Home Cure Kinetics of Biphenyl Epoxydized Novolac Resin
Article
Licensed
Unlicensed Requires Authentication

Cure Kinetics of Biphenyl Epoxydized Novolac Resin

  • X. Zeng, , R. Sun, , S. Yu, and X. Xia,
Published/Copyright: November 1, 2010
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Journal of Polymer Engineering
From the journal Journal of Polymer Engineering Volume 30 Issue 9

Published Online: 2010-11

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. CONTENTS
  2. Control of Polymer Gel Surface Pattern Formation and its Three Dimensional Measurement Method
  3. Cure Kinetics of Biphenyl Epoxydized Novolac Resin
  4. The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin
  5. Stress-strain Behavior of CdS/PMMA Nano-composite
  6. Thermal and Mechanical Behavior of Polymer Nano-composite
  7. Influence of the PET Material Grade on the Energy Efficiency of the Reheat Phase in the Two-stage Stretch Blow Moulding Process
https://doi.org/10.1515/POLYENG.2010.30.9.535

Articles in the same Issue

  1. CONTENTS
  2. Control of Polymer Gel Surface Pattern Formation and its Three Dimensional Measurement Method
  3. Cure Kinetics of Biphenyl Epoxydized Novolac Resin
  4. The Effect of Temperature and Gel Concentration on the Rheological Properties of Ultra High Molecular Weight Polyethylene (UHMWPE) in Decalin
  5. Stress-strain Behavior of CdS/PMMA Nano-composite
  6. Thermal and Mechanical Behavior of Polymer Nano-composite
  7. Influence of the PET Material Grade on the Energy Efficiency of the Reheat Phase in the Two-stage Stretch Blow Moulding Process
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 8.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/POLYENG.2010.30.9.535/html
Scroll to top button