Quality control methods for thermally modified wood

References

Ahajji, A., Diouf, P.N., Aloui, F., Elbakali, I., Perrin, D., Merlin, A., George, B. (2009) Influence of heat treatment on antioxidant properties and colour stability of beech and spruce wood and their extractives. Wood Sci. Technol. 43:69–83.10.1007/s00226-008-0208-3Suche in Google Scholar

Altgen, M., Welzbacher, C., Humar, M., Militz, H. (2012) ESR-spectroscopy as a potential method for the quality control of thermally modified wood. COST-Action FP0904 – Thermo-Hydro-Mechanical Wood Behaviour and Processing, Nancy, France.Suche in Google Scholar

Altgen, M., Ala-Viikari, J., Tetri, T., Hukka, A., Militz, H. (2014) The impact of elevated steam pressure during the thermal modification of Scots pine and Norway spruce. In: Final Conference COST Action FP0904, Recent Advances in the Field of TH and THM Wood Treatment, Skellefteå, Sweden. pp. 19–21.Suche in Google Scholar

Altgen, M., Adamopoulos, S., Militz, H. (2015) Wood defects during industrial-scale production of thermally modified Norway spruce and Scots pine. Wood Mater. Sci. Eng. DOI:10.1080/17480272.2014.988750.10.1080/17480272.2014.988750Suche in Google Scholar

Avramidis, S. (1989) Evaluation of “three-variable” models for the prediction of equilibrium moisture content in wood. Wood Sci. Technol. 23:251–257.10.1007/BF00367738Suche in Google Scholar

Bächle, H., Zimmer, B., Windeisen, E., Wegener, G. (2009) Non-destructive evaluation of thermally modified ash (Fraxinus excelsior L.) by near infrared spectroscopy (NIRS). In: European Conference on Wood Modification, Stockholm, Sweden, pp. 173–176.Suche in Google Scholar

Bächle, H., Zimmer, B., Windeisen, E., Wegener, G. (2010a) Evaluation of thermally modified beech and spruce wood and their properties by FT-NIR spectroscopy. Wood Sci. Technol. 44: 421–433.10.1007/s00226-010-0361-3Suche in Google Scholar

Bächle, H., Zimmer, B., Schnabel, T. (2010b) Qualitäts- und Produktionskontrolle von Thermisch Modifizierten Hölzern (TMT) mit Farbmessung und NIR-Spektroskopie. In: Beiträge 6. Europäischer TMT Workshop 2010. Dresden.Suche in Google Scholar

Bächle, H., Zimmer, B., Wegener, G. (2012) Classification of thermally modified wood by FT-NIR spectroscopy and SIMCA. Wood Sci. Techn. 46:1181–1192.10.1007/s00226-012-0481-zSuche in Google Scholar

Ball, R.D., Simpson, I.G., Pang, S. (2001) Measurement, modelling and prediction of equilibrium moisture content in Pinus radiata heartwood and sapwood. Holz Roh Werkst. 59:457–462.10.1007/s001070100242Suche in Google Scholar

Bargigia, I., Nevin, A., Farina, A., Pifferi, A., D’Andrea, C., Karlsson, M., Lundin, P., Somesfalean, G., Svanberg, S. (2013) Diffuse optical techniques applied to wood characterization. J. Near Infrared Spectr. 21:259–268.10.1255/jnirs.1068Suche in Google Scholar

Biziks, V., Andersons, B., Belkova, L., Kapača, E., Militz, H. (2013) Changes in the microstructure of birch wood after hydrothermal treatment. Wood Sci. Technol. 47:717–735.10.1007/s00226-013-0531-1Suche in Google Scholar

Boonstra, M.J., Van Acker, J., Kegel, E., Stevens, M. (2007) Optimisation of a two-stage heat treatment process. Durability aspects. Wood Sci. Technol. 41:31–57.10.1007/s00226-006-0087-4Suche in Google Scholar

Brischke, C., Rapp, A.O., Welzbacher, C.R. (2006) High energy multiple impact (HEMI)-test, Part 1: A new tool for quality control of thermally modified timber. Document No. 06-20346. International Research Group on Wood Protection, Stockholm, Sweden.Suche in Google Scholar

Brischke, C., Welzbacher, C.R., Brandt, K., Rapp, A.O. (2007) Quality control of thermally modified timber: Interrelationship between heat treatment intensities and CIE L*a*b* color data on homogenized wood samples. Holzforschung 61:19–22.10.1515/HF.2007.004Suche in Google Scholar

Brischke, C., Sachse, K.A., Welzbacher, C.R. (2014) Modeling the influence of thermal modification on the electrical conductivity of wood. Holzforschung 68:185–193.10.1515/hf-2013-0041Suche in Google Scholar

Brosse, N., El Hage, R., Chaouch, M., Petrissans, M., Dumarcay, S., Gerardin, P. (2010) Investigation of the chemical modifications of beech wood lignin during heat treatment. Polym. Degrad. Stab. 95:1721–1726.10.1016/j.polymdegradstab.2010.05.018Suche in Google Scholar

Budakçi, M., Ilçe, A.C., Gürleyen, T., Utar, M. (2013) Determination of the surface roughness of heat-treated wood materials planed by the cutters of a horizontal milling machine. BioResources 8:3189–3199.10.15376/biores.8.3.3189-3199Suche in Google Scholar

Cademartori, P.H.G., Dos Santos, P.S.B., Serrano, L., Labidi, J., Gatto, D.A. (2013) Effect of thermal treatment on physicochemical properties of Gympie messmate wood. Ind. Crops Prod. 45:360–366.10.1016/j.indcrop.2012.12.048Suche in Google Scholar

Candelier, K., Chaouch, M. Dumarcay, S., Petrissans, A., Petrissans, M., Gerardin, P. (2011) Utilization of thermodesorption coupled to GC-MS to study stability of different wood species to thermodegradation. J. Anal. Appl. Pyrolysis 92:376–383.10.1016/j.jaap.2011.07.010Suche in Google Scholar

Candelier, K., Dumarcay, S., Petrissans, A., Petrissans, M., Kamdem, P., Gerardin, P. (2013a) Thermodesorption coupled to GC-MS to characterize volatiles formation kinetic during wood thermodegradation. J. Anal. Appl. Pyrolysis 101:96–102.10.1016/j.jaap.2013.02.006Suche in Google Scholar

Candelier, K., Treu, A., Dibdiakova, J., Larnoy, E., Petrissans, A., Dumarcay, S., Petrissans, M., Gerardin, P. (2013b) Utilization of tg-dsc to study thermal degradation of beech and silver fir. Document No. 13-40628. International Research Group on Wood Protection, Stockholm, Sweden.Suche in Google Scholar

Chaouch, M., Pétrissans, M., Pétrissans, A., Gérardin, P. (2010) Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species. Polym. Degrad. Stab. 95:2255–2259.10.1016/j.polymdegradstab.2010.09.010Suche in Google Scholar

Chaouch, M., Dumarçay, S., Pétrissans, A., Pétrissans, M., Gérardin, P. (2013) Effect of heat treatment intensity on some conferred properties of different European softwood and hardwood species. Wood Sci. Technol. 47:663–673.10.1007/s00226-013-0533-zSuche in Google Scholar

Clauder, L., Richter, S., Unger, W., Pfriem, A. (2013) Application of a model for the prediction of fungal degradation of thermally modified beech wood by Trametes versicolor. Document No. 13-40622. International Research Group on Wood Protection, Stockholm, Sweden.Suche in Google Scholar

Del Menezzi, C.H.S., Tomasselli, I. (2006) Contact thermal post-treatment of oriented strandboard to improve dimensional stability: A preliminary study. Holz Roh Werkst. 64:212–217.10.1007/s00107-005-0052-1Suche in Google Scholar

DIN EN 113 (1996) Holzschutzmittel-Prüfverfahren zur Bestimmung der vorbeugenden Wirksamkeit gegen holzzerstörende Basidiomyceten. Beuth, Berlin.Suche in Google Scholar

DIN 6174 (2007) Farbmetrische Bestimmung von Farbmaßzahlen und Farbabständen im angenähert gleichförmigen CIE L*A*B*-Farbraum, Beuth, Berlin.Suche in Google Scholar

Engelund, E.T., Klamer, M., Venas, T.M. (2010) Acquisition of sorption isotherms for modified woods by the use of dynamic vapour sorption instrumentation. Principles and Practice. Document No. 10-40518. International Research Group on Wood Protection, Stockholm, Sweden.Suche in Google Scholar

Esteves, B., Pereira, H. (2008) Quality assessment of heat-treated wood by NIR spectroscopy. Holz Roh Werkst. 66:323–332.10.1007/s00107-008-0262-4Suche in Google Scholar

Esteves, B.M., Pereira, H.M. (2009) Wood modification by heat treatment: A review. BioResources 4:370–404.10.15376/biores.4.1.EstevesSuche in Google Scholar

Fengel, D., Wegener, G. Wood: Chemistry, Ultrastructure, Reactions. Walter De Gruyter, Berlin, Germany, 1989.Suche in Google Scholar

González-Peña, M.M., Hale, M.D.C. (2009) Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 1: Colour evolution and colour changes. Holzforschung 63:385–393.10.1515/HF.2009.078Suche in Google Scholar

González-Peña, M.M., Hale, M.D.C. (2011) Rapid assessment of physical properties and chemical composition of thermally modified wood by mid-infrared spectroscopy. Wood Sci. Technol. 45:83–102.10.1007/s00226-010-0307-9Suche in Google Scholar

Gündüz, G., Korkut, S., Korkut, D.S. (2008) The effects of heat treatment on physical and technological properties and surface roughness of Camiyani Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood. Bioresour. Technol. 99:2275–2280.10.1016/j.biortech.2007.05.015Suche in Google Scholar PubMed

Hakkou, M., Petrissans, M., Zoulalian, A., Gerardin, P. (2005) Investigation of wood wettability changes during heat treatment on the basis of chemical analysis. Polym. Degrad. Stab. 89:1–5.10.1016/j.polymdegradstab.2004.10.017Suche in Google Scholar

Hietala, S., Maunu, S.L., Sundholm, F., Jamsa, S., Viitaniemi, P. (2002) Structure of thermally modified wood studied by liquid state NMR measurements. Holzforschung 56:522–528.10.1515/HF.2002.080Suche in Google Scholar

Hill, C.A.S. Wood Modification – Chemical, Thermal and Other Processes. John Wiley & Sons, Chichester, 2006.10.1002/0470021748Suche in Google Scholar

Hill, C.A.S., Ramsay, J., Keating, B., Laine, K., Rautkari, L., Hughes, M., Constant, B. (2012) The water vapour sorption properties of thermally modified and densified wood. J. Mater. Sci. 47:3191–3197.10.1007/s10853-011-6154-8Suche in Google Scholar

Hillis, W.E. (1984) High temperature and chemical effects on wood stability – Part 1: General considerations. Wood Sci. Technol. 18:281–293.10.1007/BF00353364Suche in Google Scholar

Johansson, D., Moren, T. (2006) The potential of colour measurement for strength prediction of thermally treated wood. Holz Roh Werkst. 64:104–110.10.1007/s00107-005-0082-8Suche in Google Scholar

Korkut, D.S., Korkut, S., Bekar, I., Budakçi, M., Dilik, T., Çakliclier, N. (2008) The effects of heat treatment on the physical properties and surface roughness of turkish hazel (Corylus colurna l.) wood. International Journal of Molecular Sciences, 9:1772–1783.10.3390/ijms9091772Suche in Google Scholar PubMed PubMed Central

Korosec, R.C., Lavric, B., Rep, G., Pohleven, F., Bukovec, P. (2009) Thermogravimetry as a possible tool for determining modification degree of thermally treated Norway spruce wood. J. Therm. Anal. Calorim. 98:189–195.10.1007/s10973-009-0374-zSuche in Google Scholar

Kotilainen, R.A., Toivanen, T.J., Alen, R.J. (2000) FTIR monitoring of chemical changes in softwood during heating. J. Wood Chem. Technol. 20:307–320.10.1080/02773810009349638Suche in Google Scholar

Li, J., Henriksson, G., Gellerstedt, G. (2007) Lignin depolymerization/repolymerization and its critical role for delignification of aspen wood by steam explosion. Bioresour. Technol. 98:3061–3068.10.1016/j.biortech.2006.10.018Suche in Google Scholar

Loos, W.E. (1968) Dimensional stability of wood-plastic combinations to moisture changes. Wood Sci. Technol. 2:308–312.10.1007/BF00350277Suche in Google Scholar

Lopes, D.B., Militz, H., Mai, C. (2010) Pilodyn testing of thermally and chemically modified wood. In: The Fifth European Conference on Wood Modification ECWM5 Proceedings. Eds. Hill, C.A.S., Militz, H., Andersons, B. (Hg.), Fifth European Conference on Wood Modification, Riga, pp. 255–258.Suche in Google Scholar

Lowell, S., Shields, J.E., Thomas, M., Thommes, M. (2004) Characterization of Porous Solids and Powders: Surface Area, Pore Size and Density. Kluwer Academic, Dordrecht.10.1007/978-1-4020-2303-3Suche in Google Scholar

Lykidis, C., Konstantakos, P., Tsalikis, S. (2013) Effects of closed system hydrothermal treatment conditions on colour and hardness of European beech wood. In: Proceedings of 3^rd COST FP0904 Conference: Evaluation, Processing and Prediction of THM Treated Wood Behavior by Experimental and Numerical Methods, 9–11 April, Iasi, Romania, pp. 41–42.Suche in Google Scholar

Mahnert, K.-C., Adamopoulos, S., Koch, G., Militz, H. (2013) Topochemistry of heat-treated and N-methylol melamine-modified wood of koto (Pterygota macrocarpa K. Schum.) and limba (Terminalia superba Engl. et. Diels). Holzforschung, 67:137–146.10.1515/hf-2012-0017Suche in Google Scholar

Mayes, D., Oksanen, O. (2002) ThermoWood Handbook. Finnforest, Finland.Suche in Google Scholar

Metsä-Kortelainen, S., Antikainen, T., Viitaniemi, P. (2006) The water absorption of sapwood and hardwood of Scots pine an Norway spruce heat-treated at 170°C, 190°C, 210°C and 230°C. Holz Roh Werkst. 64:192–197.10.1007/s00107-005-0063-ySuche in Google Scholar

Meyer, L., Brischke, C., Welzbacher, C.R. (2011) Dynamic and static hardness of wood – method development and comparative studies. Int. Wood Prod. J. 2:5–11.10.1179/2042645311Y.0000000005Suche in Google Scholar

Militz, H. (2002) Heat treatment technologies in Europe: Scientific background and technological state-of-art. In: Proceedings of Conference on Enhancing the Durability of Lumber and Engineered Wood Products, Kissimmee, US, pp. 239–249.Suche in Google Scholar

Militz, H., Altgen, M. (2011) Development of methodology to predict wood properties of thermally modified wood. In: Proceedings of the 1^st COST Action FP0904 Conference: Mechano-Chemical Transformations of Wood during Thermo-Hydral-Mechanical Processes, Biel, Switzerland, pp. 17–18.Suche in Google Scholar

Militz, H., Altgen, M. (2014) Processes and properties of thermally modified wood manufactured in Europe. In: Deterioration and Protection of Sustainable Biomaterials. Vol. 1158. Eds. Schultz, T.P., Goodell, B., Nicholas, D.D. ACS Symposium Series, pp. 269–285.10.1021/bk-2014-1158.ch016Suche in Google Scholar

Mitsui, K., Tolvai, L. (2005) Color changes in acetylated wood by combined treatment of light and heat. Holz Roh Werkst. 63:392–393.10.1007/s00107-005-0022-7Suche in Google Scholar

Nguila-Inari, G., Petrissans, M., Lambert, J., Ehrhardt, J.J., Gérardin, P. (2006) XPS characterization of wood chemical composition after heat-treatment. Surf. Interface Anal. 38:1336–1342.10.1002/sia.2455Suche in Google Scholar

Nguyen, T., Zavarin, E., Barrall, E.M. (1981) Thermal analysis of lignocellulosic materials. J. Macromol. Sci. C20:1–65.10.1080/00222358108080014Suche in Google Scholar

Nuopponen, M., Vuorinen, T., Jämsä, S., Viitaniemi, P. (2005) Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies. J. Wood Chem. Technol. 24:13–26.10.1081/WCT-120035941Suche in Google Scholar

Obataya, E., Higashihara, T., Tomita, B. (2002) Hygroscopicity of heat-treated wood III. Effects of steaming on the hygroscopicity of wood. Mokuzai Gakkaishi 48:348–355.Suche in Google Scholar

Pétrissans, M., Gérardin, P., Bakali, I.E., Serraj, M. (2003) Wettability of heat-treated wood. Holzforschung 57:301–307.10.1515/HF.2003.045Suche in Google Scholar

Pfriem, A., Zauer, M., Wagenführ, A. (2010) Alteration of the unsteady sorption behaviour of maple (Acer pseudoplatanus L.) and spruce (Picea abies (L.) Karst.) due to thermal modification. Holzforschung 64:235–241.10.1515/hf.2010.029Suche in Google Scholar

Phuong, L.X., Takayama, M., Shida, S., Matsumoto, Y., Aoyagi, T. (2007) Determination of the accessible hydroxyl groups in heat-treated Styrax tonkinensis (Pierre) Craib ex Hartwich wood by hydrogen-deuterium exchange and H2 NMR spectroscopy. Holzforschung 61:488–491.10.1515/HF.2007.086Suche in Google Scholar

Plötze, M., Niemz, P. (2011) Porosity and pore size distribution of different wood types as determined by mercury intrusion porosimetry. Eur. J. Wood Wood Prod. 69:649–657.10.1007/s00107-010-0504-0Suche in Google Scholar

Rapp, A.O., Brischke, C., Welzbacher, C.R. (2006) Interrelationship between the severity of heat treatments and sieve fractions after impact ball milling: A mechanical test for quality control of thermally modified wood. Holzforschung 60:64–70.10.1515/HF.2006.012Suche in Google Scholar

Repellin, V., Guyonnet, R. (2003) Evaluation of heat-treated beech by non-destructive testing. In: Abstracts of the First European Conference on Wood Modification, Ghent, Belgium.Suche in Google Scholar

Rodrigues, T.O., Rousset, P.L.A. (2009) Effects of torrefaction on energy properties of Eucalyptus grandis wood. Cerne 15:446–452.Suche in Google Scholar

Sandberg, D., Haller, P., Navi, P. (2013) Thermo-hydro and thermo-hydro-mechanical wood processing: An opportunity for future environmentally friendly wood products. Wood Mater. Sci. Eng. 8:64–88.10.1080/17480272.2012.751935Suche in Google Scholar

Sansonetti, E., Andersons, B., Biziks, V., Grinins, J., Chirkova, J. (2013) Investigation of surface properties of hydrothermally modified soft deciduous wood. Int. Wood Prod. J. 4:122–127.10.1179/2042645312Y.0000000028Suche in Google Scholar

Schnabel, T., Wieland, S., Huber, H. (2011) Quality control of thermally modified timber: An approach for in-line colour measurement method. In: COST Action FP0904 Workshop Mechano-Chemical Transformations of Wood during THM Processing. Eds. Navi, P., Roth, A. Biel, pp. 23–24.Suche in Google Scholar

Schwanninger, M., Hinterstoisser, B., Gierlinger, N., Wimmer, R., Hanger, J. (2004) Application of Fourier transform near infrared spectroscopy (FT-NIR) to thermally modified wood. Holz Roh Werkst. 62:483–485.10.1007/s00107-004-0520-zSuche in Google Scholar

Seborg, R.M., Tarkow, H., Stamm, A.J. (1953) Effect of heat upon dimensional stabilisation of wood. J. Forest Prod. Res. Soc. 3:59–67.Suche in Google Scholar

Sivonen, H., Maunu, S.L., Sundholm, F., Jamsa, S., Viitaniemi, P. (2002) Magnetic resonance studies of thermally modified wood. Holzforschung 56:648–654.10.1515/HF.2002.098Suche in Google Scholar

Stamm, A.J. (1956) Thermal degradation of wood and cellulose. Ind. Eng. Chem. 48:413–417.10.1021/ie51398a022Suche in Google Scholar

Stamm, A.J., Burr, H.K., Kline, A.A. (1946) Staby-wood – A heat stabilized wood. Ind. Eng. Chem. 38:630–634.10.1021/ie50438a027Suche in Google Scholar

Standfest, G., Kutnar, A., Plank, B., Petutschnigg, A., Kamke, F.A., Dunky, M. (2013) Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography. Wood Sci. Technol. 47:121–139.10.1007/s00226-012-0496-5Suche in Google Scholar

Stanzl-Tschegg, S., Beikircher, W., Loidl, D. (2009) Comparison of mechanical properties of thermally modified wood at growth ring and cell wall level by means of instrumented indentation tests. Holzforschung 63:443–448.10.1515/HF.2009.085Suche in Google Scholar

Suchy, M., Virtanen, J., Kontturi, E., Vuorinen, T. (2010) Impact of drying on wood ultrastructure observed by deuterium exchange and photoacoustic FT-IR spectroscopy. Biomacromolecules 11: 515–520.10.1021/bm901268jSuche in Google Scholar PubMed

Suematsu, A., Hirai, N., Saito, F. (1980) Properties of hot pressed wood. Part 1. Mokuzai Gakkaishi 26:581–586.Suche in Google Scholar

Sundqvist, B. (2004) Colour Changes and Acid Formation in Wood during Heating. Dissertation. Luleâ University of Technology, Skellefteâ.Suche in Google Scholar

Sundqvist, B., Karlsson, O., Westermark, U. (2006) Determination of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour, strength and hardness. Wood Sci. Technol. 40:549–561.10.1007/s00226-006-0071-zSuche in Google Scholar

Šušteršic, Ž., Mohareb, A., Chaouch, M., Pétrissans, M., Petrič, M., Gérardin, P. (2010) Prediction of decay resistance of heat treated wood on the basis of its elemental composition. Polym. Degrad. Stab. 95:94–97.10.1016/j.polymdegradstab.2009.10.013Suche in Google Scholar

Taghiyari, H.R. (2013) Effects of heat-treatment on permeability of untreated and nanosilver-impregnated native hardwoods. Maderas, Cienc. Tecnol. 15:183–194.10.4067/S0718-221X2013005000015Suche in Google Scholar

Tjeerdsma, B.F. Heat Treatment of Wood – Thermal Modification. SHR Timber Research, Wageningen, The Netherlands, 2006.Suche in Google Scholar

Tjeerdsma, B.F., Militz, H. (2005) Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz Roh Werkst. 63:102–111.10.1007/s00107-004-0532-8Suche in Google Scholar

Tjeerdsma, B.F., Boonstra, M., Pizzi, A., Tekely, P., Militz, H. (1998) Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz Roh Werkst. 56:149–153.10.1007/s001070050287Suche in Google Scholar

Torner, T., Welzbacher, C.R., Rapp, A.O. (2013a) Methoden für die Qualitätskontolle thermisch modifizierter Hölzer. Teil 1. Holztechnologie 54:39–44.Suche in Google Scholar

Torner, T., Welzbacher, C.R., Rapp, A.O. (2013b) Methoden für die Qualitätskontolle thermisch modifizierter Hölzer. Teil 2. Holztechnologie 54:43–47.Suche in Google Scholar

Tsyganova, S.I., Korol’Kova, I.V., Bondarenko, G.V., Kargin, V.F. (2011) Formation of the pore structure of modified wood by treatment with heat and water. Russ. J. Appl. Chem. 84:1997–2001.10.1134/S1070427211110280Suche in Google Scholar

Tuong, V.M., Li, J. (2011) Changes caused by heat treatment in chemical composition and some physical properties of acacia hybrid sapwood. Holzforschung 65:67–72.10.1515/hf.2010.118Suche in Google Scholar

Viitaniemi, P., Jämsä, S., Sundholm, F. (2001) Method of determining the degree of modification of a heat modified woodproduct. Patent Appl. WO01/53812 A1.Suche in Google Scholar

Wahl, P., Simonaho, S.P., Pakarinen, T., Silvennionen, R. (2004) Effect of heat treatment on scattering of laser light from wood grains. Holz Roh Werkst. 62:343–345.10.1007/s00107-004-0511-0Suche in Google Scholar

Watt, M., Garnett, B., Walker, J. (1996) The use of the Pilodyn for assessing outerwood density in New Zealand radiate pine. For. Prod. J. 46:101–105.Suche in Google Scholar

Welzbacher, C.R. (2012) Qualitätskontrolle von TMT – Internationale Forschungsaktivitäten und Tendenzen. In: Beiträge 7. Europäischer TMT Workshop 2012. Dresden.Suche in Google Scholar

Welzbacher, C., Brischke, C. (2012) Interrelationship between heat treatment intensity and gas emissions as a tool for the dynamic process control. In: Sixth European Conference on Wood Modification, Ljubljana, Slovenia.Suche in Google Scholar

Welzbacher, C., Brischke, C., Rapp, A. (2007) Influence of treatment temperature and duration on selected biological, mechanical, physical and optical properties of thermally modified timber. Wood Mater. Sci. Eng. 2:66–76.10.1080/17480270701770606Suche in Google Scholar

Welzbacher, C., Brischke, C., Rapp, A.O. (2009) Estimating the heat treatment intensity through various properties of thermally modified timber (TMT). Document No. 09-40459. International Research Group on Wood Protection, Stockholm, Sweden.Suche in Google Scholar

Welzbacher, C.R., Rassam, G., Talaei, A., Brischke, C. (2011) Microstructure, strength and structural integrity of heat-treated beech and spruce wood. Wood Mater. Sci. Eng. 6:219–227.10.1080/17480272.2011.622411Suche in Google Scholar

Wikberg, H., Maunu, S. (2004) Characterisation of thermally modified hard- and softwoods by 13C CPMAS NMR. Carbohydr. Polym. 58:461–466.10.1016/j.carbpol.2004.08.008Suche in Google Scholar

Willems, W., Militz, H. (2013) From chemical process monitoring to direct control of thermally modified wood properties. In: Book of Abstracts of the 3^rd COST FP0904 Annual Conference, Iasi, Romania, pp. 17–18.Suche in Google Scholar

Willems, W., Tausch, A., Militz, H. (2010) Direct estimation of the durability of high-pressure steam modified wood by ESR-spectroscopy. Document No. 10-40508. International Research Group on Wood Protection, Stockholm, Sweden.Suche in Google Scholar

Willems, W., Mai, C., Militz, H. (2013) Thermal wood modification chemistry analysed using van Krevelen’s representation. Int. Wood Prod. J. 4:166–171.10.1179/2042645313Y.0000000033Suche in Google Scholar

Windeisen, E., Strobel, C., Wegener, G. (2007) Chemical changes during the production of thermo-treated beech wood. Wood Sci. Technol. 41:523–536.10.1007/s00226-007-0146-5Suche in Google Scholar

Windeisen, E., Bächle, H., Zimmer, B., Wegener, G. (2009) Relations between chemical changes and mechanical properties of thermally treated wood 10^th EWLP, Stockholm, Sweden, August 25–28, 2008. Holzforschung 63:773–778.10.1515/HF.2009.084Suche in Google Scholar

Zaihan, J., Hill, C.A.S., Curling, S., Hashim, W.S., Hamdan, H. (2009) Moisture adsorption isotherms of Acacia mangium and Endospermum malaccense using dynamic vapour sorption. J. Trop. For. Sci. 21:277–285.Suche in Google Scholar

Zeitsch, K.J. The Chemistry and Technology of Furfural and Its Many By-Products. Sugar Series 13, Elsevier, Amsterdam, 2000.Suche in Google Scholar