Hot Corrosion Behaviour of Inconel 617 in Mixed Salt Environment at 900 and 1000 °C for Gas Turbine Applications

Articles in the same Issue

1. Frontmatter
3. In Memory of Professor Stanislaw Mrowec
4. Effects of Multi-electromagnetic Field on the Solidification Structure of IN100 Superalloy Castings
5. Microstructures and Creep Properties of Mg-2.5Zn-xCe (x = 4, 6 and 8 mass%) Alloys
6. Hot Corrosion Behaviour of Inconel 617 in Mixed Salt Environment at 900 and 1000 °C for Gas Turbine Applications
7. Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall based on 3D Finite Element Simulation
8. Production of Chromium Oxide from Turkish Chromite Concentrate Using Ethanol
9. Nitrogen Configuration of Polybenzoxazine Carbide
10. Effect of Manganese Sulphide Size on the Precipitation of Tin Heterogeneous Nucleation in as-Cast Steel
11. The Surface Morphology and Optical Properties of Refined Glasses with Inorganic Nano-molecules
12. Recovery Behavior of Separating Britholite (Ca₃Ce₂[(Si,P)O₄]₃F) Phase from Rare-Earth-rich Slag by Centrifugal Casting
13. Comparison of Heat Treatments on the Toughness of 1.7Ni-1.5Cu-0.5Mo Pre-alloyed P/M Steels
14. Production of Al-Co-Ni Ternary Alloys by the SHS Method for Use in Nickel Based Superalloys Manufacturing
15. Surface and Electrical Properties of Electro-Coagulated Thermal Waste
16. Dechlorination of Zinc Oxide Dust from Waelz Kiln by Microwave Roasting