Home Physical Sciences The Effects of the Withdrawal Rate and Heat Treatment on the Microstructure of Directionally Solidified Nb-14Si-24Ti Alloy
Article Open Access

The Effects of the Withdrawal Rate and Heat Treatment on the Microstructure of Directionally Solidified Nb-14Si-24Ti Alloy

  • Ligang Wang , Fei Ding , Sainan Yuan , Lina Jia and Hu Zhang EMAIL logo
Published/Copyright: April 17, 2013
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 32 Issue 2

Received: 2012-03-10
Accepted: 2012-03-25
Published Online: 2013-04-17
Published in Print: 2013-04-17

©[2013] by Walter de Gruyter Berlin Boston

Articles in the same Issue

  1. Masthead
  2. Electrodeposition of Solar Cell Grade Silicon in High Temperature Molten Salts
  3. Structural and Mechanical Properties of Nanostructured TiAlCrN Thin Films Deposited by Cathodic Arc Deposition
  4. The Effects of the Withdrawal Rate and Heat Treatment on the Microstructure of Directionally Solidified Nb-14Si-24Ti Alloy
  5. Effect of Silicon Content on Wear Behavior of Heat Treated Powder Metallurgy Steels
  6. Synergistic Effect between Sb2O3 Nanostructure and Brominated Compound on the Flame Retardant Properties of the Polymeric Matrixes
  7. New Phenomenological Model of Hot Mean Flow Stress
  8. Model for calculating physicochemical properties of aluminosilicate melt
  9. Influence of Calculation Method on Value of Activation Energy in Hot Forming
  10. Synthesis and Characterization of HgSe Nanostructure Using a Novel Precursor
  11. Experimental Research and Analysis of Non-alloy Structural Steel Response Exposed to High Temperature Conditions
  12. Synthesis and Characterization of New Polyimide/Organoclay Nanocomposites Derived From 3,3′,4,4′-Biphenyltetracarboxylic Dianhydride and 1,2-Bis(4-Aminophenoxy)Ethane
  13. Morphology and Dielectric Properties of Boron-doped BaTiO3
  14. Critical Behaviour of the Heat Capacity Near the α-β Phase Transition in Quartz
https://doi.org/10.1515/htmp-2012-0030
Keywords for this article
Nb-Si; directional solidification; heat treatment; microstructure
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Masthead
  2. Electrodeposition of Solar Cell Grade Silicon in High Temperature Molten Salts
  3. Structural and Mechanical Properties of Nanostructured TiAlCrN Thin Films Deposited by Cathodic Arc Deposition
  4. The Effects of the Withdrawal Rate and Heat Treatment on the Microstructure of Directionally Solidified Nb-14Si-24Ti Alloy
  5. Effect of Silicon Content on Wear Behavior of Heat Treated Powder Metallurgy Steels
  6. Synergistic Effect between Sb2O3 Nanostructure and Brominated Compound on the Flame Retardant Properties of the Polymeric Matrixes
  7. New Phenomenological Model of Hot Mean Flow Stress
  8. Model for calculating physicochemical properties of aluminosilicate melt
  9. Influence of Calculation Method on Value of Activation Energy in Hot Forming
  10. Synthesis and Characterization of HgSe Nanostructure Using a Novel Precursor
  11. Experimental Research and Analysis of Non-alloy Structural Steel Response Exposed to High Temperature Conditions
  12. Synthesis and Characterization of New Polyimide/Organoclay Nanocomposites Derived From 3,3′,4,4′-Biphenyltetracarboxylic Dianhydride and 1,2-Bis(4-Aminophenoxy)Ethane
  13. Morphology and Dielectric Properties of Boron-doped BaTiO3
  14. Critical Behaviour of the Heat Capacity Near the α-β Phase Transition in Quartz
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 12.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/htmp-2012-0030/html
Scroll to top button