Remnant Mode Conversion Noise Suppression Using a Surface Mount Device Capacitor
-
Seungjin Lee
,
Jaehyuk Lim
Abstract
A novel scheme to suppress the remnant mode conversion noise with a surface mount device (SMD) capacitor on dual back-to-back bent differential lines is proposed. To suppress the remnant mode conversion noise, an additional SMD capacitor is loaded on the differential lines between two bends to equalize even- and odd-mode velocities. The mode conversion noise suppression characteristics of the proposed scheme were analyzed and compared with various schemes. Also, eye diagrams confirmed that the addition of the SMD capacitor suppressed remnant mode conversion noise while preserving differential signal quality in dual back-to-back bent differential lines.
Funding statement: This work was supported in part by Basic Science Research Program through the National Research Foundation of Korea funded by the Ministry of Education under Grant NRF-2018R1D1A1B07049347.
References
[1] S. H. Hall, G. W. Hall, and J. A. McCall, High-speed Digital System Design: A Handbook of Interconnect Theory and Design Practices. New York: Wiley, 2000.Suche in Google Scholar
[2] T.-L. Wu, F. Buesink, and F. Canavero, “Overview of signal integrity and EMC design technologies on PCB: Fundamentals and latest progress,” IEEE Trans. Electromagn. Compat., vol. 55, no. 4, pp. 624–638, May., 2013.10.1109/TEMC.2013.2257796Suche in Google Scholar
[3] B. Archambeault, J. C. Diepenbrock, and S. Connor, “Emi emissions from mismatches in high speed differential signal traces and cables,” in Electromagn. Compat., 2007. EMC 2007. IEEE Int. Symp. on, IEEE, pp. 1–6, 2007.10.1109/ISEMC.2007.233Suche in Google Scholar
[4] X. Duan et al., “Em emission of differential signals across connected printed circuit boards in the ghz range,” in Electromagn. Compat., 2009. EMC 2009. IEEE Int. Symp. On, IEEE, pp. 50–55, 2009.10.1109/ISEMC.2009.5284616Suche in Google Scholar
[5] C.-H. Chang, R.-Y. Fang, and C.-L. Wang, “Bended differential transmission line using compensation inductance for common-mode noise suppression,” IEEE Trans. Compon. Packag. Manuf. Technol., vol. 2, no. 9, pp. 1518–1525, 2012.10.1109/TCPMT.2012.2192439Suche in Google Scholar
[6] D.-B. Lin. “Signal integrity of bent differential transmission lines,” Electron. Lett., vol. 40, no. 19, pp. 1191–1192. 2004.10.1049/el:20045322Suche in Google Scholar
[7] L.-S. Wu, J.-F. Mao, and W.-Y. Yin, “Slow-wave structure to suppress differential-to-common mode conversion for bend discontinuity of differential signaling,” in Elect. Des. Adv. Packag. Syst. Symp. (EDAPS), 2012 IEEE, IEEE, pp. 219–222, 2012.Suche in Google Scholar
[8] C. Gazda et al., A wideband common-mode suppression filter for bend discontinuities in differential signaling using tightly coupled microstrips. IEEE Trans. Adv. Packag., vol. 33, no. 4, pp. 969–978. Nov., 2010.10.1109/TADVP.2010.2077287Suche in Google Scholar
[9] G.-H. Shiue et al., “Noise reduction using compensation capacitance for bend discontinuities of differential transmission lines,” IEEE Trans. Adv. Package., vol. 29, no. 3, pp. 560–569, 2006.10.1109/TADVP.2006.875413Suche in Google Scholar
[10] G. H. Shiue et al., “Analysis of common mode noise for weakly coupled differential serpentine delay microstrip line in high-speed digital circuits,” IEEE Trans. Electromagn. Compat.,” vol. 54, no. 3, pp. 655–666, Jun., 2012.10.1109/TEMC.2011.2173765Suche in Google Scholar
[11] F. D. Mbairi, W. P. Siebert, and H. Hesselbom, “On the problem of using guard traces for high frequency differential lines crosstalk reduction,” IEEE Trans. Compon. Packag. Tech., vol. 30, no. 1, pp. 67–74, Apr., 2009.10.1109/TCAPT.2007.892072Suche in Google Scholar
© 2020 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Research Articles
- Wilkinson Power Divider with Band-pass Filtering Response and Harmonics Suppression Using Open and Short Stubs
- Design of Compact Highpass Filter for 5G mm-wave Applications Using Complementary Split Ring Resonator
- Wide-angle Frequency Scanning Antenna Achieved by Leaking Spoof Surface Plasmon Polariton
- A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)
- Closed Loop Resonator Based Compact UWB Antenna with Single Notched Band Varying between WLAN and X-band for UWB Applications
- Remnant Mode Conversion Noise Suppression Using a Surface Mount Device Capacitor
- Designing Modern Compact Microstrip Planar Quadband Bandpass Filter for Hand Held Wireless Applications
Artikel in diesem Heft
- Frontmatter
- Research Articles
- Wilkinson Power Divider with Band-pass Filtering Response and Harmonics Suppression Using Open and Short Stubs
- Design of Compact Highpass Filter for 5G mm-wave Applications Using Complementary Split Ring Resonator
- Wide-angle Frequency Scanning Antenna Achieved by Leaking Spoof Surface Plasmon Polariton
- A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)
- Closed Loop Resonator Based Compact UWB Antenna with Single Notched Band Varying between WLAN and X-band for UWB Applications
- Remnant Mode Conversion Noise Suppression Using a Surface Mount Device Capacitor
- Designing Modern Compact Microstrip Planar Quadband Bandpass Filter for Hand Held Wireless Applications
