Skip to main content
Article Open Access

The Cyclic Carburization Process by Bi-velocity Method

  • EMAIL logo , , and
Published/Copyright: August 6, 2014
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 34 Issue 4

Received: 2014-4-10
Accepted: 2014-6-16
Published Online: 2014-8-6
Published in Print: 2015-7-1

©2015 by De Gruyter

Articles in the same Issue

  1. Frontmatter
  3. Microstructure and Creep Behavior of a Directional Solidification Nickel-based Superalloy
  4. Arc-sprayed Coatings for High Temperature Reactors in Titanium Sponge Process
  5. Creep Behaviour and Fracture Analysis of MoSi2 Based Composites
  6. Characterization of Monodispersed γ-Al2O3 Particles, Synthesized by Homogeneous Precipitation under Reflux Boiling
  7. Effect of Temperature on Damage Evolution of Cr25Ni35Nb Alloy Subjected to Combined Mechanical and Environmental Degradation
  8. Preparation and Electrical Characterization of Poly(Aniline) NanoClay Composites
  9. Microstructure and Shear Strength in Brazing Joint of Mo-Cu Composite with 304 Stainless Steel by Ni-Cr-P Filler Metal
  10. Thermocline Storage Filled with Structured Ceramics. Numerical Consistency of the Developed Numerical Model and First Observations
  11. Thickness Optimization for Petroleum Coke in Microwave Dehydrating Based on the Analysis of Dynamic Absorption Efficiency
  12. The Cyclic Carburization Process by Bi-velocity Method
  13. Electrochemical Performance of LiNi0.5Mn1.5O4 by Sol-gel Self-combustion Reaction Method in Different Kinds of Electrolyte for High-voltage Rechargeable Lithium Cells
  14. Finite Element Simulations on Erosion and Crack Propagation in Thermal Barrier Coatings
  15. Tensile Behavior of Long-term Aged Nickel-base Superalloy
https://doi.org/10.1515/htmp-2014-0062
Keywords for this article
external flux; cycles construction; self stress; diffusion; carburization process
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Frontmatter
  3. Microstructure and Creep Behavior of a Directional Solidification Nickel-based Superalloy
  4. Arc-sprayed Coatings for High Temperature Reactors in Titanium Sponge Process
  5. Creep Behaviour and Fracture Analysis of MoSi2 Based Composites
  6. Characterization of Monodispersed γ-Al2O3 Particles, Synthesized by Homogeneous Precipitation under Reflux Boiling
  7. Effect of Temperature on Damage Evolution of Cr25Ni35Nb Alloy Subjected to Combined Mechanical and Environmental Degradation
  8. Preparation and Electrical Characterization of Poly(Aniline) NanoClay Composites
  9. Microstructure and Shear Strength in Brazing Joint of Mo-Cu Composite with 304 Stainless Steel by Ni-Cr-P Filler Metal
  10. Thermocline Storage Filled with Structured Ceramics. Numerical Consistency of the Developed Numerical Model and First Observations
  11. Thickness Optimization for Petroleum Coke in Microwave Dehydrating Based on the Analysis of Dynamic Absorption Efficiency
  12. The Cyclic Carburization Process by Bi-velocity Method
  13. Electrochemical Performance of LiNi0.5Mn1.5O4 by Sol-gel Self-combustion Reaction Method in Different Kinds of Electrolyte for High-voltage Rechargeable Lithium Cells
  14. Finite Element Simulations on Erosion and Crack Propagation in Thermal Barrier Coatings
  15. Tensile Behavior of Long-term Aged Nickel-base Superalloy
Downloaded on 3.5.2026 from https://www.degruyterbrill.com/document/doi/10.1515/htmp-2014-0062/html?lang=en
Scroll to top button