Performance of wood treated with prospective organic surface protectants upon outdoor exposure: FTIR spectroscopic analysis of weathered surfaces
-
Christoph F. Schauwecker
,
Armando G. McDonald
Abstract
Visual appeal of wood is as important as its structural integrity in outdoor applications. Discoloration and checking of wood favor the utilization of alternative materials for outdoor cladding and decking. Lignin depolymerization is one of the critical processes leading to weathering. In the present paper, the potential of different classes of surface protection agents has been assessed on loblolly pine (Pinus taeda) impregnated with water repellents, organic UV inhibitors, and an organic biocide. The treated samples were exposed to predetermined doses of solar radiation in Eastern Oregon, and the chemical changes occurring on the surfaces were evaluated by FTIR spectroscopy. After 1-year exposure, lignin loss was complete on all surfaces; however, some treatments provided longer term protection than others. Organic UV light inhibitors were most effective in this regard. A petroleum-based water repellent with a melting point of 54–58°C also provided protection against lignin degradation.
©2013 by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Masthead
- Masthead
- Original Articles
- Behavior of xylans from Eucalyptus species. Part 1. The influence of structural features of eucalyptus xylans on their retention in kraft pulp
- Behavior of xylans from the Eucalyptus species. Part 2. Characterization of 4-O-methylglucuronoxylans isolated from black liquors of kraft pulping of Eucalyptus grandis and E. urophylla
- Convenient preparation of a β-O-4-type lignin model trimer via KOH-catalyzed hydroxymethylation and a new protection method
- Topochemistry of heat-treated and N-methylol melamine-modified wood of koto (Pterygota macrocarpa K. Schum.) and limba (Terminalia superba Engl. et. Diels)
- Enzymatic bleaching of eucalyptus kraft pulp: effects on the prebleaching filtrate, pulp quality and paper properties
- Compressive-torsion DMA of yellow-poplar wood in organic media
- Physiomechanical properties of ultra-lightweight foam core particleboard: different core densities
- Fractal dimension analysis of void size in wood-strand composites based on X-ray computer tomography images
- Sorption isotherms of thermally modified wood
- Hot water extracted wood fiber for production of wood plastic composites (WPCs)
- Generic failure mechanisms in adhesive bonds
- Climate response of cell characteristics in tree rings of Picea crassifolia
- Performance of wood treated with prospective organic surface protectants upon outdoor exposure: FTIR spectroscopic analysis of weathered surfaces
- Short Notes
- Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy (SThM)
- Beech wood shrinkage observed at the micro-scale by a time series of X-ray computed tomographs (μXCT)
- Meetings
- Meetings
Articles in the same Issue
- Masthead
- Masthead
- Original Articles
- Behavior of xylans from Eucalyptus species. Part 1. The influence of structural features of eucalyptus xylans on their retention in kraft pulp
- Behavior of xylans from the Eucalyptus species. Part 2. Characterization of 4-O-methylglucuronoxylans isolated from black liquors of kraft pulping of Eucalyptus grandis and E. urophylla
- Convenient preparation of a β-O-4-type lignin model trimer via KOH-catalyzed hydroxymethylation and a new protection method
- Topochemistry of heat-treated and N-methylol melamine-modified wood of koto (Pterygota macrocarpa K. Schum.) and limba (Terminalia superba Engl. et. Diels)
- Enzymatic bleaching of eucalyptus kraft pulp: effects on the prebleaching filtrate, pulp quality and paper properties
- Compressive-torsion DMA of yellow-poplar wood in organic media
- Physiomechanical properties of ultra-lightweight foam core particleboard: different core densities
- Fractal dimension analysis of void size in wood-strand composites based on X-ray computer tomography images
- Sorption isotherms of thermally modified wood
- Hot water extracted wood fiber for production of wood plastic composites (WPCs)
- Generic failure mechanisms in adhesive bonds
- Climate response of cell characteristics in tree rings of Picea crassifolia
- Performance of wood treated with prospective organic surface protectants upon outdoor exposure: FTIR spectroscopic analysis of weathered surfaces
- Short Notes
- Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy (SThM)
- Beech wood shrinkage observed at the micro-scale by a time series of X-ray computed tomographs (μXCT)
- Meetings
- Meetings
