Low-Cost Head Phantom for the Evaluation and Optimization of Rf-Links in Ophthalmic Implants

Artikel in diesem Heft

1. Biocompatibility Material Test for Cardiovascular Devices using Stagnation Point Flow
2. A Substrate Isolated LDO for an Inductively Powered Retinal Implant
3. Implantable Silicone Electrode for Measurement of Muscle Activity: Results of First in Vivo Evaluation
4. Minimal Invasive Pelvic Neuromonitoring – Technical Demands and Requirements
5. A High-Voltage Neural Stimulator Combined with a Low-Voltage Recorder
6. Enhanced power management unit for the Artificial Accommodation System
7. Mikrosystemintegration im Herausnehmbaren Zahnersatz
8. A Novel Total Artificial Heart for Destination Therapy: In-Vitro and In-Vivo Study
9. Investigating the Applicability of Fluidized-Bed Technology for High-Throughput Coating of Stents
10. Online Detection of Stent Fractures in Durability Tests by Monitoring the Electrical Resistance
11. In Vitro Rabbit Drug Cytotoxicity Model for Fibrosis Prevention in Glaucoma Surgery
12. Low-Cost Head Phantom for the Evaluation and Optimization of Rf-Links in Ophthalmic Implants
13. Mechanical Properties of a Photopolymerizable Hydrogel for Intervertebral Disc Replacement
14. A setup for ultrasound based assessment of the aortic root geometry
15. Development of Multi-Channel Intramuscular EMG Recording Electrodes
16. Impact of Crimping Procedure and Storage on the Mechanical Performance of Peripheral Drug-Eluting Stents
17. Comparison of Different Conductive Fillers in Silicone for the Purpose of Replacing Metallic Conductive Structures in Flexible Implants
18. Feasibility of Polymer/Drug Coating on Absorbable and Permanent Stent Platforms - Technological Challenges
19. A Novel Bioactive Implant Material Based on a Porous Siliconehydrogel- Composite
20. Satisfaction of Prosthesis Users with Electrical Hand Prostheses and their Sugggested Improvements
21. Development and evaluation of a silicone-based ferrite cover to optimize the transmission-characteristics of telemetric interfaces for active medical Implants
22. Determination of Geometry Parameters of the Ossicular Chain Based on 3D Models from Micro-Ct-Scans