Abstract
Ultrasonic processing is an effective tool to attain required mixing while providing the necessary activation energy in the field of biofuels. In this regard, optimization of fast transesterification of waste cooking oil is very important. The goal of this research paper is therefore to determine the effect of important parameters such as methanol to oil molar ratio, catalyst concentration (potassium hydroxide), temperature, and horn position on oil conversion to methyl ester in ultrasonic mixing method. Result of experiments showed that the optimum conditions for the transesterification process have been obtained as molar ratio of alcohol to oil as 6:1, catalyst concentration of 1 wt.%, temperature as 45°C, and horn position at the interface of methanol to oil. The results show that the ultrasonic method decreases the reaction time as much as up to eight times compare to the conventional stirring. For practically evaluating the theoretical optimum point using genetic algorithm, the obtained values were verified experimentally. In order to perform this, the catalyst concentration, temperature, and the time of reaction were determined, and the values are 1%, 48°C, and 449s, respectively. For the obtained values, the biodiesel conversion was 93.2%, so that the experimental optimum value is closed to that of the theoretical values. As a result, experimental data confirmed the obtained values from optimization method in this research work.
Acknowledgments
This research work has been conducted at Biofuel Laboratories of Agriculture faculty of Tarbiat Modares University. Hereby the authors would also like to acknowledge the funds provided by Iranian Fuel Conservation Company (IFCO) to carry out this research work.
References
1. MaF, HannaMA. Biodiesel production: a review. Bioresour Technol1999;70:1–15.Suche in Google Scholar
2. XieWL, LiHT. Alumina-supported potassium iodide as a heterogeneous catalyst for biodiesel production from soybean oil. J Mol Catal A: Chem2006;255:1–9.10.1016/j.molcata.2006.03.061Suche in Google Scholar
3. SchuchardtU, SercheliR, VargasRM. Transesterification of vegetable oils: a review. J Braz Chem Soc1998;9:199–210.10.1590/S0103-50531998000300002Suche in Google Scholar
4. ChandP, ChintareddyVR, VerkadeJG, GrewellD. Enhancing biodiesel production from soybean oil using ultrasonics. Energy Fuels2010;24:2010–15.10.1021/ef9011752Suche in Google Scholar
5. TomasevicA, Siler-MarinkovicS. Methanolysis of used frying oil. Fuel Process Technol2003;81:1–6.10.1016/S0378-3820(02)00096-6Suche in Google Scholar
6. StavaracheC, VinatoruM, NishimuraR, MaedaY. Conversion of vegetable oil to biodiesel using ultrasonic irradiation. Chem Lett2003;32:716–17.10.1246/cl.2003.716Suche in Google Scholar
7. StavaracheC, VinatoruM, NishimuraR, MaedaY. Fatty acids methyl esters from vegetable oil by means of ultrasonic energy. Ultrason Sonochem2005;12:367–72.10.1016/j.ultsonch.2004.04.001Suche in Google Scholar PubMed
8. GhobadianB, RahimiH. Biofuels: past, present and future perspective. In: The 4th international Iran and Russia conference, Shahrekord, Iran, 8–10 Sept 2004.Suche in Google Scholar
9. ColucciJA, BorreroEE, AlapeF. Biodiesel from an alkaline transesterification reaction of soybean oil using ultrasonic mixing. Am Oil Chem Soc2005;82:525–30.10.1007/s11746-005-1104-3Suche in Google Scholar
10. JiJ. Preparation of biodiesel with help of ultrasonic and hydrodynamic cavitation. Ultrasonics2006;44:411–14.10.1016/j.ultras.2006.05.020Suche in Google Scholar PubMed
11. SuslickKS. Ultrasound: its chemical, physical and biological effects. New York: VCH Publishers, 1988.Suche in Google Scholar
12. MasonTJ. Sonochemistry. New York: Oxford University Press, 1999.Suche in Google Scholar
13. ErtlG, KnozingerH, WeitkampJ. Handbook of heterogeneous catalysis. Hielscher: Ringwood, NJ,1997; Ultrasonic laboratory devices (manual); Available at: www.hielscher.com; http://www.scs.uiuc.edu/suslick/pdf/hbhetcat.pdf.Suche in Google Scholar
14. SinghAK, FernandoSD, HernandezR. Base-catalyzed fast transesterification of soybean oil using ultrasonication. Energy Fuels2007;21:1161–4.10.1021/ef060507gSuche in Google Scholar
15. SanayeS, HajabdollahiH. Thermal-economic multi-objective optimization of plate fin heat exchanger using genetic algorithm. Appl Energy2010;87:1893–902.10.1016/j.apenergy.2009.11.016Suche in Google Scholar
16. WangJJ, JingYY, ZhangCF. Optimization of capacity and operation for CCHP system by genetic algorithm. Appl Energy2010;87:1325–35.10.1016/j.apenergy.2009.08.005Suche in Google Scholar
17. GoldbergDE, HollandJH. Genetic algorithms in search, optimization, and machine learning. Amsterdam, Netherlands: Kulwer Academic Publishers, 1988.Suche in Google Scholar
18. JenaPC, RahemanH, Prasanna KumarG, MachavaramR. Biodiesel production from mixture of Mahua and Simarouba oils with high free fatty acids. Biomass Bioenergy2010;34:1108–16.10.1016/j.biombioe.2010.02.019Suche in Google Scholar
19. RajendraM, JenaPC, RahemanH. Prediction of optimized pretreatment process parameters for biodiesel production using ANN and GA. Fuel2009;88:868–75.10.1016/j.fuel.2008.12.008Suche in Google Scholar
20. SaccoWF, PereiraCM, SoaresPP, SchirruR. Genetic algorithms applied to turbine extraction optimization of a pressurized-water reactor. Appl Energy2002;73:217–22.10.1016/S0306-2619(02)00122-8Suche in Google Scholar
21. VarunS. Thermal performance optimization of a flat plate solar air heater using genetic algorithm. Appl Energy2010;87:1793–9.10.1016/j.apenergy.2009.10.015Suche in Google Scholar
22. WangY, HeYL, MeiDH, TaoWQ. Optimization design of slotted fin by numerical simulation coupled with genetic algorithm. Appl Energy2011;88:4441–50.10.1016/j.apenergy.2011.05.030Suche in Google Scholar
23. ZengM, DuL, LiaoD, ChuW, WangQ, LuoY, et al.. Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and genetic algorithm methods. Appl Energy2012;92:725–32.10.1016/j.apenergy.2011.08.008Suche in Google Scholar
24. CanakciM, Van GerpenJ. A pilot plant to produce biodiesel from high free fatty acid feedstocks. Trans ASAE2003;46:945–54.10.13031/2013.13949Suche in Google Scholar
25. HuangY, LanY, ThomsonSJ, FangA, HoffmanWC, LaceyRE. Review: development of soft computing and applications in agricultural and biological engineering. Comput Electron Agric2010;71:107–27.10.1016/j.compag.2010.01.001Suche in Google Scholar
26. HinguSM, GogatePR, RathodVK. Synthesis of biodiesel from waste cooking oil using sonochemical reactors. Ultrason Sonochem2010;17:827–32.10.1016/j.ultsonch.2010.02.010Suche in Google Scholar PubMed
27. KimHJ, KangBS, KimMJ, ParkYM, KimDK, LeeJS, et al. Transesterification of vegetable oil to biodiesel using heterogeneous base catalyst. Catal Today2004;93–95:315–20.10.1016/j.cattod.2004.06.007Suche in Google Scholar
28 ] Anonymous.2009a. www.chemwiki.ucdavis.edu.Suche in Google Scholar
29. LeungDY, WuX, LeungM. A review on biodiesel production using catalyzed transesterification. Appl Energy2010;87:1083–95.10.1016/j.apenergy.2009.10.006Suche in Google Scholar
30. SharmaY, SinghB, UpadhyayS. Advancements in development and characterization of biodiesel: a review. Fuel2008;87:2355–73.10.1016/j.fuel.2008.01.014Suche in Google Scholar
31. KhatamifarM. Design, manufacturing and evaluation of a vegoil processor. A publication of Tarbiat Modarres University, Tehran, Iran, 2005.Suche in Google Scholar
©2014 by Walter de Gruyter Berlin / Boston
Artikel in diesem Heft
- Frontmatter
- Application of Finite Element Method for Modeling of Multi-tube Fixed Bed Catalytic Reactors
- Using a Fractional Experimental Design for the Study of the Tensile Strength of a Film of Polyethylene Plastic Degradable
- CFD Modeling and Experimental Study of a Spray Dryer Performance
- Computational Antioxidant Capacity Simulation (CAOCS): A Novel Framework of Antioxidant Capacity Profiling
- WPC Soft: Prototype Simulation Software to Predict the Internal Changes During Hot Pressing of Wood Plastic Composites
- Genetic Algorithm Approach to Optimize Biodiesel Production by Ultrasonic System
- Classical and Neural Network–Based Approach of Model Predictive Control for Binary Continuous Distillation Column
- Modeling, Simulation, and Configuration Improvement of Horizontal Ammonia Synthesis Reactor
Artikel in diesem Heft
- Frontmatter
- Application of Finite Element Method for Modeling of Multi-tube Fixed Bed Catalytic Reactors
- Using a Fractional Experimental Design for the Study of the Tensile Strength of a Film of Polyethylene Plastic Degradable
- CFD Modeling and Experimental Study of a Spray Dryer Performance
- Computational Antioxidant Capacity Simulation (CAOCS): A Novel Framework of Antioxidant Capacity Profiling
- WPC Soft: Prototype Simulation Software to Predict the Internal Changes During Hot Pressing of Wood Plastic Composites
- Genetic Algorithm Approach to Optimize Biodiesel Production by Ultrasonic System
- Classical and Neural Network–Based Approach of Model Predictive Control for Binary Continuous Distillation Column
- Modeling, Simulation, and Configuration Improvement of Horizontal Ammonia Synthesis Reactor