimental run and artificial neural network (ANN) model. The reaction kinetic rates of decolorization of both dyes (AB113 and AR114) were found to be first order. Total organic carbon (TOC) removal and possible reaction pathway show the total mineralization of both dyes in binary dye mixture.
Nomenclature
- TiO2 dose
[TiO2]o
- Initial concentration of AB113 dye
[AB113]o
- Initial concentration of AR114 dye
[AR114]o
- pH of the dye solution
[pH]o
- Time
t
- Decolorization of AB113
Y1
- Decolorization of AR114
Y2
References
1. 1. Abo-Farha, S.A., 2010. Photocatalytic degradation of monoazo and diazo dyes in wastewater on nanometer-sized TiO2. Researcher 2, 52–71.Search in Google Scholar
2. 2. Ahmed, Y., Yaakob, Z., Akhtar, P., 2016. Degradation and mineralization of methylene blue using a heterogeneous photo-fenton catalyst under visible and solar light irradiation. Catalysis Science & Technology, doi: 10.1039/C5CY01494H.Search in Google Scholar
3. 3. Aleboyeh, A., Kasiri, M.B., Olya, M.E., Aleboyeh, H., 2008. Prediction of azo dye decolorization by UV/H2O2 using artificial neural networks. Dyes and Pigments 77, 288–294.10.1016/j.dyepig.2007.05.014Search in Google Scholar
4. 4. Assadi, A., Bouzaza, A., Wolbert, D., Petit, P., 2014. Isovaleraldehyde elimination by UV/TiO2 photocatalysis: comparative study of the process at different reactors configurations and scales. Environmental Science and Pollution Research 21, 11178–11188.10.1007/s11356-014-2603-7Search in Google Scholar PubMed
5. 5. Bansal, S., Kushwaha, J.P., Sangal, V.K., 2013. Electrochemical treatment of reactive black 5 textile wastewater: optimization, kinetics, and disposal study. Water Environment Research 85, 2294–2306.10.2175/106143013X13807328848414Search in Google Scholar PubMed
6. 6. Collazzo, G.C., Foletto, E.L., Jahn, S.L., Villetti, M.A., 2012. Degradation of direct black 38 dye under visible light and sunlight irradiation by N-doped anatase TIO2 as photocatalyst. Journal of Environmental Management 98, 107–111.10.1016/j.jenvman.2011.12.029Search in Google Scholar PubMed
7. 7. Dostanić, J.M., Lončarević, D.R., Banković, P.T., Cvetković, O.G., Jovanović, D.M., Mijin, D.Ž., 2011. Influence of process parameters on the photodegradation of synthesized azo pyridone dye in TiO2 water suspension under simulated sunlight. Journal of Environmental Science and Health, Part A 46, 70–79.10.1080/10934529.2011.526905Search in Google Scholar PubMed
8. 8. Dutta, S., Parsons, S.A., Bhattacharjee, C., Bandhyopadhyay, S., Datta, S., 2010. Development of an artificial neural network model for adsorption and photocatalysis of reactive dye on TiO2 surface. Expert Systems with Applications 37, 8634–8638.10.1016/j.eswa.2010.06.090Search in Google Scholar
9. 9. Fernández, C., Larrechi, M.S., Callao, M.P., 2009. Study of the influential factors in the simultaneous photocatalytic degradation process of three textile dyes. Talanta 79, 1292–1297.10.1016/j.talanta.2009.05.045Search in Google Scholar PubMed
10. 10. Ghafari, S., Aziz, H.A., Isa, M.H., Zinatizadeh, A.A., 2009. Application of response surface methodology (RSM) to optimize coagulation–flocculation treatment of leachate using Poly-Aluminum Chloride (PAC) and alum. Journal of Hazardous Materials 163, 650–656.10.1016/j.jhazmat.2008.07.090Search in Google Scholar PubMed
11. 11. Guin, J.P., Bhardwaj, Y.K., Naik, D.B., Varshney, L., 2014. Evaluation of efficiencies of radiolysis, photocatalysis and ozonolysis of modified simulated textile dye waste-water. RSC Advances 4, 53921–53926.10.1039/C4RA10304ASearch in Google Scholar
12. 12. Gözmen, B., Turabik, M., Hesenov, A., 2009. Photocatalytic degradation of basic red 46 and basic yellow 28 in single and binary mixture by UV/TiO2/periodate system. Journal of Hazardous Materials 164, 1487–1495.10.1016/j.jhazmat.2008.09.075Search in Google Scholar
13. 13. Juang, R.S., Lin, S.H., Hsueh, P.Y., 2010. Removal of binary azo dyes from water by UV-irradiated degradation in TiO2 suspensions. Journal of Hazardous Materials 182, 820–826.10.1016/j.jhazmat.2010.06.113Search in Google Scholar
14. 14. Karatas, M., Argun, Y.A., Argun, M.E., 2012. Decolorization of antraquinonic dye, reactive blue 114 from synthetic wastewater by Fenton process: kinetics and thermodynamics. Journal of Industrial and Engineering Chemistry 18, 1058–1062.10.1016/j.jiec.2011.12.007Search in Google Scholar
15. 15. Kaur, P., Sangal, V. K., Kushwaha, J.P., 2015. Modeling and evaluation of electro-oxidation of dye wastewater using artificial neural networks. RSC Advances 5, 34663–34671.10.1039/C4RA14160ASearch in Google Scholar
16. 16. Lee, J.M., Moon-Sun, K., Byungho, H., Wookeun, B., Byung-Woo, K., 2003. Photodegradation of acid red 114 dissolved using a photo-Fenton process with TiO2. Dyes and Pigments 56, 59–67.10.1016/S0143-7208(02)00112-2Search in Google Scholar
17. 17. Mehta, P., Mehta, R., Surana, M., Kabra, B.V., 2011. Influence of operational parameters on degradation of commercial textile azo dye acid blue 113 (Cyanine 5r) by advanced oxidation technology. Journal of Current Chemical & Pharmceutical Sciences 1, 28–36.Search in Google Scholar
18. 18. Muruganandham, M., Sobana, N., Swaminathan, M., 2006. Solar assisted photocatalytic and photochemical degradation of reactive black 5. Journal of Hazardous Materials 137, 1371–1376.10.1016/j.jhazmat.2006.03.030Search in Google Scholar
19. 19. Wang N., Li, J., Zhu, L., Dong, Y., Tang, H., 2008. Highly photocatalytic activity of metallic hydroxide/titanium dioxide nanoparticles prepared via a modified wet precipitation process. Journal of Photochemistry and Photobiology A: Chemistry 198, 282–287.10.1016/j.jphotochem.2008.03.021Search in Google Scholar
20. 20. Nikazar, M., Khodayar, G., Kazem, M., 2008. Photocatalytic degradation of azo dye acid red 114 in water with TiO2 supported on clinoptilolite as a catalyst. Desalination 219, 293–300.10.1016/j.desal.2007.02.035Search in Google Scholar
21. 21. Pareek, V.K., Brungs, M.P., Adesina, A.A., Sharma, R., 2002. Artificial neural network modeling of a multiphase photodegradation system. Journal of Photochemistry and Photobiology A: Chemistry 149, 139–146.10.1016/S1010-6030(01)00640-2Search in Google Scholar
22. 22. Saien, J., Soleymani, A.R., Bayat, H., 2012. Modeling Fentonic advanced oxidation process decolorization of direct red 16 using artificial neural network technique. Desalination and Water Treatment 40, 174–182.10.5004/dwt.2012.2847Search in Google Scholar
23. 23. Salari, D., Niaei, A., Khataee, A., Zarei, M., 2009. Electrochemical treatment of dye solution containing C.I. basic yellow 2 by the peroxi-coagulation method and modeling of experimental results by artificial neural networks. Journal of Electroanalytical Chemistry 629, 117–125.10.1016/j.jelechem.2009.02.002Search in Google Scholar
24. 24. Sangal, V.K., Kumar, V., Mishra, I.M., 2012. Optimization of structural and operational variables for the energy efficiency of a divided wall distillation column. Computers & Chemical Engineering 40, 33–40.10.1016/j.compchemeng.2012.01.015Search in Google Scholar
25. 25. Sangal, V.K., Kumar, V., Mishra, I.M., 2013. Optimization of a divided wall column for the separation of C4-C6 normal paraffin mixture using box-Behnken design. Chemical Industry and Chemical Engineering Quarterly 19, 107–119.10.2298/CICEQ121019047SSearch in Google Scholar
26. 26. Sangal, V.K., Kumar, V., Mishra, I.M., 2014. Process parametric optimization of a divided wall distillation column. Chemical Engineering Communications 201, 72–87.10.1080/00986445.2012.762625Search in Google Scholar
27. 27. Sharma, S.K., Bhunia, H., Bajpai, P.K., 2012a. Photocatalytic decolorization kinetics and adsorption isotherms of a mixture of two anionic azo dyes: reactive red 120 and reactive black 5. Desalination and Water Treatment 44, 261–268.10.1080/19443994.2012.691751Search in Google Scholar
28. 28. Sharma, S.K., Bhunia, H., Bajpai, P.K., 2012b. Photocatalytic decolorization kinetics and mineralization of reactive black 5 aqueous solution by UV/TiO2 nanoparticles. CLEAN – Soil, Air, Water 40, 1290–1296.10.1002/clen.201100557Search in Google Scholar
29. 29. Singh, P., Dhir, A., Sangal, V.K., 2014. Optimization of photocatalytic process parameters for the degradation of acrylonitrile using box Behnken design. Desalination and Water Treatment 55, 1501–1508.10.1080/19443994.2014.929032Search in Google Scholar
30. 30. Soleymani, A.R., Saien, J., Bayat, H., 2011. Artificial neural networks developed for prediction of dye decolorization efficiency with UV/K2S2O8 process. Chemical Engineering Journal 170, 29–35.10.1016/j.cej.2011.03.021Search in Google Scholar
31. 31. Thangaraj, P., Viswanathan, M.R., Balasubramanian, K., Panneerselvam, S., Mansilla, H.D., Gracia-Pinilla, M.A., Contreras, D., Ruiz, J., 2015. Morphology controlled synthesis of Sm doped ZnO nanostructures for photodegradation studies of acid blue 113 under UV-a light. Journal of Materials Science: Materials in Electronics 26, 8784–8792.10.1007/s10854-015-3558-2Search in Google Scholar
32. 32. Vaez, M., Zarringhalam Moghaddam A., Alijani, S., 2012. Optimization and modeling of photocatalytic degradation of Azo dye using a response surface methodology (RSM) based on the central composite design with immobilized Titania nanoparticles. Industrial & Engineering Chemistry Research 51, 4199–4207.10.1021/ie202809wSearch in Google Scholar
33. 33. Zielińska, B., Grzechulska, J., Grzmil, B., Morawski, A.W., 2001. Photocatalytic degradation of reactive black 5: A comparison between TiO2-Tytanpol A11 and TiO2-Degussa P25 photocatalysts. Applied Catalysis B: Environmental 35, L1–L7.10.1016/S0926-3373(01)00230-2Search in Google Scholar
© 2017 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Articles
- Genetic Programming based Drag Model with Improved Prediction Accuracy for Fluidization Systems
- Catalytic Photodegradation of Rhodamine B in the Presence of Natural Iron Oxide and Oxalic Acid under Artificial and Sunlight Radiation
- Esterification of Lauric Acid with Glycerol in the Presence of STA/MCM-41 Catalysts
- Existence of Synergistic Effects During Co-pyrolysis of Petroleum Coke and Wood Pellet
- Photocatalytic Treatment of Binary Mixture of Dyes using UV/TiO2 Process: Calibration, Modeling, Optimization and Mineralization Study
- Aqueous Phase Biosorption of Pb(II), Cu(II), and Cd(II) onto Cabbage Leaves Powder
- Design and Simulation of a Chaotic Micromixer with Diamond-Like Micropillar Based on Artificial Neural Network
- Experimentally Validated CFD Model for Gas-Liquid Flow in a Round-Bottom Stirred Tank Equipped with Rushton Turbine
- Pyrolysis Products Characterization and Dynamic Behaviors of Hydrothermally Treated Lignite
- Pd/ZrO2: An Efficient Catalyst for Liquid Phase Oxidation of Toluene in Solvent Free Conditions
- Micro-reactor for Non-catalyzed Esterification Reaction: Performance and Modeling
- Mathematical Modeling of Carbon Nanotubes Formation in Fluidized Bed Chemical Vapor Deposition
- Electrogeneration of Active Chlorine in a Filter-Press-Type Reactor Using a New Sb2O5 Doped Ti/RuO2-ZrO2 Electrode: Indirect Indigoid Dye Oxidation
- Adsorptive Removal of As(III) from Aqueous Solution by Raw Coconut Husk and Iron Impregnated Coconut Husk: Kinetics and Equilibrium Analyses
- Synthesis and Optical Properties of Sb-Doped CdS Photocatalysts and Their Use in Methylene Blue (MB) Degradation
Articles in the same Issue
- Articles
- Genetic Programming based Drag Model with Improved Prediction Accuracy for Fluidization Systems
- Catalytic Photodegradation of Rhodamine B in the Presence of Natural Iron Oxide and Oxalic Acid under Artificial and Sunlight Radiation
- Esterification of Lauric Acid with Glycerol in the Presence of STA/MCM-41 Catalysts
- Existence of Synergistic Effects During Co-pyrolysis of Petroleum Coke and Wood Pellet
- Photocatalytic Treatment of Binary Mixture of Dyes using UV/TiO2 Process: Calibration, Modeling, Optimization and Mineralization Study
- Aqueous Phase Biosorption of Pb(II), Cu(II), and Cd(II) onto Cabbage Leaves Powder
- Design and Simulation of a Chaotic Micromixer with Diamond-Like Micropillar Based on Artificial Neural Network
- Experimentally Validated CFD Model for Gas-Liquid Flow in a Round-Bottom Stirred Tank Equipped with Rushton Turbine
- Pyrolysis Products Characterization and Dynamic Behaviors of Hydrothermally Treated Lignite
- Pd/ZrO2: An Efficient Catalyst for Liquid Phase Oxidation of Toluene in Solvent Free Conditions
- Micro-reactor for Non-catalyzed Esterification Reaction: Performance and Modeling
- Mathematical Modeling of Carbon Nanotubes Formation in Fluidized Bed Chemical Vapor Deposition
- Electrogeneration of Active Chlorine in a Filter-Press-Type Reactor Using a New Sb2O5 Doped Ti/RuO2-ZrO2 Electrode: Indirect Indigoid Dye Oxidation
- Adsorptive Removal of As(III) from Aqueous Solution by Raw Coconut Husk and Iron Impregnated Coconut Husk: Kinetics and Equilibrium Analyses
- Synthesis and Optical Properties of Sb-Doped CdS Photocatalysts and Their Use in Methylene Blue (MB) Degradation