STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY

Ikonomopoulos G.,; Marchetti M.,

doi:10.1515/SECM.1999.8.2.83

Home STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY

Article Open Access

STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY

Ikonomopoulos G., and Marchetti M.,

Published/Copyright: April 1, 1999

Download Article (PDF)

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Science and Engineering of Composite Materials Volume 8 Issue 2

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

G.,, Ikonomopoulos and M.,, Marchetti. "STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY" Science and Engineering of Composite Materials, vol. 8, no. 2, 1999, pp. 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

G.,, I. & M.,, M. (1999). STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY. Science and Engineering of Composite Materials, 8(2), 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

G.,, I. and M.,, M. (1999) STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY. Science and Engineering of Composite Materials, Vol. 8 (Issue 2), pp. 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

G.,, Ikonomopoulos and M.,, Marchetti. "STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY" Science and Engineering of Composite Materials 8, no. 2 (1999): 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

G., I, M., M. STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY. Science and Engineering of Composite Materials. 1999;8(2): 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 1999-04

Articles in the same Issue

TABLE OF CONTENTS
The Effect of the Chemical Metamerism Polyolefin on the Friction and Wear of Bronze Powder Filled High Density Polyethylene
STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY
The Accumulated Dissipated Energy of Composites Under Fatigue Loadings
Brazing of Silicon Nitride with Reactive Filler Metals
Deep Drawing Simulation of Knitted Fabric Composites Considering Geometrical Non-Linearity

Search journal Search the content of this journal

https://doi.org/10.1515/SECM.1999.8.2.83

Creative Commons

BY-NC-ND 3.0

Articles in the same Issue

TABLE OF CONTENTS
The Effect of the Chemical Metamerism Polyolefin on the Friction and Wear of Bronze Powder Filled High Density Polyethylene
STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY
The Accumulated Dissipated Energy of Composites Under Fatigue Loadings
Brazing of Silicon Nitride with Reactive Filler Metals
Deep Drawing Simulation of Knitted Fabric Composites Considering Geometrical Non-Linearity