Article Open Access

Joining of Si3N4 to Si3N4 with Partially Crystallized Cordierite Glass or Oxynitride Glass Solders

  • and
Published/Copyright: May 6, 2011
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 17 Issue 4

Published Online: 2011-05-06
Published in Print: 1998-10

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. SiO2-CaO-Al2O3 Glass Solder for Joining of Al2O3 to Al2O3
  3. Oxidation of Cr94Fe5(Y2O3)1 at High Temperatures
  4. Chronoamperometric Evaluation of Sensitization of SUS 316 Stainless Steel
  5. A Numerical Model to Predict the Kinetics of Anisothermal Oxidation of Metals
  6. Effect of Precipitation on the Bulk Hardness and the Ultimate Tensile Strength of a 6061/SiC Composite
  7. Joining of Si3N4 to Si3N4 with Partially Crystallized Cordierite Glass or Oxynitride Glass Solders
  8. Synthesis and Thermal Properties of Ni-Alloy/Al2O3 Cermets for Interconnector Materials in Solid Oxide Fuel Cells
  9. Carbon Solution in Liquid Iron and Iron Alloys
  10. Sliding Wear Studies In Epoxy Containing Alumina Powders
  11. Numerical Modeling Of Granular/Particulate Systems By Discrete Element Method
  12. Comparison of Substructures in High Temperature Deformed Aluminium Alloys by Polarised Optical, Scanning and Transmission Electron Microscopes
  13. Experimental Studies of Heat Capacities of Nd2Fe17, Nd2Fe17N1.49 and Nd2Fe17N1.75 Alloys in the Temperature Range 273-773 Κ
  14. Microparticulate Emissions in 2195 Aluminum-Lithium Alloy Weldments
https://doi.org/10.1515/HTMP.1998.17.4.245
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. SiO2-CaO-Al2O3 Glass Solder for Joining of Al2O3 to Al2O3
  3. Oxidation of Cr94Fe5(Y2O3)1 at High Temperatures
  4. Chronoamperometric Evaluation of Sensitization of SUS 316 Stainless Steel
  5. A Numerical Model to Predict the Kinetics of Anisothermal Oxidation of Metals
  6. Effect of Precipitation on the Bulk Hardness and the Ultimate Tensile Strength of a 6061/SiC Composite
  7. Joining of Si3N4 to Si3N4 with Partially Crystallized Cordierite Glass or Oxynitride Glass Solders
  8. Synthesis and Thermal Properties of Ni-Alloy/Al2O3 Cermets for Interconnector Materials in Solid Oxide Fuel Cells
  9. Carbon Solution in Liquid Iron and Iron Alloys
  10. Sliding Wear Studies In Epoxy Containing Alumina Powders
  11. Numerical Modeling Of Granular/Particulate Systems By Discrete Element Method
  12. Comparison of Substructures in High Temperature Deformed Aluminium Alloys by Polarised Optical, Scanning and Transmission Electron Microscopes
  13. Experimental Studies of Heat Capacities of Nd2Fe17, Nd2Fe17N1.49 and Nd2Fe17N1.75 Alloys in the Temperature Range 273-773 Κ
  14. Microparticulate Emissions in 2195 Aluminum-Lithium Alloy Weldments
Downloaded on 5.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/HTMP.1998.17.4.245/html
Scroll to top button