Extracting Aluminum from Aluminum Alloys in AlCl3-NaCl Molten Salts

Junli Xu; Jing Zhang; Zhongning Shi

doi:10.1515/htmp-2012-0152

Home Extracting Aluminum from Aluminum Alloys in AlCl3-NaCl Molten Salts

Article Open Access

Extracting Aluminum from Aluminum Alloys in AlCl₃-NaCl Molten Salts

Junli Xu , Jing Zhang and Zhongning Shi

Published/Copyright: December 19, 2012

Download Article (PDF)

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal High Temperature Materials and Processes Volume 32 Issue 4

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Xu, Junli, Zhang, Jing and Shi, Zhongning. "Extracting Aluminum from Aluminum Alloys in AlCl₃-NaCl Molten Salts" High Temperature Materials and Processes, vol. 32, no. 4, 2013, pp. 367-373. https://doi.org/10.1515/htmp-2012-0152

Xu, J., Zhang, J. & Shi, Z. (2013). Extracting Aluminum from Aluminum Alloys in AlCl₃-NaCl Molten Salts. High Temperature Materials and Processes, 32(4), 367-373. https://doi.org/10.1515/htmp-2012-0152

Xu, J., Zhang, J. and Shi, Z. (2013) Extracting Aluminum from Aluminum Alloys in AlCl₃-NaCl Molten Salts. High Temperature Materials and Processes, Vol. 32 (Issue 4), pp. 367-373. https://doi.org/10.1515/htmp-2012-0152

Xu, Junli, Zhang, Jing and Shi, Zhongning. "Extracting Aluminum from Aluminum Alloys in AlCl₃-NaCl Molten Salts" High Temperature Materials and Processes 32, no. 4 (2013): 367-373. https://doi.org/10.1515/htmp-2012-0152

Xu J, Zhang J, Shi Z. Extracting Aluminum from Aluminum Alloys in AlCl₃-NaCl Molten Salts. High Temperature Materials and Processes. 2013;32(4): 367-373. https://doi.org/10.1515/htmp-2012-0152

Copy

Copied to clipboard

BibTeX EndNote RIS

Received: 2012-10-13

Accepted: 2012-11-24

Published Online: 2012-12-19

Published in Print: 2013-08-16

Articles in the same Issue

Masthead
Thermal Fatigue Crack Initiation of Laser Deposited High-temperature Titanium Alloy Ti60A in 20–700 °C
Effects of Different Heat Treatment Conditions on Fatigue Behavior of AA7075 Alloy
Microstructure and Mechanical Property Optimization of NiTiAl-based Alloys: Directional Solidification in Novel Ceramic Crucibles
Effect of Ag on the Hot Corrosion of NiAl Intermetallic Compound
Extracting Aluminum from Aluminum Alloys in AlCl₃-NaCl Molten Salts
Effect of Two Kinds of Refiners on the Solidification Structure and Property of Invar Alloy
Analysis of the Raman Frequency Shifts for the Lattice Modes and Vibrons Related to the Thermodynamic Quantities in the η Phase of Solid Nitrogen
Synthesis and Characterization of Uniform Zirconia Particles by Homogeneous Precipitation Method
High-Temperature Oxidation Behavior of Cu-Si-Y Alloys
Determination of Direct Reduction Conditions of Mill Scale
Recrystalization Behavior of Coldworked 14Cr-15Ni-2Mo Austenitic Stainless Steel Under Tensile Deformation

Search journal Search the content of this journal

https://doi.org/10.1515/htmp-2012-0152

Keywords for this article

aluminum extraction; recycling; aluminum alloy; chlorides

Creative Commons

BY-NC-ND 3.0

Articles in the same Issue

Masthead
Thermal Fatigue Crack Initiation of Laser Deposited High-temperature Titanium Alloy Ti60A in 20–700 °C
Effects of Different Heat Treatment Conditions on Fatigue Behavior of AA7075 Alloy
Microstructure and Mechanical Property Optimization of NiTiAl-based Alloys: Directional Solidification in Novel Ceramic Crucibles
Effect of Ag on the Hot Corrosion of NiAl Intermetallic Compound
Extracting Aluminum from Aluminum Alloys in AlCl₃-NaCl Molten Salts
Effect of Two Kinds of Refiners on the Solidification Structure and Property of Invar Alloy
Analysis of the Raman Frequency Shifts for the Lattice Modes and Vibrons Related to the Thermodynamic Quantities in the η Phase of Solid Nitrogen
Synthesis and Characterization of Uniform Zirconia Particles by Homogeneous Precipitation Method
High-Temperature Oxidation Behavior of Cu-Si-Y Alloys
Determination of Direct Reduction Conditions of Mill Scale
Recrystalization Behavior of Coldworked 14Cr-15Ni-2Mo Austenitic Stainless Steel Under Tensile Deformation