Article
Open Access
Effect of Tin on Hot Ductility and High-temperature Oxidation Behavior of 20CrMnTi Steel
-
Hong-bing Peng
,
Wei-qing Chen
Published/Copyright:
September 18, 2013
Received: 2013-3-13
Accepted: 2013-7-27
Published Online: 2013-9-18
Published in Print: 2014-4-1
©2014 by Walter de Gruyter Berlin/Boston
Articles in the same Issue
- Frontmatter
- Reduction of FeO in EAF Steelmaking Slag by Blends of Metallurgical Coke and Waste Polypropylene
- Effects of Lanthanum and Boron on the Microstructure and Magnetic Properties of Non-oriented Electrical Steels
- Effect of Reductants on Valuable Metals Separation and Recovery from Copper Cliff Converter Slag
- Microstructure and Tensile Deformation Features of Tandem Hot Rolling GH4169 Superalloy
- Intergranular Corrosion Susceptibility of Alloy 600 after Autogenous Tungsten Inert Gas and Laser Beam Welding using Electrochemical Technique
- Surface Modification of Polyetheretherketone by Helium/nitrogen and Nitrous Oxide Plasma Enhanced Chemical Vapour Deposition
- Optimization on Response Surface Methodology for Preparing V2O5 from Industrial Ammonium Metavanadate
- Investigation of Microstructure and Mechanical Properties of Friction Welded Aisi 316 and Ck 45 Steels
- Solid-fuel Rocket Engines: Layered Composite Materials Manufacturing and Thermal Diffusivity Measurements
- Effect of Tin on Hot Ductility and High-temperature Oxidation Behavior of 20CrMnTi Steel
- Solubility of Bismuth in Liquid Bi-S Based Free Cutting Steel
Keywords for this article
tin;
20CrMnTi steel;
copper cliff;
hot ductility;
high-temperature oxidation behavior
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- Frontmatter
- Reduction of FeO in EAF Steelmaking Slag by Blends of Metallurgical Coke and Waste Polypropylene
- Effects of Lanthanum and Boron on the Microstructure and Magnetic Properties of Non-oriented Electrical Steels
- Effect of Reductants on Valuable Metals Separation and Recovery from Copper Cliff Converter Slag
- Microstructure and Tensile Deformation Features of Tandem Hot Rolling GH4169 Superalloy
- Intergranular Corrosion Susceptibility of Alloy 600 after Autogenous Tungsten Inert Gas and Laser Beam Welding using Electrochemical Technique
- Surface Modification of Polyetheretherketone by Helium/nitrogen and Nitrous Oxide Plasma Enhanced Chemical Vapour Deposition
- Optimization on Response Surface Methodology for Preparing V2O5 from Industrial Ammonium Metavanadate
- Investigation of Microstructure and Mechanical Properties of Friction Welded Aisi 316 and Ck 45 Steels
- Solid-fuel Rocket Engines: Layered Composite Materials Manufacturing and Thermal Diffusivity Measurements
- Effect of Tin on Hot Ductility and High-temperature Oxidation Behavior of 20CrMnTi Steel
- Solubility of Bismuth in Liquid Bi-S Based Free Cutting Steel
