Article
Licensed
Unlicensed
Requires Authentication
Fractal dimension analysis of void size in wood-strand composites based on X-ray computer tomography images
-
Peng Li
and
Yubo Tao
Published/Copyright:
September 4, 2012
Abstract
Oriented strandboards were constructed from various combinations of mixed hardwood flakes. Fractal dimension of void size (FDVS) in the manufactured samples was studied by means of X-ray computer tomography images and a computer image processing technique. The FDVS value was high in the panel surface layers and decreased toward the panel center, and the FDVS decrement was linear to increased porosity. At the same overall porosity level, the FDVS varied as function of void distribution. FDVS could be a useful additional parameter for characterizing the internal void structure of strand-based wood composites.
Received: 2012-5-3
Accepted: 2012-8-9
Published Online: 2012-09-04
Published in Print: 2013-02-01
©2013 by Walter de Gruyter Berlin Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Masthead
- Masthead
- Original Articles
- Behavior of xylans from Eucalyptus species. Part 1. The influence of structural features of eucalyptus xylans on their retention in kraft pulp
- Behavior of xylans from the Eucalyptus species. Part 2. Characterization of 4-O-methylglucuronoxylans isolated from black liquors of kraft pulping of Eucalyptus grandis and E. urophylla
- Convenient preparation of a β-O-4-type lignin model trimer via KOH-catalyzed hydroxymethylation and a new protection method
- Topochemistry of heat-treated and N-methylol melamine-modified wood of koto (Pterygota macrocarpa K. Schum.) and limba (Terminalia superba Engl. et. Diels)
- Enzymatic bleaching of eucalyptus kraft pulp: effects on the prebleaching filtrate, pulp quality and paper properties
- Compressive-torsion DMA of yellow-poplar wood in organic media
- Physiomechanical properties of ultra-lightweight foam core particleboard: different core densities
- Fractal dimension analysis of void size in wood-strand composites based on X-ray computer tomography images
- Sorption isotherms of thermally modified wood
- Hot water extracted wood fiber for production of wood plastic composites (WPCs)
- Generic failure mechanisms in adhesive bonds
- Climate response of cell characteristics in tree rings of Picea crassifolia
- Performance of wood treated with prospective organic surface protectants upon outdoor exposure: FTIR spectroscopic analysis of weathered surfaces
- Short Notes
- Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy (SThM)
- Beech wood shrinkage observed at the micro-scale by a time series of X-ray computed tomographs (μXCT)
- Meetings
- Meetings
Articles in the same Issue
- Masthead
- Masthead
- Original Articles
- Behavior of xylans from Eucalyptus species. Part 1. The influence of structural features of eucalyptus xylans on their retention in kraft pulp
- Behavior of xylans from the Eucalyptus species. Part 2. Characterization of 4-O-methylglucuronoxylans isolated from black liquors of kraft pulping of Eucalyptus grandis and E. urophylla
- Convenient preparation of a β-O-4-type lignin model trimer via KOH-catalyzed hydroxymethylation and a new protection method
- Topochemistry of heat-treated and N-methylol melamine-modified wood of koto (Pterygota macrocarpa K. Schum.) and limba (Terminalia superba Engl. et. Diels)
- Enzymatic bleaching of eucalyptus kraft pulp: effects on the prebleaching filtrate, pulp quality and paper properties
- Compressive-torsion DMA of yellow-poplar wood in organic media
- Physiomechanical properties of ultra-lightweight foam core particleboard: different core densities
- Fractal dimension analysis of void size in wood-strand composites based on X-ray computer tomography images
- Sorption isotherms of thermally modified wood
- Hot water extracted wood fiber for production of wood plastic composites (WPCs)
- Generic failure mechanisms in adhesive bonds
- Climate response of cell characteristics in tree rings of Picea crassifolia
- Performance of wood treated with prospective organic surface protectants upon outdoor exposure: FTIR spectroscopic analysis of weathered surfaces
- Short Notes
- Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy (SThM)
- Beech wood shrinkage observed at the micro-scale by a time series of X-ray computed tomographs (μXCT)
- Meetings
- Meetings
