Friction correction when predicting wood basic density using drilling resistance

References

Alexiou, P.N. (1994). Elastic properties of Eucalyptus pilularis Sm. perpendicular to the grain. II. In compression. Holzforschung-Int. J. Biol, Chem, Phy and Technol. Wood. 48: 55–60, https://doi.org/10.1515/hfsg.1994.48.1.55.Suche in Google Scholar

Balodis, V. (1981). Pulpwood quality assessment of forest resources. In: CSIRO division of chemical technology research review 1980, Australia, pp. 13–32.Suche in Google Scholar

Barria, C., Sandoval, S., and Rojas, G. (2017). Using resistography method for prediction of wood basic density in standing trees of Pinus radiata. Maderas: Ciencia y Technologia 19: 349–362, https://dx.doi.org/10.4067/S0718-221X2017005000030.10.4067/S0718-221X2017005000030Suche in Google Scholar

Bates, D., Mächler, M., Bolker, B., and Walker, S. (2015). Fitting linear mixed-effects models using lme4. J. Stat. Softw. 67: 1–48, https://doi.org/10.18637/jss.v067.i01.Suche in Google Scholar

Blackburn, D., Vega, M., and Nolan, G. (2019). Using acoustic wave velocity to select fibre-managed plantation Eucalyptus nitens logs for laminated veneer lumber products. South. For. J. For. Sci. 81: 223–234, https://doi.org/10.2989/20702620.2018.1555945.Suche in Google Scholar

Bouffier, L., Charlot, C., Raffin, A., Rozenberg, P., and Kremer, A. (2008). Can wood density be efficiently selected at early stage in maritime pine (Pinus pinaster Ait.)?. Ann. For. Sci. 65, 106–106, https://doi.org/10.1051/forest:2007078.10.1051/forest:2007078Suche in Google Scholar

Carrillo, I., Valenzuela, S., and Elissetche, J.P. (2017). Comparative evaluation of Eucalyptus globulus and E. nitens wood and fibre quality. IAWA J. 38: 105–116, https://doi.org/10.1163/22941932-20170160.Suche in Google Scholar

Chantre, G. and Rozenberg, P. (1997). Can drill resistance profiles (Resistograph) lead to within-profile and within-ring density parameters in Douglas fir wood. Proceedings of CTIA-IUFRO International wood quality workshop: timber management toward wood Quality and end-product value. Québec: Forintek Canada, pp. 41–46.Suche in Google Scholar

Costello, L.R. and Quarles, S.L. (1999). Detection of wood decay in blue gum and elm: an evaluation of the Resistograph [R] and the portable drill. J. Arboric. 25: 311–318.10.48044/jauf.1999.041Suche in Google Scholar

Downes, G. and Lausberg, M. (2016a). Evaluation of the RESI software tool for the prediction of HM200 within pine logs sourced from multiple sites across New Zealand and Australia. Rotorua: New Zealand. NZ Solid Wood Innov 1–15.Suche in Google Scholar

Downes, G.M., Drew, D.M., Moore, J., Lausberg, M., Harrington, J., Elms, S., Watt, D., and S, H. (2016b). Evaluating and modeling radiata pine wood quality in the Murray valley region. Forest and Wood Products Australia, Melbourne.Suche in Google Scholar

Downes, G., Drew, D., and Lee, D. (2020). Validated softwood stiffness predictions using IML-Resistograph and eCambium. Forest & Wood Products Australia, Melbourne, Victoria, Australia.Suche in Google Scholar

Downes, G.M., Lausberg, M., Potts, B., Pilbeam, D., Bird, M., and Bradshaw, B. (2018). Application of the IML Resistograph to the infield assessment of basic density in plantation eucalypts. Aust. For. 81: 177–185, https://doi.org/10.1080/00049158.2018.1500676.Suche in Google Scholar

Farrell, R., Innes, T.C., and Harwood, C.E. (2012). Sorting Eucalyptus nitens plantation logs using acoustic wave velocity. Aust. For. 75: 22–30, https://doi.org/10.1080/00049158.2012.10676382.Suche in Google Scholar

Fundova, I., Funda, T., and Wu, H.X. (2018). Non-destructive wood density assessment of Scots pine (Pinus sylvestris L.) using Resistograph and Pilodyn. PloS One 13: 16, https://doi.org/10.1371/journal.pone.0204518.Suche in Google Scholar

Gao, S., Wang, X., Wiemann, M.C., Brashaw, B.K., Ross, R.J., and Wang, L. (2017). A critical analysis of methods for rapid and nondestructive determination of wood density in standing trees. Ann. For. Sci. 74: 27, https://doi.org/10.1007/s13595-017-0623-4.Suche in Google Scholar

Guller, B., Guller, A., and Kazaz, G. (2012). Is Resistograph an appropriate tool for the annual ring measurement of Pinus brutia? 42 International Conference NDE Safety. Czech Society for Nondestructive Testing NDE for Safety / DEFEKTOSKOPIE 2012, Czech Republic, pp. 89–94.Suche in Google Scholar

Hartig, F. (2020). DHARMa: residual diagnostics for hierarchical (Multi-Level/Mixed) regression models. The Comprehensive R Archive Network (CRAN), R package version 0.3.2.0. https://CRAN.R-project.org/package=DHARMa.Suche in Google Scholar

Heinrichs, J.F. and Lassen, L. (1970). Improved technique for determining the volume of irregularly shaped wood blocks. For. Prod. J. 20.Suche in Google Scholar

Isik, F. and Li, B. (2003). Rapid assessment of wood density of live trees using the Resistograph for selection in tree improvement programs. Can. J. For. Res. 33: 2426–2435, https://doi.org/10.1139/x03-176.Suche in Google Scholar

Johnstone, D., Ades, P., Moore, G.M., and Smith, I.W. (2011). Using an IML-Resi drill to assess wood density in Eucalyptus globulus subsp. pseudoglobulus. Aust. For. 74: 190–196, https://doi.org/10.1080/00049158.2011.10676362.Suche in Google Scholar

Kuznetsova, A., Brockhoff, P., and Christensen, R. (2017). lmerTest package: tests in linear mixed effects models. J. Stat. Softw. 82: 1–13, https://doi.org/10.18637/jss.v082.i13.Suche in Google Scholar

Lausberg, M., Gilchrist, K., and Skipwith, J. (1995). Wood properties of Eucalyptus nitens grown in New Zealand. N. Z. J. For. Sci. 25: 147–163.Suche in Google Scholar

Lear, G., Kasal, B., and Anthony, R. (2010). Resistance drilling. Resistance drilling. In: Kasal, B., and Tannert, T. (Eds.), In situ assessment of structural timber. RILEM state of the art reports, 7. Dordrecht: Springer, pp. 51–57.10.1007/978-94-007-0560-9_5Suche in Google Scholar

Medhurst, J., Downes, G., Ottenschlaeger, M., Harwood, C., Evans, R., and Beadle, C. (2012). Intra-specific competition and the radial development of wood density, microfibril angle and modulus of elasticity in plantation-grown Eucalyptus nitens. Trees (Berl.) 26: 1771–1780, https://doi.org/10.1007/s00468-012-0746-z.Suche in Google Scholar

Newton, P.F. (2019). Acoustic-based prediction of end-product-based fibre determinates within standing jack pine trees. Forests 10: 29, https://doi.org/10.3390/f10070605.Suche in Google Scholar

Nutto, L. and Biechele, T. (2015).Drilling resistance measurement and the effect of shaft friction–using feed force information for improving decay identification on hard tropical wood. Proceedings 19th International Nondestructive Testing and Evaluation of Wood Symposium. Rio de Janeiro, Brazil, pp. 154–161.Suche in Google Scholar

Oliveira, J.T.d.S., Tarcísio, J., Wang, X., and Vidaurre, G.B. (2017). Assessing specific gravity of young Eucalyptus plantation trees using a resistance drilling technique. Holzforschung 71: 137–145, https://doi.org/10.1515/hf-2016-0058.Suche in Google Scholar

R Core Team (2020). R: a language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing.Suche in Google Scholar

Ratcliffe, B., Hart, F.J., Klápště, J., Jaquish, B., Mansfield, S.D., and El-Kassaby, Y.A. (2014). Genetics of wood quality attributes in western larch. Ann. For. Sci. 71: 415–424, https://doi.org/10.1007/s13595-013-0349-x.Suche in Google Scholar

Rinn, F., Schweingruber, F.H., and Schär, E. (1996). RESISTOGRAPH and X-ray density charts of wood. Comparative evaluation of drill resistance profiles and X-ray density charts of different wood species. Holzforschung - Int. J. Biol, Chem, Phy Technol. Wood 50: 303, https://doi.org/10.1515/hfsg.1996.50.4.303.Suche in Google Scholar

Rinn, F. (2012). Basics of micro-resistance drilling for timber inspection. Holztechnologie 53: 24–9.Suche in Google Scholar

Rinn, F. (2013). Practical application of micro-resistance drilling for timber inspection. Holztechnologie 54: 32–38.Suche in Google Scholar

Russell, L. (2020). Emmeans: estimated marginal means, aka least-squares means. R package version 1.5.0. https://CRAN.R-project.org/package=emmeans.Suche in Google Scholar

Santos, A., Amaral, M.E., Vaz, A., Anjos, O., and Rogério, S. (2008). Effect of Eucalyptus globulus wood density on papermaking potential. Tappi J. 5: 25–32.Suche in Google Scholar

Schimleck, L., Dahlen, J., Apiolaza, L.A., Downes, G., Emms, G., Evans, R., Moore, J., Pâques, L., Van den Bulcke, J., and Wang, X. (2019). Non-destructive evaluation techniques and what they tell us about wood property variation. Forests 10: 728, https://doi.org/10.3390/f10090728.Suche in Google Scholar

Sharapov, E., Wang, X., and Smirnova, E. (2017). Drill bit friction and its effect on resistance drilling measurements in logs, Proceedings of the 20th international nondestructive testing and evaluation of wood symposium. Madison, Wisconsin USA, pp. 405–415.Suche in Google Scholar

Sharapov, E., Wang, X., Smirnova, E., and Wacker, J.P. (2018). Wear behavior of drill bits in wood drilling resistance measurements. Wood Fiber Sci. 50: 154–166, 50:154-166, https://doi.org/10.22382/wfs-2018-017.Suche in Google Scholar

Sharapov, E., Brischke, C., Militz, H., and Smirnova, E. (2019). Prediction of modulus of elasticity in static bending and density of wood at different moisture contents and feed rates by drilling resistance measurements. European Journal of Wood and Wood Products 77: 833–842, https://doi.org/10.1007/s00107-019-01439-2.Suche in Google Scholar

Sharapov, E., Brischke, C., and Militz, H. (2020). Effect of grain direction on drilling resistance measurements in wood. Int. J. Architect. Herit: 1–9, https://doi.org/10.1080/15583058.2020.1766158.Suche in Google Scholar

Standards Australia (2000). Timber—method of test—method 3: density (AS/NZ 1080.3:2000).Suche in Google Scholar

Walker, J.C. (2006). Primary wood processing: principles and practice. Netherlands: Springer.Suche in Google Scholar

Walker, T.D., Isik, F., and McKeand, S.E. (2019). Genetic variation in acoustic time of flight and drill resistance of juvenile wood in a large loblolly pine breeding population. For. Sci. 65: 469–482, https://doi.org/10.1093/forsci/fxz002.Suche in Google Scholar

Wang, S.-Y. and Lin, C.J. (2001). Application of the drill resistance method for density boundary evaluation of earlywood and latewood of Taiwania (Taiwania cryptomerioides Hay.) plantation. Taiwan Forest Science 16: 197–200.Suche in Google Scholar

Wang, S.-Y., Chiu, C.-M., and Lin, C.-J. (2003). Application of the drilling resistance method for annual ring characteristics: evaluation of Taiwania (Taiwania cryptomerioides) trees grown with different thinning and pruning treatments. J. Wood Sci. 49: 116–124, https://doi.org/10.1007/s100860300018.Suche in Google Scholar

Wimmer, R., Downes, G., Evans, R., Rasmussen, G., and French, J. (2002). Direct effects of wood characteristics on pulp and handsheet properties of Eucalyptus globulus. Holzforschung 56: 244–252, https://doi.org/10.1515/hf.2002.040.Suche in Google Scholar

Winistorfer, P.M., Xu, W., and Wimmer, R. (1995). Application of a drill resistance technique for density profile measurement in wood composite panels. For. Prod. J. 45: 90.Suche in Google Scholar

Zobel, B.J. and Van Buijtenen, J.P. (1989). Wood variation, its causes and control. Berlin, Heidelberg: Springer-Verlag.10.1007/978-3-642-74069-5Suche in Google Scholar

Zobel, B.J. and Sprague, J.R. (1998). Juvenile wood in forest trees. Berlin, Heidelberg: Springer-Verlag.10.1007/978-3-642-72126-7Suche in Google Scholar