The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin

E.M. Lee,; M.W. Choi,; H.M. Jeong,; B.K. Kim,

doi:10.1515/POLYENG.2010.30.9.549

Home The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin

Article

Licensed

Unlicensed Requires Authentication

The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin

E.M. Lee, , M.W. Choi, , H.M. Jeong, and B.K. Kim,

Published/Copyright: November 1, 2010

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Journal of Polymer Engineering Volume 30 Issue 9

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Lee,, E.M., Choi,, M.W., Jeong,, H.M. and Kim,, B.K.. "The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin" Journal of Polymer Engineering, vol. 30, no. 9, 2010, pp. 549-564. https://doi.org/10.1515/POLYENG.2010.30.9.549

Lee,, E., Choi,, M., Jeong,, H. & Kim,, B. (2010). The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin. Journal of Polymer Engineering, 30(9), 549-564. https://doi.org/10.1515/POLYENG.2010.30.9.549

Lee,, E., Choi,, M., Jeong,, H. and Kim,, B. (2010) The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin. Journal of Polymer Engineering, Vol. 30 (Issue 9), pp. 549-564. https://doi.org/10.1515/POLYENG.2010.30.9.549

Lee,, E.M., Choi,, M.W., Jeong,, H.M. and Kim,, B.K.. "The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin" Journal of Polymer Engineering 30, no. 9 (2010): 549-564. https://doi.org/10.1515/POLYENG.2010.30.9.549

Lee, E, Choi, M, Jeong, H, Kim, B. The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin. Journal of Polymer Engineering. 2010;30(9): 549-564. https://doi.org/10.1515/POLYENG.2010.30.9.549

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2010-11

You are currently not able to access this content.

Articles in the same Issue

CONTENTS
Control of Polymer Gel Surface Pattern Formation and its Three Dimensional Measurement Method
Cure Kinetics of Biphenyl Epoxydized Novolac Resin
The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin
Stress-strain Behavior of CdS/PMMA Nano-composite
Thermal and Mechanical Behavior of Polymer Nano-composite
Influence of the PET Material Grade on the Energy Efficiency of the Reheat Phase in the Two-stage Stretch Blow Moulding Process

Search journal Search the content of this journal

https://doi.org/10.1515/POLYENG.2010.30.9.549

Articles in the same Issue

CONTENTS
Control of Polymer Gel Surface Pattern Formation and its Three Dimensional Measurement Method
Cure Kinetics of Biphenyl Epoxydized Novolac Resin
The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin
Stress-strain Behavior of CdS/PMMA Nano-composite
Thermal and Mechanical Behavior of Polymer Nano-composite
Influence of the PET Material Grade on the Energy Efficiency of the Reheat Phase in the Two-stage Stretch Blow Moulding Process