The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites

R.S. Bailey,; G. v. Bradsky,; S.I. Naqui,; I.M. Robinson,; J.M. Robinson,

doi:10.1515/SECM.1994.3.2.67

Startseite The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites

Artikel Open Access

The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites

R.S. Bailey, , G. v. Bradsky, , S.I. Naqui, , I.M. Robinson, und J.M. Robinson,

Veröffentlicht/Copyright: 1. Juni 1994

Artikel downloaden (PDF)

Veröffentlicht von

Veröffentlichen auch Sie bei De Gruyter Brill

Manuskript einreichen Informationen für Autor*innen

Aus der Zeitschrift Science and Engineering of Composite Materials Band 3 Heft 2

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Bailey,, R.S., Bradsky,, G. v., Naqui,, S.I., Robinson,, I.M. and Robinson,, J.M.. "The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites" Science and Engineering of Composite Materials, vol. 3, no. 2, 1994, pp. 67-94. https://doi.org/10.1515/SECM.1994.3.2.67

Bailey,, R., Bradsky,, G., Naqui,, S., Robinson,, I. & Robinson,, J. (1994). The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites. Science and Engineering of Composite Materials, 3(2), 67-94. https://doi.org/10.1515/SECM.1994.3.2.67

Bailey,, R., Bradsky,, G., Naqui,, S., Robinson,, I. and Robinson,, J. (1994) The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites. Science and Engineering of Composite Materials, Vol. 3 (Issue 2), pp. 67-94. https://doi.org/10.1515/SECM.1994.3.2.67

Bailey,, R.S., Bradsky,, G. v., Naqui,, S.I., Robinson,, I.M. and Robinson,, J.M.. "The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites" Science and Engineering of Composite Materials 3, no. 2 (1994): 67-94. https://doi.org/10.1515/SECM.1994.3.2.67

Bailey, R, Bradsky, G, Naqui, S, Robinson, I, Robinson, J. The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites. Science and Engineering of Composite Materials. 1994;3(2): 67-94. https://doi.org/10.1515/SECM.1994.3.2.67

Kopie

In die Zwischenablage kopiert

BibTeX EndNote RIS

Published Online: 1994-06

Artikel in diesem Heft

TABLE OF CONTENTS
The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites
Statistical Model of Fracture in Materials with Disordered Microstructure
Observation of Internal Damage and Inelastic Deformation of Graphite/Epoxy Tubes [±45°]4 under Cyclic Axial Loading
Energetic Criterion for Soft Laminae Adhesive Joint Strength
Electroplating Graphite Powder with Metals and Its Use in Microwave Absorbing Composite Material

Zeitschrift durchsuchen In dieser Zeitschrift suchen

https://doi.org/10.1515/SECM.1994.3.2.67

Creative Commons

BY-NC-ND 3.0

Artikel in diesem Heft

TABLE OF CONTENTS
The Influence of Multilive Feed Processing and Fibre Length on the Stiffness and Strength of Injection Moulded 50% w/w Glass/Nylon 6,6 Composites
Statistical Model of Fracture in Materials with Disordered Microstructure
Observation of Internal Damage and Inelastic Deformation of Graphite/Epoxy Tubes [±45°]4 under Cyclic Axial Loading
Energetic Criterion for Soft Laminae Adhesive Joint Strength
Electroplating Graphite Powder with Metals and Its Use in Microwave Absorbing Composite Material