Modification of Steelmaking Slag by Additions of Salts from Aluminum Production

Articles in the same Issue

1. Masthead
2. Preface
3. A Review of the Factors Affecting the Thermophysical Properties of Silicate Slags
4. Thermodynamic Prediction of Spinodal Decomposition in Multi-component Silicate Glass for Design of Functional Porous Glass Materials
5. Dissolution Behavior of Dicalcium Silicate and Tricalcium Phosphate Solid Solution and other Phases of Steelmaking Slag in an Aqueous Solution
6. Effective Temperature of High Pressure Torsion in Zr-Nb Alloys
7. Some Novel Studies of Thermodynamics, Kinetics and Transport Phenomena in Slags
8. Kinetics of Mechanical Alloying, Mechanical Properties of Micro and Nanostructural Al-C Systems
9. On the Defect Structure and Transport Properties of Co₃O₄ Spinel Oxide
10. Phase Development in Carbothermal Reduction and Nitridation of Ilmenite Concentrates
11. Modification of Steelmaking Slag by Additions of Salts from Aluminum Production
12. Thermodynamics of Congruent Oxidation
13. Numerical Simulation of Gas-Liquid Two-Phase Flow in a Horizontally Placed Hydrophobic Rectangular Channel (Part 1, Influence of Abrupt Expansion)
14. Numerical Simulation of Gas-Liquid Two-Phase Flow in a Horizontally Placed Hydrophobic Rectangular Channel (Part 2, Influence of Abrupt Contraction)
15. Activities of Fe_xO in Na₂O-Al₂O₃-SiO₂-Fe_xO Homogeneous Liquid Slags at 1673 K
16. Thermodynamic Properties of Solid Solutions between Di-calcium Silicate and Tri-calcium Phosphate
17. Dissolution Behavior of Calcium into Molten Steel
18. Oxygen Liberation from Stabilized Zirconia upon Changing DC Polarization Condition
19. Dissolution Characteristics and Morphology of Large-sized Scorodite Particles Synthesized from Fe(II) and As(V) in Aqueous Solution
20. Capacitance Measurement of Molten Calcium Silicate under Shear Stress Field
21. Effect of Wood Biomass Addition on the Char Making Process of Waste Plastic for Controlling the Combustion Efficiency
22. The Rate of Boron Removal from Molten Silicon by CaO-SiO₂ Slag and Cl₂ Treatment
23. Activities of FexO in Industrial Slags Used for External Removal of Phosphorous from Hot Metal
24. Recent Development in the Investigation on Thermal Conductivity of Silicate Melts
25. Advances in Transient-Liquid-Phase Bonding of Ultra-high Temperature ZrC Ceramics
26. Self-propagating High-temperature Synthesis of La_1−xSr_xMn_yFe_1−yO₃ Perovskites for Soot Combustion Catalyst
27. Hot Metal Desulphurization Using Waste Residues from the Aluminum Industry
28. Additions of Salt Cake and KAlF₄ from Aluminum Production to Steelmaking Slags
29. High Temperature Corrosion of Metallic Materials in Composed Oxidizing Environments
30. Preparation of Polycrystalline CdTe Films by Annealing of Amorphous Films Electrodeposited from Ammoniacal Alkaline Baths
31. Oxidation and Evaporation Behaviors of Cr, Cu and As During Incineration of Wood Treated by Chromated Copper Arsenate Preservative
32. Viscosity Determination of Molten Ash from Low-Grade US Coals
33. Determination of Thermal Conductivity of Mn-Al Powder Compacts using An Inverse Heat Transfer Procedure
34. Recycling of Rubber Tyres in Electric Arc Furnace Steelmaking: Carbon/Slag Reactions of Coke/Rubber Blends
35. A Thermodynamic Analysis of the Selective Sulphidation of Nickel from a Nickeliferous Lateritic Ore
36. Thermodynamic Analysis of the Sulphation Roasting of Enargite Concentrates
37. Thermodynamics of Phosphorus Removal from Silicon in Solvent Refining of Silicon
38. In-Situ Sensors for Liquid Metal Quality
39. Interfacial Phenomena in Fe-TiC Systems and the Effect of Cr and Ni
40. The Use of Thermodynamic Modeling to Examine Alkali Recirculation in the Iron Blast Furnace
41. Oxidation of Pure Solid CaS with Ar-O₂ Gas Mixture