Article Open Access

Hot-dip Aluminizing Fabrication of TiAl3 Coating on TA15 Alloy and Its High Temperature Oxidation Behaviors

  • , , , and
Published/Copyright: February 11, 2011
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 30 Issue 6

Published Online: 2011-02-11
Published in Print: 2011-12

©2012 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. Prelims
  2. Hot-dip Aluminizing Fabrication of TiAl3 Coating on TA15 Alloy and Its High Temperature Oxidation Behaviors
  3. Micro-laminated ZrO2/Al2O3 Interlayer Used with Fiber-reinforced Thermal Barrier Coatings on Ni-based Superalloy
  4. Influence of Reheating Conditions on Austenite Grain Growth
  5. Microstructure, Texture and Thermal Cycling Performance of EB-PVD TBCs Deposited under Different Processing Conditions
  6. Effect of Prior Cold Work on Tensile Flow and Work Hardening Behavior of a Titanium Bearing Modified Austenitic Stainless Steel
  7. Synthesis and Preparation of New Reinforced Montmorillonite Poly(amides-imides) Based on N-trimellitimido-4-amino Benzoic Acid
  8. Preparation and Properties of New Poly(amide-imide)/ Layered Silicate Nanocomposites Containing Chiral N-Trimellitylimido-L-Valine and Diphenyl Sulfone Moiety
  9. High Temperature Enthalpy Measurement of SUS340 Stainless Steel
  10. Tribological Characteristics of Micro- and Nano-Composites Cu-Al2O3 at Room and Elevated Temperatures
  11. Loading and Responses of Austenitic Stainless Steels at Elevated Temperatures
  12. Thermodynamics Analysis for the Zinc Ferrite Reduction by Hydrogen
  13. ZiSiO4 Precursor in ZrO2-SiO2 Dried Gel Inferred from the Pair Distribution Function Analysis Data
  14. Mechanical Properties and Recovery of AA 2618 Aluminum Alloy
https://doi.org/10.1515/htmp.2011.108
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Prelims
  2. Hot-dip Aluminizing Fabrication of TiAl3 Coating on TA15 Alloy and Its High Temperature Oxidation Behaviors
  3. Micro-laminated ZrO2/Al2O3 Interlayer Used with Fiber-reinforced Thermal Barrier Coatings on Ni-based Superalloy
  4. Influence of Reheating Conditions on Austenite Grain Growth
  5. Microstructure, Texture and Thermal Cycling Performance of EB-PVD TBCs Deposited under Different Processing Conditions
  6. Effect of Prior Cold Work on Tensile Flow and Work Hardening Behavior of a Titanium Bearing Modified Austenitic Stainless Steel
  7. Synthesis and Preparation of New Reinforced Montmorillonite Poly(amides-imides) Based on N-trimellitimido-4-amino Benzoic Acid
  8. Preparation and Properties of New Poly(amide-imide)/ Layered Silicate Nanocomposites Containing Chiral N-Trimellitylimido-L-Valine and Diphenyl Sulfone Moiety
  9. High Temperature Enthalpy Measurement of SUS340 Stainless Steel
  10. Tribological Characteristics of Micro- and Nano-Composites Cu-Al2O3 at Room and Elevated Temperatures
  11. Loading and Responses of Austenitic Stainless Steels at Elevated Temperatures
  12. Thermodynamics Analysis for the Zinc Ferrite Reduction by Hydrogen
  13. ZiSiO4 Precursor in ZrO2-SiO2 Dried Gel Inferred from the Pair Distribution Function Analysis Data
  14. Mechanical Properties and Recovery of AA 2618 Aluminum Alloy
Downloaded on 12.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/htmp.2011.108/html
Scroll to top button