Investigating Three Different Models for Simulation of the Thermal Stage of an Industrial Split-Flow SRU Based on Equilibrium-Kinetic Approach with Heat Loss
-
Mohammad Hossein Kardan
Abstract
Modified Claus process is the most important process that recovers elemental sulfur from H2S. The thermal stage of sulfur recovery unit (SRU), including the reaction furnace (RF) and waste heat boiler (WHB), plays a critically important role in sulfur recovery percentage of the unit. In this article, three methods including kinetic (PFR model), equilibrium and equilibrium-kinetic models have been investigated in order to predict the reaction furnace effluent conditions. The comparison of results with industrial data shows that kinetic model (for whole the thermal stage) is the most accurate model for simulation of the thermal stage of the industrial split-flow SRU. Mean absolute percentage error for the considered kinetic model is 4.59 %. For the first time, the consequences of considering heat loss from the reaction furnace on calculated molar flows are studied. The results show that considering heat loss only affects better prediction of some effluent molar flow rates such as CO and SO2, and its effect is not significant on the results. Eventually the effects of feed preheating on some important parameters like sulfur conversion efficiency, H2S to SO2 molar ratio and important effluent molar flows are investigated. The results indicate that feed preheating will reduce the sulfur conversion efficiency. It is also noticeable that by reducing the feed temperature to 490 K, H2S/SO2 molar ratio reaches to its optimum value of 2.
Nomenclature
| A | Frequency factor | |
| Cj | [mole m-3] | Concentration of component j |
| Cp | [J mol-1 K-1] | Specific heat capacity |
| D | [m] | Furnace Internal diameter |
| Ea | [J mole-1] | Activation energy |
| Fj | [mole s-1] | Molar flow rate of component j |
| Ft | [mole s-1] | Total molar flow rate |
| g | [m s-2] | Acceleration of gravity |
| Gt | [j] | Free Gibbs energy |
| h | [W m-2.K] | Heat transfer coefficient |
| [j mole-1] | Enthalpy of reaction i | |
| K | Reaction rate constant | |
| L | [m] | Characteristic length |
| Nu | Nusselt number | |
| P | [pa] | Pressure |
| Pr | Prandtl number | |
| qc | [W m-1] | Rate of convection heat transfer (per unit length) |
| qr | [W m-1] | Rate of radiation heat transfer (per unit length) |
| r | [mole m-3 s] | Rate of reaction |
| positive error factor | ||
| R | [j mole-1 K-1] | Universal gas constants |
| Re | Reynolds number | |
| T | [K] | Temperature |
| U | [W m-2.K] | Overall heat transfer coefficient |
| total number of atoms of element k in component i | ||
| Gas absorptivity | ||
| Gas emissivity | ||
| [kg m-1s-1] | Gas viscosity | |
| Stoichiometric coefficient of component i in reaction j | ||
| ρ | [kg m-3] | Gas density |
| [W m-2 K-4] | Stefan-Boltzman constant |
References
[1] Britannica E. Phenol: encyclopaedia Britannica online academic edition. United States: Encyclopædia Britannica Inc, 2012 .Suche in Google Scholar
[2] Karan K, Mehrotra AK, Behie LA. Including radiative heat transfer and reaction quenching in modeling a Claus plant waste heat boiler. Ind Eng Chem Res. 1994;33:2651–5.10.1021/ie00035a016Suche in Google Scholar
[3] Gamson B, Elkins R. Sulfur from hydrogen sulfide. Chem Eng Prog. 1953;49:203–15.Suche in Google Scholar
[4] Bennett H, Meisen A. Hydrogen sulphide—air equilibria under claus furnace conditions. Can J Chem Eng. 1973;51:720–4.10.1002/cjce.5450510616Suche in Google Scholar
[5] Monnery WD, Svrcek WY, Behie LA. Modelling the modified claus process reaction furnace and the implications on plant design and recovery. Can J Chem Eng. 1993;71:711–24.10.1002/cjce.5450710509Suche in Google Scholar
[6] ZareNezhad B, Hosseinpour N. Evaluation of different alternatives for increasing the reaction furnace temperature of Claus SRU by chemical equilibrium calculations. Appl Thermal Eng. 2008;28:738–44.10.1016/j.applthermaleng.2007.06.014Suche in Google Scholar
[7] Otadi M, Goharrokhi M, Abadi RR 2011. Modeling of reactor furnace of Sulfur recovery units from acidic gases. 2nd International Conference on Chemical Engineering and Applications IPCBEE.Suche in Google Scholar
[8] Pollock AE. Kinetic modeling of a modified Claus reaction furnace. University of Calgary. Ph.D thesis, Univesity of Calgary, Alberta, Canada, 2001 .Suche in Google Scholar
[9] Schoneberger J, Arellano-Garcia H, Thielert H, Wozny G. An efficient approach to robust simulation of claus processes in coking plants. Comput Aided Chem Eng. 2007;24:521.10.1016/S1570-7946(07)80110-6Suche in Google Scholar
[10] Jones D, Bhattacharyya D, Turton R, Zitney SE. Rigorous kinetic modeling and optimization study of a modified claus unit for an integrated gasification combined cycle (IGCC) power plant with CO2 capture. Ind Eng Chem Res. 2012;51:2362–75.10.1021/ie201713nSuche in Google Scholar
[11] Manenti F, Papasidero D, Frassoldati A, Bozzano G, Pierucci S, Ranzi E. Multi-scale modeling of Claus thermal furnace and waste heat boiler using detailed kinetics. Comput Chem Eng. 2013;59:219–25.10.1016/j.compchemeng.2013.05.028Suche in Google Scholar
[12] Asadi S, Hamed Mosavian MT, Ahmadpour A. Effect of O2 concentration on the reaction furnace temperature and sulfur recovery using a TSWEET® process simulator. J Chem Eng Process Technol. 2013;4:152.Suche in Google Scholar
[13] Nabikandi NJ, Fatemi S. Kinetic modelling of a commercial sulfur recovery unit based on Claus straight through process: comparison with equilibrium model. J Ind Eng Chem. 2015;30:50–63.10.1016/j.jiec.2015.05.001Suche in Google Scholar
[14] Pahlavan M, Fanaei Shykholeslami MA. Modeling and simulation of Claus unit reaction furnace. Iran J Oil Gas Sci Technol. 2016;5:42–52Suche in Google Scholar
[15] Zarei S, Ganji H, Sadi M, Rashidzadeh M. Kinetic modeling and optimization of Claus reaction furnace. J Nat Gas Sci Eng. 2016a;31:747–57.10.1016/j.jngse.2016.03.086Suche in Google Scholar
[16] Zarei S, Ganji H, Sadi M, Rashidzadeh M. Thermo-kinetic modeling and optimization of the sulfur recovery unit thermal stage. Appl Thermal Eng. 2016b;103:1095–104.10.1016/j.applthermaleng.2016.05.012Suche in Google Scholar
[17] Keshavarz E, Toghraie D, Haratian M. Modeling industrial scale reaction furnace using computational fluid dynamics: a case study in Ilam gas treating plant. Appl Thermal Eng. 2017;123:277–89.10.1016/j.applthermaleng.2017.05.079Suche in Google Scholar
[18] Ibrahim S, Rahman RK, Raj A. Effects of H2O in the feed of sulfur recovery unit on sulfur production and aromatics emission from Claus furnace. Ind Eng Chem Res. 2017;56:11713–25.10.1021/acs.iecr.7b02553Suche in Google Scholar
[19] Kazempour H, Pourfayaz F, Mehrpooya M. Modeling and multi-optimization of thermal section of Claus process based on kinetic model. J Nat Gas Sci Eng. 2017;38:235–44.10.1016/j.jngse.2016.12.038Suche in Google Scholar
[20] Hawboldt KA. Kinetic modelling of key reactions in the modified Claus plant front end furnace. Ph.D thesis, University of Calgary, Alberta, Canada, 1998 .Suche in Google Scholar
[21] Nasato LV, Karan K, Mehrotra AK, Behie LA. Modeling reaction quench times in the waste heat boiler of a Claus plant. Ind Eng Chem Res. 1994;33:7–13.10.1021/ie00025a002Suche in Google Scholar
[22] Sames J, Paskall H. Simulation of reaction furnace kinetics for split-flow sulphur plants. Sulphur Recovery 1990 Sulphur '85 Conference, London, England.Suche in Google Scholar
[23] Karan K. An experimental and modeling study of homogeneous gas phase reactions occurring in the modified claus process. . Ph.D thesis, University of Calgary, Alberta, Canada, 1998Suche in Google Scholar
[24] Monnery WD, Hawboldt KA, Pollock A. New experimental data and kinetic rate expression for the Claus reaction. Chemical Engineering Science. 2000;55(21):5141–8.10.1016/S0009-2509(00)00146-9Suche in Google Scholar
[25] Clark NI, Clark PD. Kinetic Modeling of the Reaction between Hydrogen and Sulfur and Opposing H2S Decomposition at High Temperatures. Industrial and Engineering Chemistry Research. 1999;38(4):1369–75.10.1021/ie980293tSuche in Google Scholar
[26] Karan K, Mehrotra AK, Behie LA. On reaction kinetics for the thermal decomposition of hydrogen sulfide. AIChE journal. 1999;45(2):383–9.10.1002/aic.690450217Suche in Google Scholar
[27] Fogler HS. Elements of chemical reaction engineering. New Jersey: Prentice-Hall International, Inc., New Jersey, 1999Suche in Google Scholar
[28] Manenti F, Papasidero D, Bozzano G, Ranzi E. Model-based optimization of sulfur recovery units. Comput Chem Eng. 2014;66:244–51.10.1016/j.compchemeng.2014.01.019Suche in Google Scholar
© 2019 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Research Articles
- Effect of Pin-Fin Geometry on Microchannel Performance
- Study of Process Factor Effects and Interactions in Synthesis Gas Production via a Simulated Model for Glycerol Steam Reforming
- Robust Prediction of Filtrate Flux for Separation of Catalyst Particles from Wax Effluent of Fischer-Tropsch Bubble Column Reactor via Regularization Network
- Modelling and Simulation of Multiphase Flow Applicable to Processes in Oil and Gas Industry
- CH4 Direct Reduction of In-Flight Fe3O4 Concentrate Particles
- Determination of Optimum Concentration of Nanofluid for Process Intensification of Heat Transfer Using Corrugated Plate Type Heat Exchanger
- Investigating Three Different Models for Simulation of the Thermal Stage of an Industrial Split-Flow SRU Based on Equilibrium-Kinetic Approach with Heat Loss
- Analytical Design of Enhanced Fractional Filter PID Controller for Improved Disturbance Rejection of Second Order Plus Time Delay Processes
Artikel in diesem Heft
- Research Articles
- Effect of Pin-Fin Geometry on Microchannel Performance
- Study of Process Factor Effects and Interactions in Synthesis Gas Production via a Simulated Model for Glycerol Steam Reforming
- Robust Prediction of Filtrate Flux for Separation of Catalyst Particles from Wax Effluent of Fischer-Tropsch Bubble Column Reactor via Regularization Network
- Modelling and Simulation of Multiphase Flow Applicable to Processes in Oil and Gas Industry
- CH4 Direct Reduction of In-Flight Fe3O4 Concentrate Particles
- Determination of Optimum Concentration of Nanofluid for Process Intensification of Heat Transfer Using Corrugated Plate Type Heat Exchanger
- Investigating Three Different Models for Simulation of the Thermal Stage of an Industrial Split-Flow SRU Based on Equilibrium-Kinetic Approach with Heat Loss
- Analytical Design of Enhanced Fractional Filter PID Controller for Improved Disturbance Rejection of Second Order Plus Time Delay Processes
