Relative fungal efficacy results from the soil block test with a long incubation period of three commercial copper wood preservatives
-
Tor P. Schultz
und
Darrel D. Nicholas
Abstract
Development of new wood preservative systems is a lengthy and expensive endeavor. This study examined soil block experiments with a longer incubation time than typical to make the test harsher, using commercial particulate copper azole (PCA), soluble copper azole (CA-C), and soluble alkaline copper quaternary (ACQ-D) systems. Both the CA-C and PCA systems performed poorly compared to ACQ-D with two copper tolerant fungi, even at retentions well above the specified ground-contact residential level, i.e., Use Category 4A (UC4A). With the one copper sensitive fungus examined, PCA and ACQ-D prevented decay at about half the UC4A retention. To compare these laboratory efficacy results, data from an outdoor accelerated post test with a copper tolerant fungus gave efficacies of ACQ > CA-C >> PCA, with PCA having significantly more decay than the two soluble copper systems. Further confirmation was obtained from recently published E7 stake data conducted at a site with extensive copper tolerant fungi, which suggested that ACQ performed better than PCA and CA-B after about 3 years of exposure in agreement with the harsh soil block results with the two copper-tolerant fungi. Conversely, results from four other sites without a history of extensive copper tolerant fungi are interpreted that all three systems generally performed adequately, which is compatible with the soil block test with the one copper sensitive fungus examined.
©2012 by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Original Papers
- Oxidative stabilisation of kraft lignin for carbon fibre production
- Antithrombotic properties of sulfated wood-derived galactoglucomannans
- Recycling potential of unbleached and bleached chemical pulps from juvenile and mature wood of Populus deltoides
- Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy
- Characterization of phenolic compounds from inner bark of Betula pendula
- Identification and functional characterization of a sesquiterpene synthase gene from Eleutherococcus trifoliatus
- Microstructure and stiffness of Scots pine (Pinus sylvestris L) sapwood degraded by Gloeophyllum trabeum and Trametes versicolor – Part I: Changes in chemical composition, density and equilibrium moisture content
- Changes in microstructure and stiffness of Scots pine (Pinus sylvestris L) sapwood degraded by Gloeophyllum trabeum and Trametes versicolor – Part II: Anisotropic stiffness properties
- Off-axis Young’s modulus and off-axis shear modulus of wood measured by flexural vibration tests
- Empirical models for radial and tangential fibre width in tree rings of Norway spruce in north-western Europe
- Automatic grain texture analysis using integral transforms
- The fungal resistance of wood modified with glutaraldehyde
- Relative fungal efficacy results from the soil block test with a long incubation period of three commercial copper wood preservatives
- Uneven distribution of preservative in kiln-dried sapwood lumber of Scots pine: Impact of wood structure and resin allocation
- Utilization of surfactants for consolidation of wooden work of art
- Screening for xylanase and β-xylosidase production from wood-inhabiting Penicillium strains for potential use in biotechnological applications
- Short Note
- Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood
- Meetings
- Meetings
Artikel in diesem Heft
- Original Papers
- Oxidative stabilisation of kraft lignin for carbon fibre production
- Antithrombotic properties of sulfated wood-derived galactoglucomannans
- Recycling potential of unbleached and bleached chemical pulps from juvenile and mature wood of Populus deltoides
- Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy
- Characterization of phenolic compounds from inner bark of Betula pendula
- Identification and functional characterization of a sesquiterpene synthase gene from Eleutherococcus trifoliatus
- Microstructure and stiffness of Scots pine (Pinus sylvestris L) sapwood degraded by Gloeophyllum trabeum and Trametes versicolor – Part I: Changes in chemical composition, density and equilibrium moisture content
- Changes in microstructure and stiffness of Scots pine (Pinus sylvestris L) sapwood degraded by Gloeophyllum trabeum and Trametes versicolor – Part II: Anisotropic stiffness properties
- Off-axis Young’s modulus and off-axis shear modulus of wood measured by flexural vibration tests
- Empirical models for radial and tangential fibre width in tree rings of Norway spruce in north-western Europe
- Automatic grain texture analysis using integral transforms
- The fungal resistance of wood modified with glutaraldehyde
- Relative fungal efficacy results from the soil block test with a long incubation period of three commercial copper wood preservatives
- Uneven distribution of preservative in kiln-dried sapwood lumber of Scots pine: Impact of wood structure and resin allocation
- Utilization of surfactants for consolidation of wooden work of art
- Screening for xylanase and β-xylosidase production from wood-inhabiting Penicillium strains for potential use in biotechnological applications
- Short Note
- Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood
- Meetings
- Meetings
