Quintuple band circular monopole antenna with innovative 3-D printed PLA substrate for wireless applications

References

[1] E. MacDonald, R. Salas, D. Espalin, et al., “3D printing for the rapid prototyping of structural electronics,” IEEE Access, vol. 2, pp. 234–242, 2014. https://doi.org/10.1109/access.2014.2311810.Search in Google Scholar

[2] B. Sanz-Izquierdo and E. Parker, “3-D printing of elements in frequency selective arrays,” IEEE Trans. Antenn. Propag., vol. 62, no. 12, pp. 6060–6066, 2014, https://doi.org/10.1109/tap.2014.2359470.Search in Google Scholar

[3] M. Liang, C. Shemelya, E. MacDonald, R. Wicker, and H. Xin, “3-D printed microwave patch antenna via fused deposition method and ultrasonic wire mesh embedding technique,” IEEE Antenn. Wireless Propag. Lett., vol. 14, pp. 1346–1349, 2015, https://doi.org/10.1109/lawp.2015.2405054.Search in Google Scholar

[4] I. T. Nassar and T. M. Weller, “Development of novel 3-D cube antennas for compact wireless sensor nodes,” IEEE Trans. Antenn. Propag., vol. 60, pp. 1059–1065, 2012, https://doi.org/10.1109/tap.2011.2173121.Search in Google Scholar

[5] S. Jun, B. Sanz-Izquierdo, J. Heirons, et al., “Circular polarised antenna fabricated with low-cost 3D and inkjet printing equipment,” Electron. Lett., vol. 53, pp. 370–371, 2017, https://doi.org/10.1049/el.2016.4605.Search in Google Scholar

[6] M. Rizwan, M. W. A. Khan, L. Sydänheimo, J. Virkki, and L. Ukkonen, “Flexible and stretchable brush-painted wearable antenna on a three-dimensional (3-D) printed substrate,” IEEE Antenn. Wireless Propag. Lett., vol. 16, pp. 3108–3112, 2017, https://doi.org/10.1109/lawp.2017.2763743.Search in Google Scholar

[7] What is 3D printing and how it works. Available at: http://3dprinting.com/what-is-3d-printing/ [accessed: Apr. 12, 2015].Search in Google Scholar

[8] V. Kyovtorov, I. Georgiev, and S. Margeno, “New antenna design approach – 3D polymer printing and metallization experimental test at 14–18 GHz,” Int. J. Electron. Commun., vol. 73, pp. 119–128, 2017, https://doi.org/10.1016/j.aeue.2016.12.017.Search in Google Scholar

[9] S. Y. Jun, B. Sanz-Izquierdo, E. A. Parker, D. Bird, and A. McClelland, “Manufacturing considerations in the 3-D printing of fractal antennas,” IEEE Trans. Compon. Packag. Manuf. Technol., vol. 7, pp. 1891–1898, 2017, https://doi.org/10.1109/tcpmt.2017.2730366.Search in Google Scholar

[10] S. Moscato, R. Bahr, T. Le, and M. Pasian, “Infill-dependent 3-D-printed material based on Ninja Flex filament for antenna applications,” IEEE Antenn. Wireless Propag. Lett., vol. 15, pp. 1506–1509, 2016, https://doi.org/10.1109/lawp.2016.2516101.Search in Google Scholar

[11] G. L. Huang, T. H. Chio, and T. S. Yeo, “Application of 3-D metal-direct-printing technique for waveguide antenna fabrication,” in Proceedings of 2015 IEEE International Symposium on Antenna and Propagation (APSURSI), Vancouver, Canada, 2015, pp. 316–317, https://doi.org/10.1109/aps.2015.7304544.Search in Google Scholar

[12] S. Das, P. P. Sarkar, and S. K. Chowdhury, “Design and analysis of a compact monitor-shaped multifrequency microstrip patch antenna,” J. Electromagn. Waves Appl., vol. 28, pp. 827–837, 2014, https://doi.org/10.1080/09205071.2014.892441.Search in Google Scholar

[13] D. Pal, R. Singhal, A. Joshi, and A. K. Bandyopadhyay, “Multiband planar antenna with CSRR loaded ground plane for WLAN and fixed satellite service applications,” Frequenz, vol. 74, pp. 393–399, 2020, https://doi.org/10.1515/freq-2020-0012.Search in Google Scholar

[14] S. Das, P. P. Sarkar, and S. K. Chowdhury, “Design and analysis of a compact triple band slotted microstrip antenna with modified ground plane for wireless communication applications,” Prog. Electromagn. Res. B, vol. 60, pp. 215–225, 2014, https://doi.org/10.2528/pierb14070108.Search in Google Scholar

[15] S. Das, P. P. Sarkar, and S. K. Chowdhury, “Investigations on miniaturized multifrequency microstrip patch antennas for wireless communication applications,” J. Electromagn. Waves Appl., vol. 27, pp. 1145–1162, 2013, https://doi.org/10.1080/09205071.2013.802656.Search in Google Scholar

[16] R. Patel, T. Upadhyaya, and A. Desai, “Low profile multiband meander antenna for LTE/WiMAX/WLAN and INSAT-C application,” Int. J. Electron. Commun., vol. 102, pp. 90–98, 2019, https://doi.org/10.1016/j.aeue.2019.02.010.Search in Google Scholar

[17] S. Das, P. P. Sarkar, and S. K. Chowdhury, “Modified π-shaped slot loaded multifrequency microstrip antenna,” Prog. Electromagn. Res. B, vol. 64, no. 1, pp. 103–117, 2015, https://doi.org/10.2528/pierb15090905.Search in Google Scholar

[18] A. Kaur and N. Sharma, ““A quad band circular patch antenna with fractal elements for S-band and C-band applications” by Elsevier Procedia Computer Science, Vol. 85, pp. 380–385, 2016,” Int. J. Comput. Appl., vol. 144, no. 3, pp. 1–4, 2016.10.5120/ijca2016910138Search in Google Scholar

[19] S. Lakrit, S. Das, S. Ghosh, and B. T. P. Madhav, “Compact UWB flexible elliptical CPW-fed antenna with triple notch bands for wireless communications,” Int. J. RF Microw. Computer-Aided Eng., vol. 30, 2020, Art no. e22201, https://doi.org/10.1002/mmce.22201.Search in Google Scholar

[20] M. Mirzaee, S. Noghanian, and Y. Chang, “Low-profile bowtie antenna with 3D printed substrate,” Microw. Opt. Technol. Lett., vol. 59, pp. 706–710, 2017, https://doi.org/10.1002/mop.30379.Search in Google Scholar

[21] A. W. Mohammad Saadh and R. Poonkuzhali, “A compact CPW fed multiband antenna for WLAN/INSAT/WPAN applications,” Int. J. Electron. Commer., vol. 109, pp. 119–128, 2019, https://doi.org/10.1016/j.aeue.2019.07.007.Search in Google Scholar

[22] M. A. Salamin, W. A. E. Ali, S. Das, and A. Zugari, “Design and investigation of a multi-functional antenna with variable wideband/notched UWB behavior for WLAN/X-band/UWB and Ku-band applications,” Int. J. Electron. Commun., vol. 111, p. 152895, 2019, https://doi.org/10.1016/j.aeue.2019.152895.Search in Google Scholar

[23] W. A. E. Ali, E. K. I. Hamad, and M. Z. M. Hamdallah, “Dual-band microstrip antenna for WiMAX applications using complementary split ring resonators,” in IEEE 33rd National Radio Science Conference (NRSC) 2016, At Aswan, Egypt, 2016.Search in Google Scholar

[24] M. A. Salamin, W. A. E. Ali, and A. Zugari, “A novel UWB antenna using capacitively-loaded fork-shaped resonator and modified fork-shaped DMS for interference mitigation with WiMAX and WLAN applications,” J. Instrum., vol. 14, no. 03, 2019.10.1088/1748-0221/14/03/P03008Search in Google Scholar

[25] E. K. I. Hamad, W. A. E. Ali, M. Z. M. Hamdalla, and M. A. Bassiuny, “High gain triple band microstrip antenna based on metamaterial superlens for wireless communication applications,” in 2018 International Conference on Innovative Trends in Computer Engineering (ITCE), Aswan, 2018, pp. 197–204, https://doi.org/10.1109/itce.2018.8316624.Search in Google Scholar

[26] W. A. E. Ali and A. A. Ibrahim, “Tunable band-notched UWB antenna from WLAN to WiMAX with open loop resonators using lumped capacitors,” ACES J., vol. 33, no. 6, pp. 603–609, 2018.Search in Google Scholar

[27] S. Lakrit, S. Das, A. El Alami, D. Barad, and S. A. Mohapatra, “Compact UWB monopole patch antenna with reconfigurable band-notched characteristics for Wi-MAX and WLAN applications,” Int. J. Electron. Commun., vol. 105, pp. 106–115, 2019, https://doi.org/10.1016/j.aeue.2019.04.001.Search in Google Scholar

[28] W. A. Ali, E. K. I. Hamad, M. A. Bassiuny, and M. M. M. Hamdallah, “Complementary split ring resonator based triple band microstrip antenna for WLAN/WiMAX applications,” Radioengineering, vol. 26, no. 1, pp. 78–84, 2017.10.13164/re.2017.0078Search in Google Scholar

[29] A. E. Ahmed and W. A. E. Ali, “A novel multiband Antenna with 3D-printed multicircular substrate for wireless applications,” in 2020 International Conference on Electrical, Communication, and Computer Engineering (ICECCE), Istanbul, Turkey, 2020, pp. 1–5.10.1109/ICECCE49384.2020.9179192Search in Google Scholar

[30] A. E. Ahmed and W. A. E. Ali, “Analysis and design of 3-D printed fractal triangular antenna for wireless communications applications,” in 2020 International Conference on Electrical, Communication, and Computer Engineering (ICECCE), Istanbul, Turkey, 2020, pp. 1–5, https://doi.org/10.1109/icecce49384.2020.9179333.Search in Google Scholar

[31] R. Garg, P. Bhartia, and I. Bahl, Microstrip Antenna Design Handbook, Boston, London, Artech House, 2001.Search in Google Scholar

[32] C. A. Balanis, Antenna Theory: Analysis and Design, 4th ed. U.K., John Wiley & Sons, 2005.Search in Google Scholar

[33] A. M. Ramly, N. A. Malek, and S. Y. Mohamad, “Design of a circular patch antenna for 3D printing,” in International Conference on Computer and Communication Engineering (ICCCE), 2016.10.1109/ICCCE.2016.92Search in Google Scholar

[34] A. Garhwal, M. R. Ahmad, and B. H. Ahmad, “Circular and elliptical shaped fractal patch antennas for multiple applications,” Int. J. Eng. Adv. Technol., vol. 8, no. 5, 2019, ISSN: 2249-8958.Search in Google Scholar

[35] J. Terhzaz, A. Tribak, and F. Riouch, “Novel miniaturized multiband antenna and applications for smart navigation media,” Int. J. RF Microw. Computer-Aided Eng., vol. 29, p. e21940, 2019.10.1002/mmce.21940Search in Google Scholar

[36] B. Gowrish and A. Basu, “Analysis and design of a dual-band stepped impedance PCB monopole antenna,” IETE J. Educat., vol. 58, pp. 29–38, 2017.10.1080/09747338.2017.1332495Search in Google Scholar

[37] L. Kang, X. H. Wang, H. Li, and X. W. Shi, “Planar monopole antenna with a compact radiator for tri-band applications,” Microw. Opt. Technol. Lett., vol. 57, pp. 706–709, 2015, https://doi.org/10.1002/mop.28936.Search in Google Scholar

[38] S. Ullah, F. Faisal, A. Ahmad, U. Ali, F. A. Tahir, and J. A. Flint, “Design and analysis of a novel tri-band flower-shaped planar antenna for GPS and WiMAX applications,” J. Electromagn. Waves Appl., vol. 31, pp. 927–940, 2017, https://doi.org/10.1080/09205071.2017.1330160.Search in Google Scholar

[39] R. S. Brar, K. Saurav, D. Sarkar, and K. V. Srivastava, “A quad-band dual-polarized monopole antenna for GNSS/UMTS/WLAN/WiMAX applications,” Microw. Opt. Technol. Lett., vol. 60, pp. 538–545, 2018, https://doi.org/10.1002/mop.31008.Search in Google Scholar