Home Pressure Recovery of Collectors with Annular Curved Diffusers
Article
Licensed
Unlicensed Requires Authentication

Pressure Recovery of Collectors with Annular Curved Diffusers

  • Y. Senoo, and N. Kawaguchi,
Published/Copyright: December 1, 1987
Become an author with De Gruyter Brill
Author Information
International Journal of Turbo and Jet Engines
From the journal International Journal of Turbo and Jet Engines Volume 4 Issue 3-4

Published Online: 1987-12

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. CONTENTS
  2. Pressure Recovery of Collectors with Annular Curved Diffusers
  3. Application of Vortex Generators in Flow Control of the Inlet
  4. Research on Supersonic Diffusers of Centrifugal Compressor by Means of Swirl Flow (1st Report) Flow in a Diffuser at Various Mach Numbers
  5. Spray Drop Size and Velocity Measurements Using the Phase/Doppler Particle Analyzer
  6. Inverse Design Calculations for Transonic Cascades
  7. An Experimental Study of the Mixing by an Acoustically Pulsed Axisymmetrical Air-Jet
  8. Full-Coverage Film Cooling: A One-Equation Model of Turbulence for the Calculation of the Full-Coverage and the Recovery-Region Hydrodynamics
  9. Numerical Modeling of Afterburner Combustion
  10. Improvement of Pump Performance at Off-Design Conditions
  11. Blade Vibration on Centrifugal Compressors - Blade Response to Different Excitation Conditions
  12. Classroom Analysis and Design of Axial Flow Compressors Using a Streamline Analysis Model
  13. On the Thermodynamic Properties of Combustion Gases
  14. Development of an Analytical Model to Assess Fuel Property Effects on Combustor Performance
  15. Vapor Deposition and Condensate Flow on Combustion Turbine Blades: Theoretical Model to Predict/ Understand Some Corrosion Rate Consequences of Molten Alkali Sulfate Deposition in the Field or Laboratory
  16. Concerning the Problems in Comparison of Drop Number Distribution Obtained by Spatial and Temporal Methods
  17. An Analysis of Applicability of Surge/Stall Criterion to Engineering Problems
https://doi.org/10.1515/TJJ.1987.4.3-4.181

Articles in the same Issue

  1. CONTENTS
  2. Pressure Recovery of Collectors with Annular Curved Diffusers
  3. Application of Vortex Generators in Flow Control of the Inlet
  4. Research on Supersonic Diffusers of Centrifugal Compressor by Means of Swirl Flow (1st Report) Flow in a Diffuser at Various Mach Numbers
  5. Spray Drop Size and Velocity Measurements Using the Phase/Doppler Particle Analyzer
  6. Inverse Design Calculations for Transonic Cascades
  7. An Experimental Study of the Mixing by an Acoustically Pulsed Axisymmetrical Air-Jet
  8. Full-Coverage Film Cooling: A One-Equation Model of Turbulence for the Calculation of the Full-Coverage and the Recovery-Region Hydrodynamics
  9. Numerical Modeling of Afterburner Combustion
  10. Improvement of Pump Performance at Off-Design Conditions
  11. Blade Vibration on Centrifugal Compressors - Blade Response to Different Excitation Conditions
  12. Classroom Analysis and Design of Axial Flow Compressors Using a Streamline Analysis Model
  13. On the Thermodynamic Properties of Combustion Gases
  14. Development of an Analytical Model to Assess Fuel Property Effects on Combustor Performance
  15. Vapor Deposition and Condensate Flow on Combustion Turbine Blades: Theoretical Model to Predict/ Understand Some Corrosion Rate Consequences of Molten Alkali Sulfate Deposition in the Field or Laboratory
  16. Concerning the Problems in Comparison of Drop Number Distribution Obtained by Spatial and Temporal Methods
  17. An Analysis of Applicability of Surge/Stall Criterion to Engineering Problems
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 4.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/TJJ.1987.4.3-4.181/pdf
Scroll to top button