Construction of a Spectrometer to Measure the Cotton-Mouton Effect of Superparamagnetic Iron Oxide Nanoparticles

Artikel in diesem Heft

1. Characterisation of Cell Growth on Titanium Scaffolds Made by Selective Laser Melting for Tissue Engineering
2. Surface Patterning Of Cochlear Implant Electrode Arrays
3. The Biodegradable Magnesium Stent as an Alternative Treatment in Cases of Chronic Ventilation Disorders of the Paranasal Sinuses
4. Nanoporous Silica Films as Novel Biomaterial: Applications in the Middle Ear
5. Different cell populations are inducible by BMP-2 covalently covered Bioverit® II implants in rabbit subcutis and middle ear
6. Biofunctionalization of Polymer Implant Surfaces: From Drug Delivery to Stable Surface Functionality
7. Parameters of Endothelial Function are Dependent on Polymeric Surface Material
8. New Developments in Device-Associated Bloodstream Infections
9. Development of a Test Facility for Microfluidic Characterization of Glaucoma Drainage Devices
10. Development of an Injectable Polymer-Based Local Drug Delivery System for Subconjunctival Treatment of Glaucoma
11. Influence of Heat Treatment on the Degradation Behaviour of Degradable Magnesium Based Implants
12. The Influence of Machining on Residual Stresses and Corrosion Behavior of MgLa2 Osteosynthesis Plates
13. Applicability of Degradable Magnesium LAE442 Alloy Plate-Screw-Systems in a Rabbit Model
14. Influence of Shot Peening on Surface Roughness and Invitro Load Cycles of Magnesium Alloys
15. Finite element simulation of myocardial stabilising structures and development of new designs
16. Preparation and Analysis of PCL Spun Chitosan Scaffolds as Guidance Channels for Peripheral Nerve Regeneration
17. Proof of Concept of a New Glucose Sensing Technology: Color-Changing Hydrogels Including au Nanoparticles
18. Design of Antibacterial Copolymers for Implant Coatings
19. Solving Biocompatibility Layer by Layer: Designing Scaffolds for Tissues
20. Magnesium as a biomaterial and its biological interactions
21. Fluid Dynamic Load of Polymers Used as Encapsulation Material for Implantable Microsystems
22. Spider Silk – a Versatile Biomaterial for Tissue Engineering and Medical Applications
23. 3D printed chitosan / hydroxyapatite scaffolds for potential use in regenerative medicine
24. Monitoring Polyelectrolyte Multilayer Assembly and Stability on Non-Transparent Rough Metal Surfaces
25. Entwicklung von schichtweise ausgerichteten Faserverbundstrukturen
26. Evaluating a Novel Class of Biomaterials: Magnesium-Containing Layered Double Hydroxides
27. Finite Element Study of Degradable Intramedullary Nails out of Magnesium Alloy for Ovine Tibiae
28. Resorbable Interference Screws Made of Magnesium Based Alloy
29. Comparison between simulation results and DEXA investigation of the bone remodelling after implanting a cementless long stem hip prosthesis
30. Patient-Individual Hip Cups: Simulation-Based Design and Sheet Metal Forming Manufacturing
31. Ceramic-on-ceramic material pairings under simplified knee replacement conditions show increasing wear with increasing conformity
32. Stiffness Properties of a Shape-Changing Implant for Fracture Fixation: A Preliminary Study
33. Development Of A Tunable Drug Delivery System From Biodegradable Scaffolds Via Layer By Layer Deposition
34. Continuative Studies for Inserting Stimulus-Responsive Functions in Hydrogels for Local Drug Delivery
35. Plasma Nanofilms as Biocompatible and Antibacterial Coatings for Biosensors
36. Coating Thickness Determination on Drug-Eluting Stents - Comparison of Methods
37. Establishment of an in vitro evaluation system for drug-coated ballons
38. Release of 125I-RhBMP-2 from Foamed Poly-(D,L)-Lactide
39. Machining of Biocompatible Polymers with Shaped Femtosecond Laser Pulses
40. Production of Multimodal Embolisation Particles – Challenges and Possibilities
41. Monitored Water Vapour Barrier Coatings for Flexible Micro-Implants
42. Effects of laser parameters and scanning strategy on structural and mechanical properties of 3D NiTi implants fabricated with selective laser melting
43. Impact of Sterilization Procedures on the Stability of Parylene Based Flexible Multilayer Structures
44. Infiltration of 3D printed tricalciumphosphate scaffolds with biodegradable polymers and biomolecules for local drug delivery
45. Steering of an electrospinning jet by dynamic manipulation of the electric field
46. Enhanced Endothelialization of PCL Through Chemical Activation, Protein Precoating and VEGF Stimulation
47. Machining of Biocompatible Ceramics with Femtosecond Laser Pulses
48. Quasi-Continuous Particle Size Characterisation During Accelerated Stent Radial Fatigue Test
49. Influence of HDI Fixation on the Mechanical Properties of Porcine Pericardial Tissue for Heart Valve Engineering
50. Adjustment of the Mechanical Properties of Silicone for Applications in the Middle Ear
51. Antibacterial Silica Nanoparticles with PH-Sensitive Release Proprieties as Fillers for Dental Composite Materials
52. Investigation of in Vitro Drug Release Behaviour of Drug-Eluting Stents Using a Perfusion Culture System
53. Stability Analysis Of Superparamagnetic Iron Oxide Nanoparticles (Spions) At 37 °C
54. Investigation of Different Tissue Samples with ΜCT and MPS for Determination of Iron Oxide Concentration in Tracers for MPI
55. Specific Surface Modification Of Cochlear Implant Electrode Carriers For Enhancement Of Spiral Ganglion Cell Growth
56. Construction of a Spectrometer to Measure the Cotton-Mouton Effect of Superparamagnetic Iron Oxide Nanoparticles
57. Dynamische In-Vitro-Studie zur Strömungsabhängigkeit der Degradationsrate von Magnesium
58. Biocompatibility evaluation of MEMS packaging materials for implantable devices
59. Large Scale Preparation and Analysis of Hyperhydrophilic Dental Implants with μSLA Titanium Surface
60. Characterization of New Biodegradable Magnesiumalloys
61. Evaluation and comparison of in vitro and in vivo degradation kinetics of magnesium