Flatwise Young’s modulus and flatwise shear modulus of plywood measured by flexural vibration test

References

Adams, D.F., Carlsson, L.F., Pipes, R.B. Experimental Characterization of Advanced Composite Materials, 3rd ed., CRC Press, Boca Raton, FL, 2003.Search in Google Scholar

Brancheriau, L. (2006) Influence of cross section dimensions on Timoshenko’s shear factor. Application to wooden beams in free-free flexural vibration. Ann. For. Sci. 63:319–312.Search in Google Scholar

Brancheriau, L., Baillères, H. (2002) Natural vibration analysis of clear wooden beams: a theoretical review. Wood Sci. Technol. 36:347–365.10.1007/s00226-002-0143-7Search in Google Scholar

Brancheriau, L., Baillères, H. (2003) Use of the partial least squares method with acoustic vibration spectra as a new grading technique for structural timber. Holzforschung 57:644–652.10.1515/HF.2003.097Search in Google Scholar

Chauhan, S.S., Entwistle, K.M., Walker, J.C.F. (2005) Differences in acoustic velocity by resonance and transit-time methods in an anisotropic laminated wood medium. Holzforschung 59:428–434.10.1515/HF.2005.070Search in Google Scholar

Chui, Y.H., Smith, I. (1990) Influence of rotatory inertia, shear deformation and support condition on natural frequencies of wooden beams. Wood Sci. Technol. 24:233–245.Search in Google Scholar

Divos, F., Tanaka, T., Nagao, H., Kato, H. (1998) Determination of shear modulus on construction size timber. Wood Sci. Technol. 32:393–402.Search in Google Scholar

Divos, F., Denes, L., Iñigues, G. (2005) Effect of cross-sectional change of a board specimen on stress wave velocity determination. Holzforschung 59:230–231.10.1515/HF.2005.036Search in Google Scholar

Dong, Y., Nakao, T., Tanaka, C., Takahashi, A., Nishino, Y. (1996) Anisotropic shear modulus of wood-based composite. J. Soc. Mater. Sci. Jpn. 45:566–571.Search in Google Scholar

Goens, E. (1931) Über die Bestimmung des Elastizitätsmodulus von Stäben mit Hilfe von Biegungsschwingungen. Ann. Phys. Ser. 7:649–678.Search in Google Scholar

Haines, D.W., Leban, L.M., Herbé, C. (1996) Determination of Young’s modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods. Wood Sci. Technol. 30: 253–163.10.1007/BF00229348Search in Google Scholar

Hearmon, R.F.S. (1943) The significance of coupling between shear and extension in the elastic behaviour of wood and plywood. Proc. Phys. Soc. 55:67–80.Search in Google Scholar

Hearmon, R.F.S. (1946) The elastic constants of anisotropic materials. Rev. Mod. Phys. 18:409–440.Search in Google Scholar

Hearmon, R.F.S. (1958) The influence of shear and rotatory inertia on the free flexural vibration of wooden beams. Br. J. Appl. Phys. 9:381–388.Search in Google Scholar

Hearmon, R.F.S., Barkas, W.W. (1941) The effect of grain direction on the Young’s moduli and rigidity moduli of beech and sitka spruce. Proc. Phys. Soc. 53:674–680.Search in Google Scholar

Ilic, J. (2001) Relationship among the dynamic and static elastic properties of air-dry Eucalyptus delegatensis R. Baker. Holz Roh- Werkst. 59:169–175.10.1007/s001070100198Search in Google Scholar

Ishihara, K., Sobue, N., Takemura, T. (1978) Effect of grain angle on complex Young’s modulus E* of spruce and hoo. Mokuzai Gakkaishi 24:375–379.Search in Google Scholar

Kubojima, Y., Tonosaki, M. (2012) Young’s and shear moduli of glued laminated timber composed different species obtained by a flexural vibration test. Holzforschung 66:871–875.10.1515/hf-2011-0209Search in Google Scholar

Kubojima, Y., Yoshihara, H., Ohta, M., Okano, T. (1996) Examination of the method of measuring the shear modulus of wood based on the Timoshenko theory of bending. Mokuzai Gakkaishi 42:1170–1176.Search in Google Scholar

Kubojima, Y., Yoshihara, H., Ohta, M., Okano, T. (1997) Accuracy of the shear modulus of wood obtained by the Timoshenko’s theory of bending. Mokuzai Gakkaishi 43:439–443.Search in Google Scholar

Kubojima, Y., Suzuki, Y., Tonosaki, M. (2005) Vibrational properties of green wood in high-temperature water vapor. Holzforschung 59:446–450.10.1515/HF.2005.073Search in Google Scholar

Kudo, O. (1970) On the flexural and torsional rigidities of wood core composites. Mokuzai Gakkaishi 16:130–134.Search in Google Scholar

Marra, G.G., Pellerin, R.F. Galligan, W.L. (1966) Nondestructive determination of wood strength and elasticity by vibration. Holz. Roh- Werkst. 24:460–466.10.1007/BF02612875Search in Google Scholar

Matsumoto, T. (1962) Studies on the dynamic modulus E and the logarithmic decrement of wood by transverse vibration. Bull. Kyushu Univ. For. 36:1–86.Search in Google Scholar

Minato, K., Akiyama, T., Yasuda, R., Yano, H. (1995) Dependence of vibrational properties of wood on varnishing during its drying process in violin manufacturing. Holzforschung 49:222–226.10.1515/hfsg.1995.49.3.222Search in Google Scholar

Murata, K., Kanazawa, T. (2007) Determination of Young’s modulus and shear modulus by means of deflection curves for wood beams obtained in static bending tests. Holzforschung 61:589–594.10.1515/HF.2007.082Search in Google Scholar

Nakao, T. (1984) Measurement of the anisotropic-shear modulus by the torsional vibration method for free-free wooden beams. Mokuzai Gakkaishi 30:877–885.Search in Google Scholar

Ono, T. (1983) Effect of grain angle on dynamic mechanical properties of wood. J. Mater. Res. Soc. Jpn. 32:108–113.Search in Google Scholar

Park, H.-M., Fushitani, M., Byeon, H.-S. (2009) Derivation and application of an equation for calculating shear modulus of three-ply laminated material beam from shear moduli of individual laminae. J. Wood Sci. 55:181–189.10.1007/s10086-008-1023-zSearch in Google Scholar

Sawada, M., Hiyajima, H., Ueda, K., Umeda, Y. (1968) Studies on mechanical properties of skis. 1. Mechanical properties of Itaya (Acer sp.) wood laminated skis. Bull. Coll. Exp. For. Hokkaido Univ. 26:107–142.Search in Google Scholar

Sobue, N. (1986) Instantaneous measurement of elastic constants by analysis of the tap tone of wood: application to flexural vibration of beams. Mokuzai Gakkaishi 32:274–279.Search in Google Scholar

Timoshenko, S.P. (1921) On the correction for shear of the differential equation for transverse vibrations of prismatic bars. Phil. Mag. 41:744–746.Search in Google Scholar

Yano, H. (1994) The changes in the acoustic properties of western red cedar due to methanol extraction. Holzforschung 48: 491–495.10.1515/hfsg.1994.48.6.491Search in Google Scholar

Yoshihara, H. (2009) Poisson’s ratio of plywood measured by tension test. Holzforschung 63:603–608.10.1515/HF.2009.092Search in Google Scholar

Yoshihara, H. (2011a) Measurement of the in-plane shear modulus of plywood by tension test of [±45] off-axis specimen. Trans. Jpn. Soc. Mech. Eng. A 77:670–678.10.1299/kikaia.77.670Search in Google Scholar

Yoshihara, H. (2011b) Measurement of the Young’s modulus and shear modulus of in-plane quasi-isotropic medium-density fiberboard by flexural vibration. BioResources 6:4871–4885.Search in Google Scholar

Yoshihara, H. (2012a) Influence of the specimen depth to length ratio and lamination construction on Young’s modulus and in-plane shear modulus of plywood measured by flexural vibration. BioResources 7:1337–1351.Search in Google Scholar

Yoshihara, H. (2012b) Off-axis Young’s modulus and off-axis shear modulus of wood measured by flexural vibration tests. Holzforschung 66:207–213.10.1515/HF.2011.118Search in Google Scholar

Yoshihara, H. (2012c) Examination of the specimen configuration and analysis method in the flexural and longitudinal vibration tests of solid wood and wood-based materials. For. Prod. J. 62:191–200.10.13073/0015-7473-62.3.191Search in Google Scholar