Skip to main content
Article Open Access

Liquid Phase Separation in Cu-Co-Fe and Cu-Fe-Ni-Cr Alloys

  • , , and
Published/Copyright: May 6, 2011
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 15 Issue 3

Published Online: 2011-05-06
Published in Print: 1996-07

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. CONTENTS
  2. Intergranular Grooving During Oxidation of Intermetallics
  3. A New Method of Pack Aluminization
  4. Characterization of a Co84Nb10B6 Metallic Glass
  5. Modeling the Viscosity Temperature Dependence of Liquid Alloys
  6. Chemical Vapor Deposition Methods for Preparation of Radioactively Doped Thin Films
  7. Preparation of Nested Fullerenes and Nanotubes of MoS2
  8. Equilibrium Vacancies and Properties of Metals at High Temperatures
  9. The Structure and Properties of Hypervelocity Oxy-Fuel (HVOF) Sprayed Coatings
  10. Liquid Phase Separation in Cu-Co-Fe and Cu-Fe-Ni-Cr Alloys
  11. The Role of Alloying Elements on γ' Phase Growth Kinetics in Ni-Base Alloys
  12. Laser Cladding and Alloying for Refrubishing Worn Machine Parts
  13. Phase Growth Induced Stresses During Grain Boundary Diffusion
  14. Microstructure of CoAl-Co Intermetallic-Matrix Composite After Different Heat Treatments
  15. Optimizing the Tungsten Deposition Process
https://doi.org/10.1515/HTMP.1996.15.3.187
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. CONTENTS
  2. Intergranular Grooving During Oxidation of Intermetallics
  3. A New Method of Pack Aluminization
  4. Characterization of a Co84Nb10B6 Metallic Glass
  5. Modeling the Viscosity Temperature Dependence of Liquid Alloys
  6. Chemical Vapor Deposition Methods for Preparation of Radioactively Doped Thin Films
  7. Preparation of Nested Fullerenes and Nanotubes of MoS2
  8. Equilibrium Vacancies and Properties of Metals at High Temperatures
  9. The Structure and Properties of Hypervelocity Oxy-Fuel (HVOF) Sprayed Coatings
  10. Liquid Phase Separation in Cu-Co-Fe and Cu-Fe-Ni-Cr Alloys
  11. The Role of Alloying Elements on γ' Phase Growth Kinetics in Ni-Base Alloys
  12. Laser Cladding and Alloying for Refrubishing Worn Machine Parts
  13. Phase Growth Induced Stresses During Grain Boundary Diffusion
  14. Microstructure of CoAl-Co Intermetallic-Matrix Composite After Different Heat Treatments
  15. Optimizing the Tungsten Deposition Process
Downloaded on 16.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/HTMP.1996.15.3.187/html
Scroll to top button