Startseite Reference Plane Transformation of Continuous Mode Terminations for Broadband Power Amplifiers
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Reference Plane Transformation of Continuous Mode Terminations for Broadband Power Amplifiers

  • Sebastian Preis EMAIL logo , Daniel Gruner , Ahmed Sayed , Paul Saad und Georg Boeck
Veröffentlicht/Copyright: 19. August 2014
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

In this article the behavior of continuous mode amplifiers at different reference planes is discussed using the example of a continuous class-F−1 amplifier mode. The variation of the output impedances and the conversion of the output voltage and current waveforms are analyzed depending on the considered reference plane. For instance, the frequently discussed current source reference plane has a way different impedance characteristic than the accessible lead reference plane. In order to study this aspect, a broadband continuous class-F−1 mode amplifier has been realized using a bare-die GaN-HEMT. From 1.0 to 1.8 GHz, this amplifier attains 44.5–45.2 dBm output power with corresponding drain efficiency of 65–68%.

PACS: 84.30.Le
Received: 2013-7-23
Published Online: 2014-8-19
Published in Print: 2014-9-30

©2014 by Walter de Gruyter Berlin/Boston

Heruntergeladen am 30.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/freq-2013-0103/html?lang=de
Button zum nach oben scrollen