Article
Publicly Available
Frontmatter
Published/Copyright:
April 23, 2015
Published Online: 2015-4-23
Published in Print: 2015-5-1
©2015 by De Gruyter
Articles in the same Issue
- Frontmatter
- Review Articles
- A large-scale test set-up for measuring VOC emissions from wood products under laboratory conditions in simulated real rooms
- Industrial waste water for biotechnological reduction of aldehyde emissions from wood products
- Original Articles
- Light scattering characterization of lignosulfonate structure in saline solutions
- Differences in wood properties of Picea abies L. Karst. in relation to site of provenance and population genetics
- Rapid determination of biomass and polypropylene in three types of wood plastic composites (WPCs) using FTIR spectroscopy and partial least squares regression (PLSR)
- Thermal modification of Southern pine combined with wax emulsion preimpregnation: effect on hydrophobicity and dimensional stability
- Mixed-mode fracture toughness of bond lines of PRF and PUR adhesives in European beech wood
- Effect of specimen dimension and pre-heating temperature on supercritical CO2 dewatering of radiata pine sapwood
- Sound absorption of wood-based materials
- Threshold for ion movements in wood cell walls below fiber saturation observed by X-ray fluorescence microscopy (XFM)
- Oxygen plasma treatment of bamboo fibers (BF) and its effects on the static and dynamic mechanical properties of BF-unsaturated polyester composites
- A combined view on composition, molecular structure, and micromechanics of fungal degraded softwood
- Morphological changes induced in wood samples by aqueous NaOH treatment and their effects on the conversion of cellulose I to cellulose II
- Young’s modulus and shear modulus of solid wood measured by the flexural vibration test of specimens with large height/length ratios
- Effects of cell wall ultrastructure on the transverse shrinkage anisotropy of Scots pine wood
- Short Note
- Reacted copper(II) concentrations in earlywood and latewood of micronized copper-treated Canadian softwood species
Articles in the same Issue
- Frontmatter
- Review Articles
- A large-scale test set-up for measuring VOC emissions from wood products under laboratory conditions in simulated real rooms
- Industrial waste water for biotechnological reduction of aldehyde emissions from wood products
- Original Articles
- Light scattering characterization of lignosulfonate structure in saline solutions
- Differences in wood properties of Picea abies L. Karst. in relation to site of provenance and population genetics
- Rapid determination of biomass and polypropylene in three types of wood plastic composites (WPCs) using FTIR spectroscopy and partial least squares regression (PLSR)
- Thermal modification of Southern pine combined with wax emulsion preimpregnation: effect on hydrophobicity and dimensional stability
- Mixed-mode fracture toughness of bond lines of PRF and PUR adhesives in European beech wood
- Effect of specimen dimension and pre-heating temperature on supercritical CO2 dewatering of radiata pine sapwood
- Sound absorption of wood-based materials
- Threshold for ion movements in wood cell walls below fiber saturation observed by X-ray fluorescence microscopy (XFM)
- Oxygen plasma treatment of bamboo fibers (BF) and its effects on the static and dynamic mechanical properties of BF-unsaturated polyester composites
- A combined view on composition, molecular structure, and micromechanics of fungal degraded softwood
- Morphological changes induced in wood samples by aqueous NaOH treatment and their effects on the conversion of cellulose I to cellulose II
- Young’s modulus and shear modulus of solid wood measured by the flexural vibration test of specimens with large height/length ratios
- Effects of cell wall ultrastructure on the transverse shrinkage anisotropy of Scots pine wood
- Short Note
- Reacted copper(II) concentrations in earlywood and latewood of micronized copper-treated Canadian softwood species