Article
Open Access
Effect of HIP Temperature on Microstructure and Creep Property of FGH95 Alloy
-
Jun Xie
and
Xiao-Ming Zhou
Published/Copyright:
February 9, 2012
Received: 2011-06-19
Accepted: 2011-09-19
Published Online: 2012-02-9
Published in Print: 2012-February
©2012 by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Prelims
- Editorial
- Contribution to Kinetics of Superplastic Deformation of Dispersion Strengthened Al-Al4C3 System
- New Poly(amide-imide)/Nanocomposites Reinforced Silicate Nanoparticles Based on N-pyromellitimido-L-phenyl Alanine Containing Ether Moieties
- Wear Characteristics of Sintered Cermets
- Characterization of Alloys and Liquidus Projections of Ternary Bi-Sb-Sn system
- Influence of Processing Route and Section Size on Elevated Temperature Tensile Properties of 9Cr-1Mo Ferritic Steel
- A Modified Johnson–Cook Model to Predict Stress-strain Curves of Boron Steel Sheets at Elevated and Cooling Temperatures
- Effects of Nano Powder Synthesis Methods, Shaping and Sintering Conditions on Microstructure and Oxygen Permeation of La0.6Sr0.4Co0.2Fe0.8O3-Δ (LSCF) Perovskite-type Membranes
- Effect of HIP Temperature on Microstructure and Creep Property of FGH95 Alloy
- Processing and Characterization 43Ni-14Cr Nickel-Iron Base Superalloy
- Kinetics and Mechanism of Phosphorus Removal from Silicon in Vacuum Induction Refining
- Effect of Grain Size on Oxidation Behavior of Fe-40Ni-15Cr Alloys
- Oxidation of Fe-Ni Alloys in Air at 700°C, 800°C and 950°C
Keywords for this article
FGH95 superalloy;
HIP treatment;
microstructure;
creep properties;
deformation mechanism
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- Prelims
- Editorial
- Contribution to Kinetics of Superplastic Deformation of Dispersion Strengthened Al-Al4C3 System
- New Poly(amide-imide)/Nanocomposites Reinforced Silicate Nanoparticles Based on N-pyromellitimido-L-phenyl Alanine Containing Ether Moieties
- Wear Characteristics of Sintered Cermets
- Characterization of Alloys and Liquidus Projections of Ternary Bi-Sb-Sn system
- Influence of Processing Route and Section Size on Elevated Temperature Tensile Properties of 9Cr-1Mo Ferritic Steel
- A Modified Johnson–Cook Model to Predict Stress-strain Curves of Boron Steel Sheets at Elevated and Cooling Temperatures
- Effects of Nano Powder Synthesis Methods, Shaping and Sintering Conditions on Microstructure and Oxygen Permeation of La0.6Sr0.4Co0.2Fe0.8O3-Δ (LSCF) Perovskite-type Membranes
- Effect of HIP Temperature on Microstructure and Creep Property of FGH95 Alloy
- Processing and Characterization 43Ni-14Cr Nickel-Iron Base Superalloy
- Kinetics and Mechanism of Phosphorus Removal from Silicon in Vacuum Induction Refining
- Effect of Grain Size on Oxidation Behavior of Fe-40Ni-15Cr Alloys
- Oxidation of Fe-Ni Alloys in Air at 700°C, 800°C and 950°C
