Home Technology Design of Cathode Heater Assembly for High Power Gyrotron
Article
Licensed
Unlicensed Requires Authentication

Design of Cathode Heater Assembly for High Power Gyrotron

  • EMAIL logo , , , and
Published/Copyright: April 11, 2013
Become an author with De Gruyter Brill

Abstract

A 3D model of dispenser cathode with toroid shape heater assembly is simulated using simulation software, ANSYS Multi-physics. The reported design study of cathode heater assembly of 1 MW 120 GHz gyrotron helps to optimize the input heater power with respect to cathode surface temperature. The simulation study shows that the input power depends strongly on the heater dimension as well as material properties including the potting material. The optimum input power helps to achieve desired current density (10 A/cm2) and cathode surface temperature (1000 °C). Further, the thermal and structural analyses are carried out to study the temperature distribution on the cathode assembly due to the heat dissipation and mechanical strength of the assembly.


Gyrotron Laboratory, Microwave Tube Area, CSIR–Central Electronics Engineering Research Institute (CEERI), Pilani, Rajasthan, 333031, India

Received: 2012-07-27
Published Online: 2013-04-11
Published in Print: 2013-04-13

©[2013] by Walter de Gruyter Berlin Boston

Downloaded on 1.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/freq-2012-0097/html
Scroll to top button