Article
Publicly Available
Frontmatter
Published/Copyright:
July 20, 2017
Published Online: 2017-7-20
Published in Print: 2017-7-19
© 2017 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Research Articles
- Experimental Study on Application of Boron Mud Secondary Resource to Oxidized Pellets Production
- A Study at the Workability of Ultra-High Strength Steel Sheet by Processing Maps on the Basis of DMM
- Oxidation Behavior of TiAl-Based Alloy Modified by Double-Glow Plasma Surface Alloying with Cr–Mo
- Transient Liquid Phase Bonding of Nickel-Base Single Crystal Alloy with a Novel Ni-Cr-Co-Mo-W-Ta-Re-B Amorphous Interlayer
- Effects of Mn and Al on the Intragranular Acicular Ferrite Formation in Rare Earth Treated C–Mn Steel
- Effect of Plate Thickness on Tensile Property of Ti–6Al–4V Alloy Joint Friction Stir Welded Below β-Transus Temperature
- Characterization of High Temperature Deformation Behavior of BFe10-1-2 Cupronickel Alloy Using Orthogonal Analysis
- Influence of Ni Additions on the Viscosity of Liquid Al2Cu
- Corrosion Process of Stainless Steel 441 with Heated Steam at 1,000 °C
- Influence of Ti on the Hot Ductility of High-manganese Austenitic Steels
- Effect of Temperature Field on Formation of Friction Stir Welding Joints of Ti–6Al–4V Titanium Alloy
- Influence of Secondary Cooling Mode on Solidification Structure and Macro-segregation Behavior for High-carbon Continuous Casting Bloom
Articles in the same Issue
- Frontmatter
- Research Articles
- Experimental Study on Application of Boron Mud Secondary Resource to Oxidized Pellets Production
- A Study at the Workability of Ultra-High Strength Steel Sheet by Processing Maps on the Basis of DMM
- Oxidation Behavior of TiAl-Based Alloy Modified by Double-Glow Plasma Surface Alloying with Cr–Mo
- Transient Liquid Phase Bonding of Nickel-Base Single Crystal Alloy with a Novel Ni-Cr-Co-Mo-W-Ta-Re-B Amorphous Interlayer
- Effects of Mn and Al on the Intragranular Acicular Ferrite Formation in Rare Earth Treated C–Mn Steel
- Effect of Plate Thickness on Tensile Property of Ti–6Al–4V Alloy Joint Friction Stir Welded Below β-Transus Temperature
- Characterization of High Temperature Deformation Behavior of BFe10-1-2 Cupronickel Alloy Using Orthogonal Analysis
- Influence of Ni Additions on the Viscosity of Liquid Al2Cu
- Corrosion Process of Stainless Steel 441 with Heated Steam at 1,000 °C
- Influence of Ti on the Hot Ductility of High-manganese Austenitic Steels
- Effect of Temperature Field on Formation of Friction Stir Welding Joints of Ti–6Al–4V Titanium Alloy
- Influence of Secondary Cooling Mode on Solidification Structure and Macro-segregation Behavior for High-carbon Continuous Casting Bloom
