Article
Licensed
Unlicensed
Requires Authentication
Decomposition of a phenolic lignin model compound over organic N-bases in an ionic liquid
-
Songyan Jia
Published/Copyright:
June 30, 2010
Abstract
Lignin depolymerization is a necessary process step in utilizing the carbohydrates in biomass and in potentially converting the lignin into a chemical feedstock. Lignin contains several aryl-alkyl ether linkages and the β-O-4 linkage is dominant among lignins. Base-mediated cleavage of the β-O-4 bond in a lignin model compound, guaiacylglycerol-β-guaiacyl ether, is reported. Ionic liquids have shown promise in a variety of biomass processes and this study explores the potential to use an ionic liquid solvent (1-butyl-2,3-dimethylimidazolium chloride) and non-aqueous bases in cleaving the β-O-4 bond. N-bases of varying basicity and structure were used at temperatures up to 150°C. The cleavage reaction was not found to be catalytic. Among all the tested N-bases, 1,5,7-triazabicyclo[4.4.0]dec-5-ene was the most active, leading to more than 40% β-O-4 ether bond cleavage, and the higher activity is probably associated with the exposed nature of the N-atoms.
Received: 2010-1-12
Accepted: 2010-3-16
Published Online: 2010-06-30
Published Online: 2010-06-30
Published in Print: 2010-08-01
©2010 by Walter de Gruyter Berlin New York
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Original papers
- Side reactions of 4-acetamido-TEMPO as the catalyst in cellulose oxidation systems
- Reactions of aldehydes with chlorous acid and chlorite in chlorine dioxide bleaching
- Using cationic polyvinyl alcohol (C-PVA) to improve the strength of wood-free papers containing high-yield pulp (HYP)
- A new phenolic glucoside and flavonoids from the bark of Eucommia ulmoides Oliv.
- Decomposition of a phenolic lignin model compound over organic N-bases in an ionic liquid
- Investigation on wax-impregnated wood. Part 1: Microscopic observations and 2D X-ray imaging of distinct wax types
- Investigation on wax-impregnated wood. Part 2: Study of void spaces filled with air by He pycnometry, Hg intrusion porosimetry, and 3D X-ray imaging
- Surface properties of eucalyptus pulp fibres as reinforcement of cement-based composites
- Cure kinetics of PF/PVAc hybrid adhesive for manufacturing profiled wood-strand composites
- Moisture induced stresses perpendicular to the grain in glulam: Review and evaluation of the relative importance of models and parameters
- Three-dimensional modeling of the structure formation and consolidation of wood composites
- Observation of cell shapes in wood cross-sections during water adsorption by confocal laser-scanning microscopy (CLSM)
- A single cell model for pretreatment of wood by microwave explosion
- Pore space analysis of beech wood: The vessel network
- Quantification of fungal colonization in modified wood: Quantitative real-time PCR as a tool for studies on Trametes versicolor
- Copper monoethanolamine adsorption in wood and its relation with cation exchange capacity (CEC)
- Effect of amine ligand, copper/amine ratio, and pH on copper adsorption into wood
- Effect of different soils and pH amendments on brown-rot decay activity in a soil block test
- A proposed accelerated field stake test for rapid assessment of wood preservative systems
- Meetings
- Meetings
Articles in the same Issue
- Original papers
- Side reactions of 4-acetamido-TEMPO as the catalyst in cellulose oxidation systems
- Reactions of aldehydes with chlorous acid and chlorite in chlorine dioxide bleaching
- Using cationic polyvinyl alcohol (C-PVA) to improve the strength of wood-free papers containing high-yield pulp (HYP)
- A new phenolic glucoside and flavonoids from the bark of Eucommia ulmoides Oliv.
- Decomposition of a phenolic lignin model compound over organic N-bases in an ionic liquid
- Investigation on wax-impregnated wood. Part 1: Microscopic observations and 2D X-ray imaging of distinct wax types
- Investigation on wax-impregnated wood. Part 2: Study of void spaces filled with air by He pycnometry, Hg intrusion porosimetry, and 3D X-ray imaging
- Surface properties of eucalyptus pulp fibres as reinforcement of cement-based composites
- Cure kinetics of PF/PVAc hybrid adhesive for manufacturing profiled wood-strand composites
- Moisture induced stresses perpendicular to the grain in glulam: Review and evaluation of the relative importance of models and parameters
- Three-dimensional modeling of the structure formation and consolidation of wood composites
- Observation of cell shapes in wood cross-sections during water adsorption by confocal laser-scanning microscopy (CLSM)
- A single cell model for pretreatment of wood by microwave explosion
- Pore space analysis of beech wood: The vessel network
- Quantification of fungal colonization in modified wood: Quantitative real-time PCR as a tool for studies on Trametes versicolor
- Copper monoethanolamine adsorption in wood and its relation with cation exchange capacity (CEC)
- Effect of amine ligand, copper/amine ratio, and pH on copper adsorption into wood
- Effect of different soils and pH amendments on brown-rot decay activity in a soil block test
- A proposed accelerated field stake test for rapid assessment of wood preservative systems
- Meetings
- Meetings
