Skip to main content
Article Open Access

Pressure Dependence of the Thermodynamic Quantities in Phase II of Solid Benzene

  • EMAIL logo and
Published/Copyright: April 30, 2013
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 32 Issue 5

Received: 2012-11-07
Accepted: 2013-02-15
Published Online: 2013-04-30
Published in Print: 2013-10-25

©[2013] by Walter de Gruyter Berlin Boston

Articles in the same Issue

  1. Masthead
  2. Pressure Dependence of the Thermodynamic Quantities in Phase II of Solid Benzene
  3. Temperature Dependencies of the Permittivities and Microwave Shielding Effectiveness of a Carbon-containing Electrically Conductive Concrete
  4. Tribological Characteristics of Copper Based Composites with Al2O3 Particles at Various Temperatures
  5. Electrochemical Impedance Spectroscopy Studies of Corrosion of Two-phase Ni-Dy Alloys in Molten (0.62Li,0.38K)2CO3 at 650 °C
  6. High Temperature and Organosoluble Poly(amide-imide)s Based on 1,4-Bis[4-aminophenoxy]butane and Aromatic Diacids by Direct Polycondensation: Synthesis and Properties
  7. Effect of Ultrasonic Melt Treatment on Solidification Structure of Fe-36Ni Invar Alloy
  8. Response of the Cr-alloyed PM Steels on Vacuum Sintering and Heat Treatment
  9. On the Dynamic Strain Aging Effects during Elevated Temperature Ratcheting of Type 316LN Stainless Steel
  10. Carbothermic Reduction of Zinc Ferrite by Microwave Heating
  11. A Study of Hot Corrosion of Fe-Cr Alloys Induced by a Thin Film of Fused (Na,K)2SO4 by Electrochemical Impedance Spectroscopy
  12. Removal of Impurities from Metallurgical Grade Silicon by Liquation Refining Method
  13. Effect of Surfactant on the Preparation of Nano-powder for Yb Doping Laser Transparent YAG Ceramic
https://doi.org/10.1515/htmp-2012-0162
Keywords for this article
thermodynamics quantities; Pippard relations; solid phase II; benzene
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Masthead
  2. Pressure Dependence of the Thermodynamic Quantities in Phase II of Solid Benzene
  3. Temperature Dependencies of the Permittivities and Microwave Shielding Effectiveness of a Carbon-containing Electrically Conductive Concrete
  4. Tribological Characteristics of Copper Based Composites with Al2O3 Particles at Various Temperatures
  5. Electrochemical Impedance Spectroscopy Studies of Corrosion of Two-phase Ni-Dy Alloys in Molten (0.62Li,0.38K)2CO3 at 650 °C
  6. High Temperature and Organosoluble Poly(amide-imide)s Based on 1,4-Bis[4-aminophenoxy]butane and Aromatic Diacids by Direct Polycondensation: Synthesis and Properties
  7. Effect of Ultrasonic Melt Treatment on Solidification Structure of Fe-36Ni Invar Alloy
  8. Response of the Cr-alloyed PM Steels on Vacuum Sintering and Heat Treatment
  9. On the Dynamic Strain Aging Effects during Elevated Temperature Ratcheting of Type 316LN Stainless Steel
  10. Carbothermic Reduction of Zinc Ferrite by Microwave Heating
  11. A Study of Hot Corrosion of Fe-Cr Alloys Induced by a Thin Film of Fused (Na,K)2SO4 by Electrochemical Impedance Spectroscopy
  12. Removal of Impurities from Metallurgical Grade Silicon by Liquation Refining Method
  13. Effect of Surfactant on the Preparation of Nano-powder for Yb Doping Laser Transparent YAG Ceramic
Downloaded on 28.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/htmp-2012-0162/html?lang=en
Scroll to top button