Plasticity of semi-crystalline polymers: crystal slip versus melting-recrystallization

Articles in the same Issue

1. Dynamic Simulation and Modelling of Bulk Polymerization of Ethylene Using Bi-functional initiators
2. In Vacuum Preparation of Psy-cl-poly(AAm) Superabsorbent and its Applications in Oil - Industry
3. Synthesis, Chemical Structure and Properties of Crosslinked Poly(esterurethanes) Based on Unsaturated Oligo(alkyleneester)diols
4. Improvements in Essential Electrical and Physical Properties of Phenol Formaldehyde Resin by Incorporation of Modified Coal Tar Pitch
5. New epoxy-ionic liquid dispersions. Room temperature ionic liquid as lubricant of epoxy resin-stainless steel contacts
6. Synthesis and photophysical properties of fluorescent polystyrene containing 1,8-naphthalimide via atom transfer polymerization
7. Plasma Polymerization of Amines and Acetone: Functionalized Surfaces for Microarray Applications
8. Rheological Properties of Calcium Carbonate-Epoxidized Natural Rubber Composites Prepared In Latex State
9. Synthesis of Imidazole End-Capped Poly(n-butyl methacrylate)s via Atom Transfer Radical Polymerization with a new functional initiator containing imidazolium group
10. Polymer Characterization by Electrospray-Mass- Spectrometry – shifting the upper mass limit
11. Self-Assembly of Methacrylic Nanostructured Copolymers Containing Polyhedral Oligomeric Silsesquioxanes
12. Polyaniline-modified Montmorillonite Nanocomposite as an Actuator
13. Molecularly Imprinted Polymers for Selective Adsorption of Cholesterol from Aqueous Environment
14. Infinite dilution diffusion coefficients of organic solvents in nascent polyethylene particles by inverse gas chromatography measurements
15. Morphological features of PU/PMMA hybrid latex prepared by Miniemulsion Polymerization
16. Analysis of Water Adsorption on Chitosan and Its Blends with Hydroxypropylcellulose
17. Modeling of Nonlinear Viscoelastic Creep of Polycarbonate
18. Stability and particle size of polypyrrole dispersion using sodium dodecylbenzenesulfonate as surfactant
19. Thermoresponsive hydrogels of hydrophobically modified polyglycidol
20. Investigation of Poly(vinyl pyrrolidone) in methanol by dynamic light scattering and viscosity techniques
21. Fracture toughness of controlled-rheology polypropylenes
22. Electrical performance and stability of polypyrrole coated PET fibres
23. Effect of Vibration on Drawing and Annealing of High- Speed Spun Poly(trimethylene terephthalate) Fiber
24. On the use of hyperbranched aramids as support of Pt nanoparticles
25. Comparison Of Reaction Pathway And Product Analysis For Hydroxyalkylation Of Parabanic Acid With Oxiranes And Alkylene Carbonates
26. Construction of an arranged nano-fibrous structure by selforganization of a designed amphiphilic peptide based on β- strand
27. Polypropylene/montmorillonite Nanocomposites for Food Packaging
28. Synthesis and characterization of new macromolecule systems for colon-specific drug delivery
29. Poly(methyl acrylate) plus Mesoporous Silica Nanohybrids: Mechanical and Thermophysical Properties
30. Zwitterionic Polyelectrolytes: A Review
31. Effects of chemical structure and plasma treatment on the surface properties of polysulfones
32. Plasticity of semi-crystalline polymers: crystal slip versus melting-recrystallization
33. Characterization of Genipin Crosslinked Hydrogels Composed of Chitosan and Partially Hydrolyzed Poly(vinyl alcohol)
34. Rheological properties of grafted maleic anhydride based polypropylene composites filled with organoclay and glass fibers
35. Molten Salt as a Green Reaction Medium: Synthesis of Polyureas Containing 4-phenylurazole Moiety in the Main Chain in the Presence of Tetrabutylammonium bromide as an Ionic Liquid
36. Synthesis, characterization and properties of polymers containing simultaneously the imine and amide moieties.
37. Electrical Behavior of High Density Polyethylene/ZnO Nano-composites
38. Synthesis, Characterization, and Performance Evaluation of Polymeric Hindered Amine Light Stabilizers (HALS) in EPDM
39. Comparative studies of functional nanostructures sputtered on polypropylene nonwovens
40. Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization of Vinyl Monomers Initiated by Poly(methyl methacrylate) Peroxide
41. Synthesis of α,ω-bis(3-aminopropyldiethoxylsilane) Poly(tri fluoropropylmethyl)siloxanes
42. Gas sensing property of a conducting copolymer
43. A Novel pH and Thermo-sensitive N,O-Carboxymethyl Chitosan-graft-Poly(N-isopropylacrylamide) Hydrogel for Controlled Drug Delivery
44. Effect of addition of organic solvents on properties of the chemically synthesized polyaniline in aqueous solutions
45. Novel Polymerization of Myrcene in Aqueous Media via Cyclodextrin-Complexes
46. Application possibilities of preparative size exclusion chromatography to analytical problems in polymer science
47. Residual Stress and Rheological Behavior of Polymeric Nanocomposites
48. Synthesis and characterization of the polyacrylate latex functionalized by fluorine and silicon
49. A novel hyperbranched polyester based on 2,2-bis(hydro xylmethyl)butyric acid: synthesis and characterization
50. Preparation of fluorescent poly(methylmethacrylate) nano capsules via internal phase separation
51. Thermal Stability and Aging Characteristics of HNBR/Clay Nanocomposites in Air, Water and Oil at Elevated Temperature
52. Preparation, Morphology and Thermal Properties of Rubber-Modified Polyester Resins
53. Mechanism of sintering of polyoxymethylene powders investigated by small-angle X-ray scattering
54. Synthesis and stimuli-responsive properties of Polyacrylic acid and Polyacrylamide Trapped with Polysodium-pstyrenesulfonate semi-IPN hydrogels
55. Adsorption Behaviour of Methylene Blue from Aqueous Solution on Poly(Ethylene Terephthalate)-g-4-Vinylpyridine/ 2-Hydroxyethylmethacrylate Fibers
56. Storage Modulus of Poly(vinyl alcohol) Gels Loaded with Polyelectrolyte Particles
57. The effect of aliphatic chain length on thermal properties of poly(alkylene dicarboxylate)s
58. Performance Improvement of Nano-silica/Polypropylene Composites through in-situ Graft Modification of Nanoparticles during Melt Compounding
59. Synthesis of cationic flocculants based on acrylamide and [2-(acryloyloxy)ethyl]trimethylammonium chloride copolymers by semicontinuous inverse microemulsion polymerization. Part III: influence of HLB and surfactant blend concentration on flocculating performance
60. Fatigue Crack Growth Process in CPVC Pipe Couplings
61. Preparation and characterization of sugarcane bagasse hemicellulosic derivatives containing quaternary ammonium groups in various media
62. Modification of Polymeric Materials via Surface-Initiated Controlled/”Living” Radical Polymerization
63. Charge transport and conductivity measurement in polyaniline-poly(vinyl acetate) blends
64. Polymerization of acrylic and methacrylic monomers using CF₃OC(O)OO(O)COCF₃ as radical initiator
65. High temperature reaction between poly(glycolic acid) and ε-caprolactone in ionic liquids
66. Copolymerization of two bromine containing methacrylate monomers with methylmethacrylate. Determination of reactivity ratios by in situ quantitative ¹H NMR monitoring
67. Effects of chemical structure on the electrical properties of some polymers with imidic structure
68. Bioactive cellulose fibres with silver nanoparticles
69. A novel low k thin film based on plasma-polymerized 1- cyano isoquinoline
70. Use of chemically modified poly(ethylene terephthalate)-g- (acryl amide) fibers for α-amylase immobilization
71. Precipitation and surface polymerizations of aniline at different aniline:oxidizer molar ratios
72. The study of synthesis of poly(ethylene oxide)-b-poly(N,Ndimethylacrylamide) by atom transfer radical polymerization and self-assembly in selective solvents
73. On heat regimes of anion-activated polymerization of ε- caprolactam
74. Structure and properties of styrene-butadiene rubber/ pristine clay nanocomposites prepared by latex compounding method
75. Synthesis of resin I: salicylic acid, hexamethylene diamine and formaldehyde and its ion-exchange properties
76. Highly gas permselective polyetherketone hollow fibre membranes using aqueous sulfuric acid solution as coagulant
77. Novel poly(fluorene-alt-squaraine) derivatives having large coverage with solar spectrum
78. Synthesis and characterization of thermosensitive hydrogels with both supramolecular and hyperbranched structures
79. Preparation and characterization of styrene-methyl methacrylate In deproteinized natural rubber latex (SMMADPNR)
80. Solvency effect of the dispersion medium on the radical polymerization of styrene in non-aqueous dispersion media
81. The synthesis and capacitive properties of poly(3,4- ethylene dioxythiophene)/poly(styrene-sulfonate) and poly (acrylamide) conducting hydrogels
82. Preparation of highly stable polypyrrole dispersions in the mixed aqueous solution of sodium dodecyl sulfate and polyvinyl pyrrolidone
83. Concrete + polyester + CaCO₃: Mechanics and morphology after gamma irradiation
84. Preparation of (tri-isopropoxidesilane)-acrylate latex and the properties of its film formed in room temperature
85. Partition of tert-dodecyl mercaptan in systems containing styrene, polystyrene, and polybutadiene. Its effect on the macromolecular characteristics of high-impact poly styrene
86. Temperature-responsive hydrogels containing new LCST methacrylate macromonomers
87. Poly(styrene/α-tertbutoxy-ω-vinylbenzyl-polyglycidol) micro spheres for the preparation of novel photonic crystals
88. Optically active polymer: synthesis and characterization of new optically active poly (hydrazide-imide)s incorporating L- leucine
89. Synthesis and cellular uptake of superparamagnetic dextran-nanoparticles with porphyrinic motifs grafted by esterification
90. Mechanical properties of thin microcellular PET sheet
91. Surface-Ionized thermosensitive poly(N-isopropylacryl amide) hydrogels with faster response
92. Synthesis of azobenzene-centered (co)polymers via reversible addition-fragmentation chain transfer (RAFT) polymerization
93. A new way of step-mass-thermal transferring to control phase inversion for polyacrylonitrile(PAN)/DMSO/water system
94. Synthesis and radical polymerizations of acrylamides having Gabapentin moieties
95. The study on effective thermal conductivity of carbon foam based on fractal theory
96. Synthesis and characterization of poly(ethylene-vinyl alcohol)-g-poly(phenyl ethyl methacrylate) copolymers by a grafting onto method
97. Dynamics of Complexation of a Charged Dendrimer by Linear Polyelectrolyte: Computer Modelling
98. Microencapsulation of n-hexadecane as phase change material by suspension polymerization
99. Synthesis, characterization and kinetics of hydrophobically associating polyacrylamide
100. Influence of Ionic Liquids on the Free Radical Copolymerization of Styrene with Acrylonitrile
101. Novel blocked functionality copolymers as surface coatings in DNA microarray technology
102. Kinetics modeling of the reaction for an Epoxy/PMMA/MMT ternary system
103. Preparation of polyaniline/Fe₂O₃ composite dispersions in the presence of dodecylbenzene sulfonic acid
104. Synthesis and characterization of carboxyl endfunctionalized poly(methylidene malonate 2.1.2)
105. Electrospinning of polyamide 6/modified-keratin blends
106. Non-isothermal crystallization kinetics of Poly(phenylene sulfide)/hyperbrtanched Poly(phenylene sulfide) blends
107. Preliminary testing of silicone-urethane elastomers as substrates in human cell culture
108. The free volume in two untreated, pressure-densified, and CO₂ gas exposed polymers from positron lifetime and pressure-volume-temperature experiments
109. Static light scattering and transmission microscopy study of dilute Nafion solutions
110. Second-order nonlinear optical properties of polyphosphazenes containing multi-dipolar and imidazolebased chromophores
111. Guar gum as filler in unsaturated polyester composites
112. Preparation and characterization of sulfone-based polyimide nanofoams grafted with poly(propylene glycol)
113. Bimodality and Increased Amount of Crosslinker Enhances Tensile Properties of the Silicone Networks
114. A New Accurate Neural Network Quantitative Structure- Property Relationship for Prediction of θ (Lower Critical Solution Temperature) of Polymer Solutions
115. Conductivity and Thermal Analysis Studies of Solid Polymeric Electrolytes Based on Plasticized Hydroxyethyl Cellulose
116. The effect of attapulgite on crystallization behavior of Poly(ethylene terephthalate) (PET)/Attapulgite (AT) nano composites
117. Morphological and chromatographic characterization of molecularly imprinted monolithic columns.
118. Synthesis and Characterization of Porous Crosslinked Copolymers for Oil Spill Sorption
119. Development of High Refractive Index Plastics
120. Particle Morphology of Epoxidised Natural Rubber Latex Prevulcanized by Peroxide System
121. Study of Mechanical Properties and Morphology of PA 6/PO Blends Compatibilized by PO Grafted with Itaconic Acid
122. Modeling of Precipitation Polymerization I: The Method of Finite Molecular Weight Moments
123. On polyamide 6-montmorillonite nanocomposites obtained by in-situ polymerization
124. Novel acrylic copolymers: synthesis, characterization and antimicrobial studies.
125. Influence of Electron Beam Irradiation on PP/Clay Nanocomposites Prepared by Melt Blending
126. Preparation, Characterization and Swelling Behaviours of a Novel Multifunctional Superabsorbent Composite Based on Ca-Montmorillonite and Sodium Humate
127. Studies of silicon-containing maleimide polymers. Part II: Synthesis and properties of poly(styrene-co-brominecontaining maleimide).
128. Novel results and potential applications of bitumen used as an additive for polyethylene
129. Comparison of the structure and thermal properties of a poly(aryl ether ketone ether ketone naphthyl ketone) with those of poly(aryl ether ketone ether ketone ketone)
130. Temperature Dependent Dynamic Mechanical Properties of Hydrogenated Nitrile Butadiene Rubber and the Effect of Peroxide Cross-linkers
131. Polypropylene/Waste Ground Rubber Tire Powder Foams: A Study of the Relationship Between Processing and Structure Using Supercritical Carbon Dioxide
132. Preparation and Characterization of PVA/Boron Polymer Produced by an Electrospinning Technique.
133. Sulphonated Poly(ethylene terephthalate)/Poly(3-hydroxy butyrate) Blends: Miscibility, Thermal Behavior, and Specific Interactions
134. Porous 4-Vinylpyridine-Divinylbenzene Copolymers– Varying Porosity in Different Bead Sizes of a Single Batch
135. Radical copolymerization of styrene and acrylonitrile in the presence of oligooxyethylene azoester
136. RAFT Polymerization of Styrene Using Dithioester with Anthracene Z Group as Chain Transfer Agent
137. Synthesis and characterization of methoxy poly(ethylene glycol)-b-poly(DL-lactide-co-glycolide-co-ε-caprolactone) di block copolymers: Effects of block lengths and compositions
138. Structure and Mechanical Behavior of Isotactic Polypropylene Composites Filled with Silver Nanoparticles
139. Microwave-assisted solid-state sulphation of starch
140. Synthesis and bharacterization of poly(vinyl alcohol)-boric acid beads from PVA with several hydrolysis degrees
141. Investigation of the properties of PBT/ABS-g-GMA blends modified with epoxy resin of mid-molecular weights
142. Study of the effect on conductivity and its uniform distribution in injection molded composite polymer bipolar plate
143. Thermotropic Behaviour of Liquid Crystalline Poly[n-(4’- cyanophenyl-4’’-phenoxy)alkyl acrylate] Gels in the Dry and Swollen States
144. Preparation and Characterization of PVA/Zinc Acetate/ Boron Composite Fibers
145. Novel rapid response clay/poly(N-isopropylacrylamide) nanocomposite hydrogels by post treatment with HCl solution
146. Flexible Fluid Pump Using Magnetic Composite Gels
147. Synthesis and complete NMR characterization of methacrylateendcapped poly(ortho-esters)
148. Simple Derivation of the First Cumulant for the Rouse Chain
149. Effect of temperature and pH on swelling behavior of hydroxyethyl cellullose-acrylamide hydrogel
150. Structure and Mechanical Properties of Carboxylated Styrene-Butadiene Rubber (XSBR)/Pristine Clay Nanocomposites
151. A Novel Poly(amido amine) with Methoxy Carbonyl Groups and High Charge Density: Synthesis and Nanoscopic Selfassembly with Polyanion
152. Water-Flooding Fluid Diversion Copolymeric Microsphere Prepared by Inverse Suspension Polymerization